Result:

The Rear View Safety Wireless Backup Camera System # RVS-4CAM comes with 1 camera, but can support up to 4 cameras. | I am...

The Rear View Safety Wireless Backup Camera - 130-Degree Viewing Angle, # RVS-DS1 is upgraded camera for the # RVS-2CAM system. |

This system only comes with one camera, so you will need to add the Rear View Safety 130-Degree Wireless Backup Camera # RVS-DS1 and two of the Rear View Safety Wireless Side Camera - 120-Degree Viewing Angle # RVS-775W to complete this system. |

The best option would be for you to use the Rear View Safety Wireless Backup Camera System # RVS-4CAM which is wireless and comes with 1 backup camera. |

For a 5th Wheel Tailgate like # VGD-10-4000, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera # RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor # RVS-772718 with this same camera. |

| The Rear View Safety Backup Camera System part # RVS-778718N has two input ports, AV1 and AV2. | I have installed an aftermarket rearview camera system...

| To add a door camera to your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 you'll just use another Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 # FCN48TASF and place it above your door. |

For your 5th Wheel Tailgate build, I recommend the Rear View Safety Backup Camera System with Flush Mount Camera # RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor # RVS-772718 with this same camera. |

| Disconnect power to camera and monitor components of your Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 for several minutes to completely power down, then reconnect and power up. |

As you can see, there are three other channels on the Furrion RV Observation Camera System and I highly recommend using these for additional cameras, the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for your trailer's blind spots and the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF for the vehicle or wherever else you want to put it. |

I recommend starting with the # VG-15-4000, and then using a small camera system like the Rear View Safety Backup Camera System with Flush Mount Camera # RVS-7707721 or the Rear View Safety Backup Camera System - Mirror with Monitor # RVS-772718 with this same camera. |

The Rear View Safety Universal Backup Camera System # RVS-770619N has a 7" monitor that clips on to your existing mirror. | Was needing a four camera system so I can pu one...

As you can see, there are three other channels on the Furrion RV Observation Camera System and I highly recommend using these for additional cameras, the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for your trailer's blind spots and the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF for the vehicle or wherever else you want to put it. |

I currently have the Vision 2 system installed and would like to replace it with a the S version, 7 inch screen and 4 cameras rear, door with dual power for use with RV battery for security, and side cameras . |

You will need to start off with the Rear View Safety Backup Camera System # RVS-062710 which gives you 2 rear cameras and 2 side view cameras. |

For example, you could use the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor, part # RVS-062710, which has the capability to be hooked up to four cameras. |

| For additional cameras to use with the Rear View Safety Backup Camera System # RVS-8129900Q you'd want to use the part # RVS-812N which you can use up to four of these. |

I have a question regarding Rear View Safety item RVS-77616-2133. I would like to install the three supplied cameras 2-side and 1 rear on my 5th wheel trailer....

| Yes, the Rear View Safety G-Series Backup Camera System part # RVS-776718-CT will switch back to the camera on the AV2 input if the vehicle is placed in reverse even if currently viewing the camera on the AV1 input. |

If the extension cable you are looking for is for the camera then the shortest option we have available is 9-1/2', the Rear View Safety Camera Extension Cable part # RVS-101N. |

There are not any additional cameras available for the Wireless Observation System # 324-000002; I strongly recommend instead going with the Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit # RVS-776614-213. |

The difference between those 2 Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kits is the Kit # RVS-770613-213 comes with 1 camera while the Kit # RVS-770614-213 comes with 2 cameras. |

This wireless backup camera system has 3 waterproof cameras with night vision, 1 rear camera and 2 side marker light cameras with motion detection. |

| The Rear View Safety 130-Degree Wireless Backup Camera # RVS-DS1 is designed to work with the Rear View Safety Wireless Backup Camera System # RVS-2CAM or # RVS-4CAM. |