Result: knobs

Will the 3794DAT fit this hitch considering the little half-round wall thing in front of the twist knob? | Attached is a photo of the hitch on the trailer Im going to rent. It will be parked at a friends house for the weekend...

All other hardware (bolts, nuts, knobs, etc.) would have to be either purchased through Brophy or if it's not too damaged you can take it your local hardware store to find replacements for much cheaper than going through a manufacturer and paying for shipping. |

Also, you can position this bracket a couple of different ways so you can have the knobs pointed in different directions depending on how the bracket is oriented. | I have a 2016 Jeep Wrangler with a Mopar Trailer hitch? Will...

You cannot put a shank adapter like the # 853-7489 on the # TH23JV because of the locking knob system that keeps the shank firmly in place in the shank when installed. | Does this work to adapt a 1.25 T2 Pro XTR? Item TH83JV...

The main unit is hidden so the only thing you see is the control knob in the dash. The knob acts as the override and controls the brake power. | Hello, I am looking for recommendations on a brake controller...

If your rack uses a standard hitch pin or a threaded hitch pin this should work well for you, but if it uses a different style of attachment like a tightening knob that pins the rack into the hitch this probably wouldn't work well. |

The knob controls the braking power and also acts as a manual override. | I have a stock 2016 144wb Sprinter 2500, 4wd, standard roof. I need to tow a car hauler trailer with a GVW of 4,800 lbs. electric brakes. The Sprinter...

The Apex XT has a SnugTite so you can install and remove the rack simply by turning the knob, and at 35 lbs is 8 lbs lighter than the Curt # C18065. | Is this hitch rack quick and easy to install and remove? It would not stay...

You can use the Mounting Panel # 331-TPSI-002 to place the control knob in an open slot on your dash for a factory appearance. | Similar to planning on towing a 2022/23 Coleman 17B travel trailer mentioned in question-652325...

When the bike rack is fully ed into the Draw-Tite receiver on my 2016 Subaru Outback the knob to release the swing arm hits the bumper. The Draw-Tite has two holes. | When the bike rack is fully ed into the Draw-Tite receiver...

The main unit for the brake controller mounts in an out of sight location so only the control knob is visible. The knob controls the braking power and also acts as the manual override. | Tow vehicle 2016 Kia...

This is a very simple to use proportional brake controller and it only has a small dash mounted control knob so you will not have a large controller on your dash. | I have recently moved up to a 7x14 TA cargo trailer from...

This will allow you to connect to the factory wiring and give you a low profile controller. The control knob can be mounted on the dash where it is easy to access, while the main control unit is secured behind the dash. |...

The main unit is hidden so only the control knob is visible which also gives it an OEM look. | Hello, I have a 2023 sienna with the factory tow package. I would like to upgrade my trailer but am concerned about tongue weight....

This unit can produce 144 gallons of hot water an hour and has a thermostat that will allow you to change the temperature by the degree instead of just a knob with an arrow saying hotter or colder on it. | Hi, I am looking...

The main unit for this controller hides behind the dash with only a small control knob on the dash to adjust the brake force. For you 1997 Coleman Fleetwood Taos you will need 2 Hub/Drums # AKHD-545-2-1K. | I just bought a...

This rack allows for tool free installation, if you turn the knob you tighten the rack in the hitch receiver and eliminate any movement between the rack and your hitch receiver. | I have a 2018 Jeep Wrangler and just had a...

The NV 2.0 can be tilted down - even with the bikes loaded - with the press of a handy foot lever; it does not require any tools to install into your hitch as you'll only need to turn a knob to tighten the shank in the hitch and this also works as an anti-rattle device for a quiet ride. |

We used to carry the Yakima SwingDaddy that you mentioned and it had a distance of 6 inches from it's pin hole to the back of the knob for the swing mechanism. So you'd most likely have some contact there. | Weve got a hitch...

The integrated locking knobs on the shank will do a great job of securing itself to the reducer sleeve, but because the sleeve only has one set of hitch pin holes, there will be no way to actually secure the sleeve to the hitch receiver. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

If you are thinking about going that route, I highly recommend taking a look at the Kuat Beta # B202-114 which weighs less than 13 lbs and has dual-strap cradles along with an anti-rattle hand knob. When using a hanging rack it's possible you'll need a bike frame adapter bar, # 64005, if your bike is dual-suspension, has a step-through frame or you want to carry a small children's bike. |

It also has a unique installation method where the main portion of the brake controller is installed behind your dash and the only visible portion is the control knob. You will also need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete your installation. |

For a brake controller I really like recommending the Redarc Tow-Pro Elite # RED44FR for a few reasons; you can install it virtually anywhere since you only need access to the 3/4" diameter control knob, it uses color coding to communicate the different settings so you don't have to try to read anything, and then it features 2 different modes (proportional and user-control) so that you get the most control over your trailer braking action whether you are towing on the highway or overlanding (which is becoming increasingly popular among Jeep Wrangler owners). |