Result: knobs

I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. | I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. Can you help? | Hello Kenneth. I...

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

I also need a control knob for opening and closing the vent. And, a spare tire and rim, a Loadstar K550, ST205/75, D15. | I have a 2010 Royal Cargo trailer and I need a replacement vent top. Metal, if available, but plastic...

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. It is a 5/8 inch coarse threaded bolt. | What is the thread size of this hand wheel....

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. it is a 5/8 inch coarse threaded bolt. If this will not work, let me know the brand coupler you have, the capacity, and the ball size it is for and I can determine if we have something that will work. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

What about the spring that I assume activates the in-gear/out knob. Any issues there, or with the in-out pull handle mechanism? | Before purchasing one of these am looking for weaknesses/plusses. On the Fulton 2-spd, is the...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

To stop you would need to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. I have attached the mounting hole pattern for this winch as well. | I see very little choice in...

If you want to try to have some control unloading/loading, you will have to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. The winch does come with a 2 inch by 20 foot strap with a 2,000 pound capacity. |

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |

Lastly, do not forget you will need a brake controller installed in your tow vehicle to operate the electric brakes, such as the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. If you could please provide the year, make, and model of your tow vehicle, I would be happy to see if we have a vehicle-specific pigtail available to make the installation much easier. |