Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

It contains both the wedges and the knobs for both mirrors. | I need to buy the replacement accessories knob and Wedge for the Cipa Custome Slide Mirrors part #11600-PR. Is the accessory #11603 the part that I want? | Yes,...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

| The knob of the CIPA Mirror part # CM11300 will tighten through the outer housing and then the stud of the knob will put pressure on the shoe of the mirror which will hold it securely to the mirror of your 2012 Toyota Tundra. |

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

I already have a pair of mirrors for towing, but lost the two fasteners and knobs. Is it possible to purchase only that portion? | I already have a pair of mirrors for towing, but lost the two fasteners and knobs. Is it possible...

When you are ready to remove the mirror, you just unscrew the knob and slide the mirror off. The matching passenger side mirror is # CM11302. | Can you remove the mirror extenders for Toyota Sequoia 2008 when you are not using...

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

I need another screw knob for one of my mirrors. Model Number 10900. | I need another screw knob for one of my mirrors. Model Number 10900. It came off and it was lost. | For your CIPA Tow Mirror set part # CM10900 we...

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

The CIPA Custom Towing Mirrors part # CM11400 are designed to slide over your factory mirrors and then tighten in place using the adjustment knob once in the correct position. As the fit is rather loose until the adjustment knob has been tighten, it should not cause any damage to your factory mirrors. |

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

I dont want the clip on, I want the one that covers the mirror and has the knob to twist to secure it on. | Im looking for extenders for a 2017 Titan. I dont want the clip on, I want the one that covers the mirror and has the...

This very close match means that only a little bit of tension on the set screw/knob is needed to secure the mirrors to the vehicle but they will slip off easily once you release the knob tension. | I watched...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

The use a clip that secures to the stock mirror housing and a knob to tighten it down. I have linked a video showing installation of these mirrors as well. | first when I called they made me listen to sales pitch and they never...

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

I would replace that with a screw and knob. This would make use of the mirror perfect. | What is the length and size of the set screw used to secure the mirror to the windshield? I would replace that with a screw and knob....

There is a wedge included with towing mirrors # CM11550 that fits between the factory side mirror housing and the inside of the towing mirrors that gets tightened using a knob that will thread through the backs of the towing mirrors to hold the mirrors in place. |

There is a kit that contains new knobs, felt, and the wedges or brackets that will fit CIPA towing mirror # 11801. | Can the little bracket that the thumb screw seats against to hold the mirror onto the truck mirror be bought...