Result: knobs

I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. | I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. Can you help? | Hello Kenneth. I...

I also need a control knob for opening and closing the vent. And, a spare tire and rim, a Loadstar K550, ST205/75, D15. | I have a 2010 Royal Cargo trailer and I need a replacement vent top. Metal, if available, but plastic...

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. It is a 5/8 inch coarse threaded bolt. | What is the thread size of this hand wheel....

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. it is a 5/8 inch coarse threaded bolt. If this will not work, let me know the brand coupler you have, the capacity, and the ball size it is for and I can determine if we have something that will work. |

The main unit is hidden so the only thing you see is the control knob in the dash. The knob acts as the override and controls the brake power. | Hello, I am looking for recommendations on a brake controller...

The Redarc is great as it only uses a small visible knob rather than a large box that sticks out on your dash. | I need some advice on how configure/ set up my 2021 Jeep gladiator sport with 3.6 v6 and max tow package, 4.10...

What about the spring that I assume activates the in-gear/out knob. Any issues there, or with the in-out pull handle mechanism? | Before purchasing one of these am looking for weaknesses/plusses. On the Fulton 2-spd, is the...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

To stop you would need to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. I have attached the mounting hole pattern for this winch as well. | I see very little choice in...

You can use the Mounting Panel # 331-TPSI-002 to place the control knob in an open slot on your dash for a factory appearance. | Similar to planning on towing a 2022/23 Coleman 17B travel trailer mentioned in question-652325...

If you want to try to have some control unloading/loading, you will have to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. The winch does come with a 2 inch by 20 foot strap with a 2,000 pound capacity. |

The main unit for the brake controller mounts in an out of sight location so only the control knob is visible. The knob controls the braking power and also acts as the manual override. | Tow vehicle 2016 Kia...

This is a very simple to use proportional brake controller and it only has a small dash mounted control knob so you will not have a large controller on your dash. | I have recently moved up to a 7x14 TA cargo trailer from...

This will allow you to connect to the factory wiring and give you a low profile controller. The control knob can be mounted on the dash where it is easy to access, while the main control unit is secured behind the dash. |...

The main unit is hidden so only the control knob is visible which also gives it an OEM look. | Hello, I have a 2023 sienna with the factory tow package. I would like to upgrade my trailer but am concerned about tongue weight....

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

The fact that you can install the control knob virtually anywhere is a huge attraction to people who need a brake controller. | I am probably going to buy a camper. I was looking at adding a hitch to my 2014 Nissan Frontier....

The main unit mounts behind the dash with only a small hole required for the control knob. You will need the Universal Wiring # RED69FR to wire into your Wrangler. | Looking at a 2017 wrangler unlimited. Recommend a hitch...

The main unit hides behind the dash while a small control knob is all you see on the dash. This controller uses the Plug-and-Play Wiring Harness # RED67FR to connect to the factory wiring on your Jeep. | Will the 3.2L V6 Jeep...

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

The Liberty brake controller is great because it doesn't have a bulky unit inside your Acadia's cab, it's just a knob which means it won't be taking up a bunch of space and you aren't going to be bumping your knee on it. |...

The controller is operated by either the dash mount control knob but it will also allow you to control the brakes and make adjustments from your smartphone. | What trailer hitch do you feel is best for towing a Coleman Lantern...

Lastly, do not forget you will need a brake controller installed in your tow vehicle to operate the electric brakes, such as the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. If you could please provide the year, make, and model of your tow vehicle, I would be happy to see if we have a vehicle-specific pigtail available to make the installation much easier. |