Result: RV Camera

I installed/wired the camera from the RV back bumper, underneath the RV, towards the front of the RV, ending in the compartment that hold my LP gas tank at the front of the RV. |

Even though your Jayco TT is pre-wired for a Furrion backup camera system, you could technically splice into the wiring and install something like the VueSMART Universal Mount # HM34FR. | My Jayco TT is prewired...

I have another option but there is currently not a pig tail harness that will plug into the Furrion pre-wired connector on your Flagstaff Trailer to install your new VueSMART RV and Trailer Backup Camera # HM34FR. Instead of using the included butt connectors, I recommend using two of the Quick Splices # SWC502905-1 which will allow you to connect the wiring behind the Furrion connector and will not require you to cut it off as the splice will slide over the wires with the connector still attached. |

| The VueSMART RV and Trailer Backup Camera part # HM34FR does require the running light circuit for activation. | With the LED lights on the back of my cargo trailer with the tailgate ramp how would you hook...

wanting to install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System Item # HM50002 my question is I only have the four pin trailer wire connector how would I go about installing this system so the reverse lights would activate the camera on my truck only having a four pin connector . will I need to get any harness adaptor ? |

I have included a link to a video review of this camera system for you. | Im thinking of buying 2 of the HM50002 for my 03 ford focus, one for the rear just for backing up dark tinted windows so I can see, and...

| A backup camera system like the Hopkins Smart Hitch # HM50002 does use a T-connector at your truck's existing 7-way trailer socket to connect to its 12V, ground and reverse circuit wiring that operate the camera. |

Why do I get an orange square on the screen while camera is working? | Why do I get an orange square on the screen while camera is working? | I called my contact at Peak Performance and they stated that the reason you are experiencing...

Depending on the camera system, you may only need the two wires, one for ground and one to connect to the reverse circuit. | I have a 01 chev silverado full trailer pkg 7 pin I bought a wireless backup camera...

I am interested in the Hopkins Smart Hitch Backup Camera, its monitor size and systems. I like a wired system as the Truck has Blue Tooth and everybody says that interferes with a wireless system. |

If you are referring to the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002, depending on your vehicle, you may be able to go through the firewall which you can drill in order to run the cable from the monitor back to the camera without going through your rubber floor. |

Regarding my newly purchased Hopkins HM50002. My 2005 Toyota Tundra has the 7 way connector adapter, but it does not have a factory hitch. plug comes apart in the back allowing its use. Would you have any step by step instructions on how I splice...

I am looking at the Hopkins 50002 Smart Hitch Camera System and i just looked at the videos. I was wondering if you have a video showing the install on a Toyota Tundra? | I am looking at the Hopkins 50002 Smart...

I would like to access the 12v power on my 7 way trailer wire harness so that I could power a backup camera at the back of a boat trailer. Do you have some kind of wire harness that I could use to do that? | I would like to...

I purchased a model 50002 backup camera system and will be installing it on my Tacoma 2003. | I purchased a model 50002 backup camera system and will be installing it on my Tacoma 2003. While I have a factory...

I reached out to my tech contact at Hopkins and the Hopkins Smart Hitch Backup Camera and Hitch Aligner System, # HM50002, absolutely can work for your vehicle. | I have a 2010 Toyota Tundra SR5 doublecab...

One of our most popular options for a back-up camera is the Swift Hitch Wireless Hitch Alignment Camera and Monitor, # 04928. | I want to run the lights inside my trailer but need my truck plugged in. Is there...

I just purchased the Hopkins smart hitch camera system. Can you give me an idea of where I can bring the wire into the cab. | I have a 2011 Toyota Tundra Crewmax 4 wheel drive. I just purchased the Hopkins...

In regards to your second question, no the brake-lite relay will not interfere or interconnect with the InvisiBrake or the custom wiring harness. The brake-lite system keeps your CR-V's brake signal from overriding the turn signal from your RV. |

Is there a “Y” flat adaptor available or something I can use to plug in both devices without splicing into the existing RV wiring? Thanks | I have a KarKaddy3 tow dolly to tow a car behind a motorhome, and Roadmaster 2120 magnetic...

I have attached the installation manual for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling 4-Point System # LC358590 below. It is the same instructions for the 6-Point # LC675817 kit. | I see...

Hello, I have a unique wiring problem that Im trying to work out for my towed RV. In addition to the two existing Stop/Turn/Tail lights, I want to add a third brake light to the rear of my towed RV. | Hello,...

The colors that you see on the 7-way connector are typical for RV style trailers rather than utility, cargo, or livestock style trailers. | I have an old cattle trailer that I am going to re-wire. It has apparently been re-wired...

etrailer Trailer Hitch Receiver # e45ZR Curt Powered Tail Light Converter # C59236 7-Way RV Upgrade Kit # ETBC7L Curt Echo Wireless Brake Controller # C51180 You will have 2 power wires running to your battery, I recommend using some Wire Loom # 7509-1 to clean up the wiring and protect it from damage. |