Result: level

It sure is Steve and welcome back! The etrailer Sidewind Trailer Jack w/ Drill Adapter item #e88GV is the correct jack if you don't want the SnapPad. This one is designed to fit the standard bolt pattern of an A-Frame trailer coupler and can be…

The correct replacement transfer switch for your PD52 transfer switch in your 2019 Jayco North Point, is the: - Progressive Dynamics Transfer Switch - Metal Case #PD52. This transfer switch can automatically reroute your RV's AC input from shore…

Typically trailer tires should be replaced every 3-6 years depending on wear. Heat and UV rays are the biggest causes of deterioration for tires but even storing the trailer inside can still lead to dry rot or flat spotting. The sidewalls of trailer…

Hey John, congrats on the new camper. For a sewer adapter that'll attach to your Quick Drain Sewer Hose item #D04-0120PB, I recommend the EZ Coupler 4-in-1 Adapter item #F02-3103. The EZ Coupler item #F02-3103 is going to insert directly into…

The collapsed height of the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is 28-5/8" from the base of the wheel to the top of the jack tube. The tallest measurement of the jack when fully extended is 31-15/16" from the center…

I spoke with my contact at DeeZee, who did not have any information as to whether or not the box would fit in front of the wheel well, rather than in its typical installation behind it. However, the foot or bottom of the box is 17 inches in length.…

Hey Steve! The area you have to trim to install the Curt #C69RJ isn't too big or complicated so it should be pretty simple. See the attached photo. It comes with a diagram to help guide you and I would use a Dremel to make the cut. If you…

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

I was able to go out to our warehouse and compare the RhinoFLEX RV Sewer Hose #CAM39761 that you have with the Valterra RV Sewer Hose Carrier #A04-5094BK that you referenced and found that they are compatible with each other. The hose carrier has an…

The two orange fittings at the ends of the RhinoFLEX RV Sewer Hose, part #CAM39761, are designed to come of easily. The ends can be removed by twisting the black locking rings until loose. From there, you can unscrew the orange fittings. This makes…

I spoke with my contact at Lippert and he confirmed that the Lippert Components Power Tongue Jack 1817941 #LC285318 can be rotated to be best orientated for you. The jack can be un-bolted, rotated, and reinstalled.

Thanks so much for the pictures and I'm sorry to hear about your accident! I hope everyone is okay. The correct replacement hose for your regulator is the MB Sturgis #100473-12. This hose measures 12" long but various longer units are…