Replacement Recommendation for Square 2K Axles on a 1998 Trailer
Updated 01/02/2024 | Published 01/01/2024 >
Question:
I have dual square axles with a rusted out spindle and I can’t find a replacement online. Trailer was built in 1998 and that company doesn’t sell parts. The problem is the axle has a slight offset for the spindle to the square tubing. The axles I see on your store show a straight pipe with spindle welded inside the tubing for a straight line, My spindle is welded to a square backing plate with four holes for the add on brakes. That square piece lowers the spindle halfway below the square axle. It measures as a 1” drip. I see many 2” axels. Does this mean I need to change both axles to match? Do they still make 1” axles? Can’t find them online. Axles are 2” square. 96” wide. Rated for 2000 lbs. 5 bolt on 4.5” hubs.
asked by: Cruzzr
Expert Reply:
You have an older set of axles that don't exist anymore and while I do have a few solutions for you, but they are a different style. If you want to stick with what you have then you'll need to talk with a trailer shop about ordering something custom, otherwise you can go with our Timbren Axle-Less kit:
- Timbren Axle-Less Trailer Suspension - Standard Duty # ASR2000S02
This kit bolts onto the trailer frame and has rubber suspension pieces so you won't be reusing the leaf springs you currently have. Since your trailer is a tandem axle you'll have to replace both axles with this style so everything works correctly.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized
- Q&A: Can I Fix Wallowed Out Wheel Stud Hole on Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Is There a 3,500 Lb Idler Hub with Hub Bore Less Than 64MM
- Q&A: Recommended Wood for Bunk Boards on Boat Trailer
- Q&A: What Size Hole to Mount Optronics 6-1/2 Inch Oval Taillight # STL22CCRB
- Q&A: Sea Doo Trailer Replacement Hubs
- Q&A: Replacement Axle Options For AL-KO 4,400LB Axles w/ 85" Hub Face, 6 on 5-1/2" Bolt Pattern w/ Brakes
- Q&A: Can Timbren Axle Less Kit be Used on Tandem Axle Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Where to Position the Trailer Axle?
- Article: How to Measure a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How Long will the Axles Last on my Boat Trailer?



