Result: square spindle

I have a square axle on a boat trailer and need to replace a spindle, can the spindle be cut to fit in the square tube due the the angle? | New spindles should be welded on only by a professional welder who has experience and the correct jigs...

I need spindles for a boat trailer one and a half square | Dave, the only two square spindles we have are the Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR and the Square BT8 Spindle for 2,000-lb Trailer Axles # TRU97FR. To figure...

I have seen a similar axle spindle fit a 2x2inch square axle tube. Is the stub diameter indeed 1.75? This would fit into a square tube with .125inch wall thickness, but I dont think this would be strong enough. Thank you! | For your 2 inch by...

Current spindles are 1inch diameter mounted into a 1.25 inch square axle. Is item TRU97FR—1inch spindle to 1.50inch square—your closest match and what I need for spindle replacement? Can a welder fill that quarter-inch void easily and safely...

#TRU47FR Spindle 1.5inch SQ and T4084600042 Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast - #T4084600042 Do these hubs an spindles work together? Is there another spindle like thes that is ez Lund but still square? | The spindle...

I need this spindle without the plat welded to it. Do you have just the spindle shaft. My axle is 2inch square and it needs to fit inside the tube. The diameter is 1 3/4inch | TruRyde EZ Lube Spindle # TRU74FR does include a brake mounting flange...

Is it possible to add a backing plate for brakes to this spindle? I am building a trailer and would prefer the square stub over a round but I do not see a square stub option that has the backing plate. The lug pattern will be 5 on 5. | Adding...

I have a boat that I bought used and trailered sparingly, but one day I noticed a wheel looked tilted. I soon learned that the bearings were gone and the spindle was damaged severely and bent. It was welded into a square axle although the spindle...

Hi, I have a triple axle trailer with 1.5 in spindle diameter with a 2x2 square tube between spindles, is there any way to verify what weight rating the axles are? Thank you | The 2x2 inch square axle is likely 3,500 lbs or less capacity....

1 -1/2 square spindle TRU47FR bearing outer 1.38 - 1.06 in bearing | The correct bearings to go with square spindle # TRU47FR are inner bearing # L68149 and outer bearing # L44649. The matching races are # L68111 and # L44610, respectively....

I need square spindles 1.5inch square that are 1 1/16inch x 1 3/8, do you have this size?? Please let me know! Your TRU47FR look close ... | The range of trailer spindles we offer is shown on the linked page. These include both round and square...

I have a boat trailer with bearings L44643. 4 lug 60 inch axle. There is substantial marring on the spindle. It's a square axle. What do I use for replacement? | Since you have a pair of # L44643 bearings and a square axle, the right replacement...

I need spindles for boat trailer. 2k lb. Will work. bT8 style with 1.5” square shaft. The tru97fr is perfect but I want the EZ lube style. ??? Can’t find it. ??? | Hey Steve. The Square BT8 Spindle for 2,000-lb Trailer Axles item # TRU97FR...

What dimensions of square stock would be appropriate for this spindle part # TRU97FR for a 2000 lb trailer? | The bar stock you use should be at least the size of the square part of spindle # TRU97FR which is 1-1/2 inches. Square axles...

Do you have a square spindle that will fit a 2 inch square axle. I have to fabricate a dated 45 inch pontoon trailer axle and looking for a kit with hubs and bearings also. | We have two possible options for your 2" square axle depending on...

Your dimensional drawing for spindle Item# TRU47FR shows the square section of the part to be 1.5. However, the smaller diameter of the adjacent mating surface for the grease seal is 1.73. So, Im assuming that the square portion of the axle...

I have dual square axles with a rusted out spindle and I can’t find a replacement online. Trailer was built in 1998 and that company doesn’t sell parts. The problem is the axle has a slight offset for the spindle to the square tubing. The axles...

Hi these are the rims I want to use a grill build. I want to use square tubing for my axles but I have no experience in this area. I want to pull it around just like a wagon. Please help me with the parts I need to do this. Heres the rim specs... PRODUCT...

Trying to source for Trailer Axle square, 76 inches long, 3,500 lbs, Tapered Spindle, 1 3/8 x 1 1/16 | It sounds like you have a traditional spindle size for a 3500 lb axle. For your bearing kit, I recommend the Bearing Kit for number 84 Spindle,...

Will this hub fit onTruRyde spindle TRU47FR | The Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K is what you'll want to use with the Square #84 Spindle part # TRU47FR. |

I have a 94 trailrite trailer for my boat. Rating is 3750 lbs. I smoked the surge brakes last weekend and one of the spindles was damaged. I am having a heck of a time finding a weld on spindle for replacement. Rectangular axle. I beleive it...

I have a 1 1/2 3/ 16 gauge square tube for a axel and the inside to inside measures 1 1/4 . What size spindle could I use to work with this for a 2,000 lbs capacity? | The spindle that you referenced, part # TRU47FR, will work great for you....

Hi I have a boat trailer with a 1.5 inch square axle with a 1 inch spindle do you sell types of axles? I only can find 1.5 inch square axle with a 1 1/16 inch spindle. If I bought the axle with the 1 1/16 spindle my 1 inch hubs wouldnt fit on...

Looking for some extra detail, specific to Torque Rating if you have it. Cheers! | If you're referring to the spindle nut on the Square BT8 Spindle for 2,000-lb Trailer Axles part # TRU97FR. there is no torque spec. There is no torque spec for...