Result: 30 amp plug

This brake controller calls for a 30 amp breaker for power but my plug has a 40 amp breaker will that do or do I have to change it to a 30 amp? | You should change your breaker to a 30 amp breaker when installing the Curt Echo Mobile # C51180....

Is there a quick connection plug/adapter available for this vehicle? If not is there a model that offers one which is still a portional brake controller? | With your Ford Ranger being so new there isn't a confirmed fit adapter however I do...

Which 2019 Ranger fuse feeds the always hot pin of the 7 pin trailer socket? | I looked up the online owners manual for a 2019 Ford Ranger. This shows the fuse for the trailer module is in spot 73 and it will be a 30 amp fuse. These newer...

will I be able to use this adapter on a ford ranger fx4 level 2, 2006 part no.3035-S | You will only find the brake controller ports on the full size trucks. You will have to hard-wire the brake controller in a Ranger. The brake controller will...

I have a 2014 Ford Escape Titanium that has a factory tow package with a 4-pin connector. I was considering a dual connector socket to accommodate both my 7-pin camper camper and my 4-pin utility trailer. It looks like the Hopkins HM40975...

Do I need to use the 30 amp circuit breaker to install the redarc liberty in my 2022 Ford Ranger xlt. Also when reviewing installation videos they show all 4 wires from under the dash connected with butt connectors to the harness that plugs...

Where would I put the 9510 to protect my system? I would be pulling an old restored 69foot Forester camper and using the new 7 pin system. Also I will need to put a fuse system and diistibution box in my camper. We need to be on the road in...

On my 2017 Ford Escape with the factory tow package and a 4 way flat plug where would the best place be to mount the HM40975 bracket? The factory bracket is welded on so I assume that the HM40975 bracket would be mounted to the left of it. That...

I’m installing a Curt echo wireless brake controller on my ford ranger. I do not have a 12 vol power wire currently connected to my 7 pain truck re eptacle. The trailer brakes on on a 10 gauge wire T terminating at the trailer 7 point plug. Question:...

Help! I bought the P3 Break Controller, and the 4 flat/7 pin plug with the long gray cable, the three circuit breakers, etc. I bought it before Xmas and then becam ill and couldnt install the product. Your videos seem to have changed and...

This has a 4 wire connector. My little trailer has a a six pole round connector I would like to use. Is this the right harness for me and what parts should I get for the car mounted socket? All so is it possible to easily provide house...

Do you guys have any idea if this would be a good upgrade in place of the older Magnetek 6620 power converter? | That ones a bit overpowered Chance! I recommend the WFCO Auto Detect RV Converter and AC/DC Distribution Panel item # WF96FR. This...

Hello I purchased your product the other day and I was curious where on a 2011 Ford Escape limited 3.0 the right frost plug is to replace with the heater and how to go about doing that | The Kat's block heater part # KH11409 that you referenced...

I am planning to purchase a seven plug conversion and brake controller. but I have this issue with the current factory 4 pin plug I have a 2004 ford ranger. I have power for running lights. but the turn signals and brake light wire connectors...

I am building a cellular car kit into a pelican case. My plan is to have several 12v devices in the case cigarette lighter outlet, usb charging ports, etc. I have an AC to DC adapter that will give me 12v 10amps inside the case, but I would...

Can you tell me the parts required and possibly where to connect the black wire/ 12vinch for a 2020 Ford Escape Titanium for towing a trailer with electric brakes with a 7-pin connector. I have another vehicle that I typically use to tow this...

I purchased a Curt Echo for my 2021 Ford ranger and when I set it up the app cant find the TBC. It looks like when its plugged into the 7 pin that it isnt getting power. I tried putting the truck in tow/haul mode thinking that might send power...

Hi, Just wondering whats the difference between the two and if one is better than the other before purchasing. Thanks. | The Curt # C56328 and Tow Ready # 118566 4-pole wiring harnesses that fit your 2013 Ford Escape are very similar powered-type...

Which models are compatible with a Ford vulcan 3.0l v6 found in the 2008 Ranger? Thank you! | For your 2008 Ford Ranger with a 3.0 liter V6 we have the Kat's block heater part # KH11409 which is a confirmed fit. It installs in the plug on...

Last year my wife bought a 2013 Ford Escape with the factory tow package. Their tow package only comes with a 4 pin flat connector, but I wanted to haul a lightweight fiberglass travel trailer with it, and need brakes. I took my time with...

Please help me, I need a brake controller and hopefully a wiring adapter for a 1998 Ford Ranger 4.0 liter engine, 4x4 Xlt ext cab truck, I am pulling a 17ft camper weighing 2750 dry weight. I am almost sure it has the towing package,...

If someone is willing to spend the time, I’m building a go anywhere my Jeep can go camper. How can I wire my trailer for running lights and 12v power to charge the camper battery for my water pump and lights. Should I wire it with a 4 pole plug...

1996 ford ranger xlt 4x4. can i just run the hot black wire from the plug to the hot side of battery with a fuse holder, instead of a 40 amp breaker. | You can use an in line fuse instead of a circuit breaker for the hot lead on a 7-Way. However,...

Why do I not have power on pin 1 have this paired with the curt wireless controller and no power on it either. Have even hooked trailer up put in drive still no power | You will want to check the fuse for your trailer charge circuit. As your...