Result: knobs

I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. | I need a replacement ratchet plunger knob for a Fulton F2 3200 lbs model FW32000101 boat winch. Can you help? | Hello Kenneth. I...

Then reinstall the knob and secure the cover. He said you will want to do this on both sides of the bed. | front corner wants to raise up in wind . is there an extra clamp you can put on that corner? 2018 Chevy Colorado |...

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

I also need a control knob for opening and closing the vent. And, a spare tire and rim, a Loadstar K550, ST205/75, D15. | I have a 2010 Royal Cargo trailer and I need a replacement vent top. Metal, if available, but plastic...

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. It is a 5/8 inch coarse threaded bolt. | What is the thread size of this hand wheel....

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Custom Wiring Adapter # 3020-S will give you what you want - a brake controller that is completely out of your way so there is no bulky unit underneath your dash. The Tow-Pro's knob will allow you to install the knob anywhere you like which makes the unit extremely convenient. |

If the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it or it is some how binding up to the shaft of the threads. |

I went out to the warehouse and pulled Repair Kit for Fulton Channel Tongue Coupler # F520801 to measure the bolt used to thread the knob on. it is a 5/8 inch coarse threaded bolt. If this will not work, let me know the brand coupler you have, the capacity, and the ball size it is for and I can determine if we have something that will work. |

Hey Thomas, the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it, or it is somehow binding up to the shaft of the threads. |

This also installs really easily with the included brake controller harness but it only puts a small knob on your dash as well. | 2008 Nissan Frontier.. I installed an Etrailer hitch and 4 wire wiring harness several years ago....

When it is time to remove this tonneau cover all you have to do is the following: fold the tonneau cover, slide the clamps toward the center of the truck bed, and undo the torque knobs at the bulkhead of the truck bed. It weighs just 35 lbs, so it is not particularly heavy. |

What about the spring that I assume activates the in-gear/out knob. Any issues there, or with the in-out pull handle mechanism? | Before purchasing one of these am looking for weaknesses/plusses. On the Fulton 2-spd, is the...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

To stop you would need to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. I have attached the mounting hole pattern for this winch as well. | I see very little choice in...

If you want to try to have some control unloading/loading, you will have to stop turning the handle, hold it there, and then manually turn the pawl knob to the opposite setting. The winch does come with a 2 inch by 20 foot strap with a 2,000 pound capacity. |

At the top of the page the photos show a plastic latch and knob adjustor for the tenion , and at the bottom pictures it shows a metal latch with an automatic spring adjustor ? | Good morning, I am going to buy a tonnaeu cover...

Lastly, do not forget you will need a brake controller installed in your tow vehicle to operate the electric brakes, such as the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. If you could please provide the year, make, and model of your tow vehicle, I would be happy to see if we have a vehicle-specific pigtail available to make the installation much easier. |