Search: side marker lights > RV Camera System > Drive x >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.
view full answer...You can select your new hubs by matching up your axle weight rating, wheel bolt pattern and the bearings used in your current hubs. Based on my research your hubs are 10 x 2-1/4-inches, are from a 3500-lb axle and have the 5-on-4-1/2 bolt pattern. If…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…
view full answer...A certain amount of noise is normal with the Super Springs suspension stabilizers, especially on rough or uneven pavement. According to Super Springs, the bracket that attaches the Super Springs stabilizer to your truck's leaf springs has two…
view full answer...Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…
view full answer...You're certainly not the first person to ask about the Atwood 85739 master cylinder but those replacement parts are simply no longer available which means your best option truly is to replace your actuator. I completely understand this isn't…
view full answer...Post style guide ons like the part #CE27640 are designed to be visual aids and are not designed to be used as physical guides. For a pontoon application you would be better served with the CE Smith Roller Style Guide-Ons #CE27672 which can be used…
view full answer...Thanks for the photos, nice boat! I think with a boat of that size, you would be better off getting the large post-style guides as the smaller ones may not be sufficient and would be harder to see. I would go with the CE Smith Post-Style Guide-Ons…
view full answer...I do have options for you to use guide-ons like the CE Smith Post-Style Guide-Ons part #CE27640 on your boat trailer but as I am sure you can see, the step platforms are going to interfere with the u-bolts which wrap around the frame and are used to…
view full answer...The CIPA Custom Towing Mirrors #CM11550 are speciically designed to help you see behind your trailer. While they do not necessarily expose anything, they do give you a 4" extended mirror face which allows you to to expand your line of sight…
view full answer...Hello Mark, Per the tech at Lippert you are going to want to use AW-32 Hydraulic Fluid, and not an automatic transmission fluid.
view full answer...I found some photos of the Heng's Roof Vent 122112 online. Based on this, it looks the correct replacement for you should be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part #BV0554-01 for white or part #BV0554-03 for…
view full answer...Filters
- 1 results
Vehicle Fit
Filters
