Result:

Yes, you can splice the Rear View Safety Cigarette Lighter Adapter # RVS-505 into the power and ground wires of the Rear View Safety SimpleSight Wireless Backup Camera System # RVS-355W to basically create a plug and play connector, instead of splicing directly into your vehicle's wires, which is more permanent. |

To start, Forest River is typically wired for Furrion camera systems, so backup camera systems like the Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF would be the way to go. |

Your best bet is going to be the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit # RVS-770613-213. | Do you offer any trailer back up camera systems...

Yes, you just need the Furrion Vision S Wireless RV Backup Camera w/ Night Vision # FCN48TASF. This replacement camera comes with the mount and a splice in wire harness that you can use to tap into a rear running light on your truck bed camper to power the camera. |

| The Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614 simply needs a 12V power at the cameras and monitors. | 2017...

I was told to look at the Furrion system, but I mostly see people using that on RVs. | Im looking for a recommendation for an enclosed trailer camera. I dont have a truck or trailer that is pre wired for anything....

There are LED amber clearance lights that are very similar if not an exact match to the clearance lights of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR. |

That covers the LED and the batteries which leaves us with a rear camera such as the Rear View Safety Backup Camera System # RVS-770613-213....

It also works if I connect directly to my rv batteries. meter shows 11.4 volts. I removed my rear top middle marker light and connect the camera there. | My brand new Furrion vision s 4.3...

We don't offer Echomaster camera systems, so I can't tell you which wire is which, but you'll likely connect one wire to the 7 way and one to a ground on the frame. | I have a 2005 F350 dumptruck. Id like to...

I would like to have backup lights option because I will be adding a wirelessinch rear view camera for the truck and would need something different for wiring on the trailer to be able to accommodate an extra wire for back-up lights on the boat trailer, which also is preferable for adding a second rear camera on the boat trailer and while the transmission signal is wireless it still needs power preferably from backup lights to add the 2nd camera that would come on when you shift into reverse when boat trailer is connected. |

Hey Jim, The Hopkins Backup Sensor System # HM60100VA needs to be ran to the reverse light circuit so you'd have to run the wire through the rear hatch to the grommet at the hinge and then run it over to either the driver or passenger side tail light. |

In order to provide a compatible 4-Way at the rear of your 2008 National RV with European taillight system for use with an American trailer, you will need to hardwire the 4 Pole Harness and Hardwire Kit, # C59496. |

Does this set of jacks come with a wiring harness to connect to the battery and what size gauge wire is required to connect the motors to the Rvs 12 volt supply system? Thanks for your help. | I would like...

Hello I have a question on my 05 copper canyon sprinter.I bought this trailer used a few weeks back.In order to get 6 inches between tailgate and rv the nose of the camper is way up in the air.my springs dont seem shot on trailer.But ive noticed the rear trailer tires are rubbing on floor of rv. i believe it was supposed to have 205/75r15 tires from factory and it has 225 on it .If i go back to 205/75 it will help the rubbing situation but make the rv even lower. also my axle is already under the springs.do they make blocks and longer ubolts like for the rear of a truck or a taller center equalizer.I am at a loss as to what to do. |

How do I install the Primus IQ Brake Controller on my 2008 Ford E450 Superduty RV 29C with a Master Tow Dolly 80THD. | There are three possibilities for your vehicle. If you have a factory 7-Way you will be able to use the Tekonsha PRIMUS IQ...

I was wondering if you sold a electric braking system to pull a 2 axle trailer. I know you sell the electric brake controller but I would need the wiring to go from inside the coach at the drivers seat to the rear of the coach which again is 38 feet long. |

To get the right system you would only need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle. |

With modern vehicles assistance systems, is it better to source the brake input for the brake controller to come from a rear brake lamp source, as in from the rear? | I am getting a 2022 Toyota...

The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7 includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. |

This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. To convert the 4-way connector at the rear of your Motorhome to a 7-way will require the # ETBC7. |

Be sure to avoid anything moving like steering or suspension components or anything hot like the exhaust system. | 2005 Chevrolet Express 2500 Cargo 4.8L I want to buy the Prodigy RF but my current vehicle does not have the...

I purchased the Jayco 6-way square to 4-way flat adapter, without realizing that Jayco referred to a type of RV and the wiring connection is not consistent with the 1997 Dutchmen. | Hi! I have a 1997 Dutchman pop up camper...

I have not purchased a brake controller yet please recommend one for my RV. Thanks | I have a 1998 40 Tiffin Allegro Bus diesel motor home. It does not have a pre-installed wiring harness so Im not sure how I can wire up a brake...