Result: knobs

Do you turn the knob in or out to get more braking power ? | Do you turn the knob in or out to get more braking power ? | The braking force level on the Hayes Air Utility Brake Control # 1300-80 is adjusted by rotating the black...

HA100400B I did not receive any operations instructions. Does turning the knob adjust brake action? | HA100400B I did not receive any operations instructions. Does turning the knob adjust brake action? | The Brake Controller...

I read the instructions on the pdf it says to turn the knob to adjust the brake but my knob doesn’t turn at all it moves a little but that’s it I don’t want to twist the crap out of it cause might break it |...

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. | What brake controller and wiring harness do I need to add electric trailer brakes to...

This is a low profile option where the main unit mounts out of sight so only the control knob is visible. The knob controls the brake power and also acts as the manual override. | Looking for an appropriate...

I turned the knob approximately 1/2 turn CW, and the lights went out. | Why would this make the brake lights on a 2019 Freightliner M2 106 be constantly illuminated? It was wired correctly and plumbed correctly from upfitter...

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

Yes, the Hayes Air Actuated Trailer Brake Controller # HA100400C can be manually operated. The knob can be pushed to side to manually activate the trailer brakes. | Can the HA100400C truck air brake to electric brake controller...

The main unit mounts out of sight so it isn't taking up space and you only have the control knob visible in the dash. The knob acts as the manual override and uses a colored LED for diagnostics. | What brake...

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

You can adjust brake rate by adjusting the control knob on the controller and manually activate the brakes from the slide bar. | I don’t see any wires above brake | The Hayes Air Actuated Trailer Brake Controller # HA100400C...

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

First I just want to verify if you have tried turning the controller handle on the Hayes Air Actuated Trailer Brake Controller # HA100400C. By turning the knob clockwise it will decrease the application of the trailer brakes....

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

Turning the adjustment knob doesnt change much if anything. | Im pulling a 25 foot tandem dual trailer with a 97 Freightliner. Ive had this controller installed for a while and just spent $4500 on parts and labor to convert...

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

Aside from the paranormal, there wouldn't be a way for the manual override knob of the Hayes Air Actuated Trailer Brake Controller # HA100400C to move on its own. | I have a 2022 Jayco with an S2RV Chassis. The Hayes controller...

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |