Result:

In regards to the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, the float side is on the right part # LC26VR and the fixed is on the left part # LC84FR. |

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs part # LC84FR are cut to fit per Lippert....

Im wondering if the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Float Side Item # LC26VR would fit my RV. |

No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR includes the slide racks and the following pieces of hardware: 2 Rack-end pugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs I've attahced a photo of the hardware and a review video of the whole kit for you to check out. |

The rails that come with the Lippert Replacement Dual Rack Standard Repair Kit for RV In-Wall Slide-Out Item # LC84FR are both 42-3/4" long....

Is fixed towards the front of slide or tongue of trailer and float towards the bumper of trailer if slide is on left side / drivers side? | The Fixed Dual Rack Repair Kit # LC84FR goes on the left side of the slide as you look at the slide...

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, # LC26VR that you linked to will need to be cut down on the un-notched end to the length needed for your application. |

Hey Brett, The shoes for the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR aren't sold separately so the most cost effective way to get them would be their repair kit # LC83BX. |

Hey Mike, yes you are going to need to cut the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC84FR to fit your specific 35" application. |

| Hey Jack, yes the Repair Kit for Schwintek In-Wall RV Slide-Out Systems # LC83BX is an OEM part as Lippert is the company that makes/owns Scwintek and that who we get the # LC83BX from. |

If you have Lippert in-wall slide-outs, then we have the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR for the float side. |

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, # LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. |

As long as your original spur gears show no signs of damage (i.e. teeth missing or worn) you'll be good to use them with the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side Item # LC84FR. |

how do you cut these down to size? | Hi Keith; you can use a hacksaw or any power tool designed for cutting metal to cut the # LC84FR down to size. |

Hey JFG, it sounds like you are in need of the Replacement Standard Dual Rack Repair Kit part # LC26VR which replaces the outer rail that has the gear kit rides on. |

| The correct slide-topper you'll need for a 151" long slide-out is the Solera RV Slide-Out Awning part # LCV000165061 for black or part # LCV000163299 for white. |

I've attached a video where Shane will walk you through the steps of installing roof membrane that you can use as a guide for repairing your slide-out roof. | I have a coachman hybrid travel...

As for a follow leg kit, you will want to use the Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060. | Can you give me the correct parts for this...

Once the bolt is removed the landing gears should be able to be slide out towards the vehicle. I have attached a list of repair parts for you below as well. | How do we get...

Hey Larry, thanks for reaching out. Depending on the severity of the damage, the Alpha Systems Alphabond Repair Tape for RV Roofs # AL32KV may be enough to seal the crack and stop the leak....

Thetford uses part #33239 as the replacement flange seal across a number of their RV toilets, including the Aqua-Magic Style II, and that's the seal included in the repair kit. ...

Im looking for a repair part number 14712 for a Demco auto slide 18K pound hitch. | Im looking for a repair part number 14712 for a Demco auto slide 18K pound hitch. The part is on model 6077...

It sounds like you need a leg repair kit, or possibly two if both sides are damaged or worn. | I have a shaft piece that is worn/hollowed out that connects the horizontal bar that goes to the other leg and...

I purchased one of your roof kits. When I pulled up the old roofing, I found a fair amount of damage to the osb and wound up replacing it as well as some of the 1x2 rim that is around of the trusses. In the process of of doing that I had to...