What Size Square Stock Should be Used with BT8 Spindle to Make an Axle
Updated 03/21/2016 | Published 03/18/2016 >
Question:
What dimensions of square stock would be appropriate for this spindle part # TRU97FR for a 2000 lb trailer?
asked by: Bill D
0
Expert Reply:
The bar stock you use should be at least the size of the square part of spindle # TRU97FR which is 1-1/2 inches.
Square axles are normally found in 1-1/2 inch and 2 inch sizes and there are suspension u-bolt kits for these sizes so I would not recommend using a different size because it might become difficult to source parts.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L44643
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: l44643
- Search Results: trailer spindles
- Search Results: bt16
- Search Results: l44610
- Search Results: trailer axle
- Search Results: bt8
- Search Results: trailer tires and wheels
- Shop: Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Replacement Trailer Wheel Bearing - L44643 - Qty 1
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement Square 1.5" Spindle for a Boat Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Suspension Enhancement
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Brake Controller
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

