Result: knobs

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

The main unit is hidden so the only thing you see is the control knob in the dash. The knob acts as the override and controls the brake power. | Hello, I am looking for recommendations on a brake controller...

The Redarc is great as it only uses a small visible knob rather than a large box that sticks out on your dash. | I need some advice on how configure/ set up my 2021 Jeep gladiator sport with 3.6 v6 and max tow package, 4.10...

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

You can use the Mounting Panel # 331-TPSI-002 to place the control knob in an open slot on your dash for a factory appearance. | Similar to planning on towing a 2022/23 Coleman 17B travel trailer mentioned in question-652325...

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

The main unit for the brake controller mounts in an out of sight location so only the control knob is visible. The knob controls the braking power and also acts as the manual override. | Tow vehicle 2016 Kia...

This is a very simple to use proportional brake controller and it only has a small dash mounted control knob so you will not have a large controller on your dash. | I have recently moved up to a 7x14 TA cargo trailer from...

This will allow you to connect to the factory wiring and give you a low profile controller. The control knob can be mounted on the dash where it is easy to access, while the main control unit is secured behind the dash. |...

The main unit is hidden so only the control knob is visible which also gives it an OEM look. | Hello, I have a 2023 sienna with the factory tow package. I would like to upgrade my trailer but am concerned about tongue weight....

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

The fact that you can install the control knob virtually anywhere is a huge attraction to people who need a brake controller. | I am probably going to buy a camper. I was looking at adding a hitch to my 2014 Nissan Frontier....

The main unit mounts behind the dash with only a small hole required for the control knob. You will need the Universal Wiring # RED69FR to wire into your Wrangler. | Looking at a 2017 wrangler unlimited. Recommend a hitch...

The main unit hides behind the dash while a small control knob is all you see on the dash. This controller uses the Plug-and-Play Wiring Harness # RED67FR to connect to the factory wiring on your Jeep. | Will the 3.2L V6 Jeep...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |

The Liberty brake controller is great because it doesn't have a bulky unit inside your Acadia's cab, it's just a knob which means it won't be taking up a bunch of space and you aren't going to be bumping your knee on it. |...