Result: solid step

Hello Jim, thanks for reaching out. A solid cost effective option for an observation camera is the Buyers Products RV Backup Camera System w/ Night Vision # 3378883000. |

You will need to un-pair the camera, the Furrion RV Observation System # FOS05TASF and pair again. | My camera shows to be paired to the monitor but there is no picture and it shows no signal....

To connect the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 to your trailer you need to connect the red wire of the camera to the positive (green) wire of the trailer. |

In order to fix the issue you are having the picture displaying upside down on the Furrion RV Observation Camera System part # FOS43TASF you will will need to follow the steps I have attached for you below: Step 1: Use the up arrow or down arrow buttons to highlight "Setup" menu, then press the power button to enter the next page. |

Another option is to hardwire the camera of your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF to the 12v system of your RV battery to boost the power running to it and thus the signal. |

A more reliable backup camera would be what I recommend over the Buyers Products RV Observation Camera System that you have. | I purchased a wireless camera from e trailer...

I have attached the pairing instructions for the Rear View Safety Wireless Hitch Camera part # Rvs-83112 below. Please note, you must first install a 9 volt battery not provided into the camera in order for the system to work properly. 1 )Turn on camera (see step 2 above) 2)Hold power button on camera for 6 seconds until Led flashes Blue. |

If you just want a rear observation camera, I'd go with the Brandmotion Wireless RV Observation System # BM37SR. | Hi etrailer, I'm looking at the Brandmotion camera systems for our new travel...

In order to un-pair the camera on your Furrion RV Observation System # FOS05TASF and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. |

If your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, # FOS43TASF, has an unclear image displayed, it may be from a weak signal. | Picture on monitor is fuzzy out of focus...

If you wanted to install the Rear View Safety Backup Camera System with Flush Mount Camera # RVS-7707721 to the rear logo on your truck's tailgate that would certainly be possible. |

| Since the SolidStep RV Steps fold up into the interior of the camper you'd need to use a hand rail that attaches to only the outside of the camper like the Stromberg # AM-533....

Does the Furrion S+ system have a good compatible antenna extender? The picture goes in and out for the cameras that are farther away. | Does the Furrion S+ system have a good compatible antenna extender?...

You apparently have a loose wire in your Furrion Vision S Wireless RV Backup Camera System, # FOS43TASF. Verify all connections are solid, including antennae and ensure it is oriented up, look for damaged or crimped wires. |

I wish Furrion had an extender so their system was compatible with longer trailers but for your application I recommend using a different camera setup like the Rear View Safety Backup Camera System - 4 Camera Setup # RVS-062710 along with the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133 so you are relying on a wired connection instead of wireless. |

To pair the Voyager WiSight 2.0 Wireless RV Backup Camera 7" Monitor # ASA27FR with your Voyager WiSight 2.0 Camera # ASA64YR or # ASA74YR you will need to follow the following steps. |

I followed the steps you recommended to another customer i have the same model camera system but it wont un-pair. | I followed the steps you recommended to another customer i have the same...

To get your Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 monitor to only display active cameras you'll just need to complete the follow steps: 1. |

Connect the black wire to a solid chassis ground. If your system includes side cameras, you can attach the yellow trigger wires to the turn-signal circuits for automatic switching. | How does...

| The Drive Wireless RV Backup Camera System # 324-000002 that you referenced can fit your 2019 238 RK Gulfstream Ameri Lite but you would need to cut off the connector you sent a picture in to wire it to the included connector that comes with this kit. |

I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part # ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the monitor is hooked up and in pairing mode. |

Sounds like you have a system like the Voyager RV Observation Camera System w/ Monitor and Mount # VOM43HDCL1B. | Just bought a used rv. Trying to use the existing voyager...

To go a step further the Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems part # FCE48TASL is also available which could also be paired to give you side view cameras while headed down the road. |

Clearly this strut will no longer function to control the entry door swing after the Lippert Solid step system is installed, so just wondering what etrailer and Lippert recommend to manage the door? |