How To Switch the Channel For The Rear Camera On the Furrion RV Observation Camera System

Updated 06/13/2019 | Published 06/12/2019

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

(736)

$453.94

LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2

(70)

$375.27

Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1

(67)

$208.31

Question:

my camera is mounted on the rear of my rv, the picture only displays when I touch door on the screen but I want it to work when I touch rear so it will show the distance lines

asked by: Don

Expert Reply:

The Furrion RV Observation Camera System part # FOS05TASF comes preset with the camera paired to the door cam channel. If you want to pair the camera to either rear cam channel then you would need to do the following:

1) Press the menu button on the monitor.
2) Select pairing via the menu settings.
3) Select either of the rear cam channels.
4) Press the button on the bottom of the camera.

Please note you will need to have someone at the rear of the trailer to press the button on the camera as the pairing process will time out after 6-7 seconds. As you can see, there are three other channels on the Furrion RV Observation Camera System and I highly recommend using these for additional cameras, the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for your trailer's blind spots and the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF for the vehicle or wherever else you want to put it.