Result: Boat Loading Guide

Thank you for providing the photo of your boat and trailer and the bow guide rollers you have just installed. | I have a 395vs ranger just bought the rollers on the front are they just for guides or can you...

I am considering installing these roller guides on my Paddle King pontoon boat trailer. The trailer is a lightweight build and carries my 13foot pontoon boat. | I am considering installing...

| The Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 1/2" Shaft # YR12243-4P is compatible with the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair # CE10211G. |

Normally, you will see keel rollers near the back of a boat trailer to help guide it on. But it is possible to place a roller else where on the trailer. | I have no keel roller on my 2004 Zieman boat trailer...

From the flat portion of the plate to the center of the bolt holes is going to be right at 3" on the One Piece Bracket for 12" Roller for Boat Trailers item # 408300. You'll also need the Roller Shaft 13" x 5/8" item # CE10727A and a Guide Roller like item # YR12243-5. |

It has two bunks only to load the boat, along with the front roller bumper stopper. | I have an 18 foot Alumacraft boat with a EZ Loader trailer. The trailer is a pain. It has two bunks only to load the boat,...

In order to convert your Malone trailer from a roof rack on wheels to a full on boat trailer with roller guide-on's, I recommend using the CE Smith Roller Bunks for Boat Trailers part # CE27700 and CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks part # CE10003G-4. |

2” wide 3” long galvanized u bolts Need them to secure guide on posts to boat trailer | Do u have any of these available for purchase? 2” wide 3” long galvanized u bolts Need them to secure guide on posts to...

While we definitely have what you need, I am guessing there was maybe a misprint in regards to the tongue weight, which can't be a max of 3,500 lbs (tongue weight is generally 10%-15% of the trailer's maximum loaded weight). So I am guessing that the trailer's overall max loaded weight is 3,500 lbs, which makes a lot of sense because you mentioned your boat was 1,600 lbs. |

I have a broken wheel stud on a load rite double axle boat trailer. The threads are 1/2-20, splines are 5/8 wide and 22 per inch, spline length is 5/8, the base length is 11/16, I dont have the thread length since this one is broken. |

I recommend using the Trailer Hub Wheel Stud item # 7-122 to replace the wheel studs on your Load Rite boat trailer. These are a 1/2" diameter and 2" long. | Im in need of replacement wheel lug studs. My existing...

I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. | I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. The four hole backing...

You will need to use that as a guide for how to attach the fenders with the brackets. | TRAILER FENDER MOUNTING HOLES AND BRACKET HOLES DONT MATCH UP. I ORDERED FENDERS FU008559 AND BRACKETS PF775-BKT-2 FOR THE LEFT AND RIGHT...

The best thing for you to do is to compare the dimensions and mounting dimensions to the ones on your Load Rite boat trailer initially. The distance between the mounting slots is 35 inches measured from the inside and 41-1/2 inches measured from the outside of the slot. |

Hello, I am looking at replacing the side guide rollers on my trailer. The current rollers are 12x 2-1/2inch w/ 1/2inch Shaft. I found the correct replacement roller on your site from Yates along with a top cap but I cannot find the right length...

Hi, Need to new U-bolts for my boat trailer. GVWR= 4,650 lbs. Max Load Carrying capacity= 3,500. | Hi, Need to new U-bolts for my boat trailer. GVWR= 4,650 lbs. Max Load Carrying capacity= 3,500. Tandem....

Will this help with my ‘05 F250 w/a 6” lift, that’s typically loaded with tools and pulling a 24’ boat w/ a large motor sway and sag are my main issues? | Will this help with my ‘05 F250 w/a 6” lift, that’s...

Do you carry a tire and galvanized blade style wheel combo for a 2012 Trailstar boat trailer? Tire size is ST 175/80 D13 load range C. | 1. Do you carry a tire and galvanized blade style wheel combo for a 2012...

The RAS gives up to 2000-lbs of load support so it will be ideal for your combination of camper weight and trailer tongue weight. | I have a 2018 Nissan Titan and I plan on purchasing this product but I need to know if it...

This trailer has smaller 8 inch wheels so it is low to the ground so you can get your boat on the bunks when loading up. Like the Malone trailer, the CE Smith comes with a winch so you don't have to make a separate purchase. |

For your 2019 Ford F-150 Raptor towing a 6000lb boat I recommend using the RoadActive Suspension Leaf Spring Enhancement Kit # RAS3611 you purchased as it will be the best at preventing sag like you are experiencing, but will also eliminate axle wrap and minimize sway and body roll giving you a better driving experience loaded or unloaded. |

I put a slide in pop up camper in the bed that weighs 1100lbs and tow a smaller boat with about 100lbs of tongue weight. The camper is fairly easy to load and unload so I keep it unloaded when not using. ...

Keep in mind that suspension upgrades improve ride and handling but do not increase load capacities. | In need a Heavy Duty Roadmaster Active Suspension Kit for a 2002 Chevy Suburban 1500, 4x4. | RoadActive # RAS4611 Active...

I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much does trailer weigh. | I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much...