Roof Rack Recommendation for 2006 Chevy Uplander
I have a 2006 Chevy Uplander with no rails. I also have a railing foot pack from Thule that was from another care. As part of that rack, I also have at least 2 and maybe 4 of the cross bars. Is there a way I can get new feet for the uplander...
How to Pick Out a Weight Distribution System for an A-Frame Trailer
What weight distribution hitch would fit on my trailer tongue? Here are photos. | You have a pretty standard A-frame trailer frame that would work well with weight distribution hangers and brackets. You may have to temporarily remove the battery...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Installing D-Ring Surface Mount Tie-Down Anchors on a Aluminum Snowmobile Trailer
My question is where on the aluminum frame of my trailer can I attach my Surface mount D-Ring anchors without weakening the frame to where it will crack. Or should I just go through the wood decking but its to hold my four wheelers down on...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Where do 2 Blue Wires Connect for the Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump
If a furnace is not in the RV can the two blue wires be connected together to complete the circuit so it produces heat? | The blue wires for the Atwood Air Command Rooftop RV Air Conditioner w/ Heat Pump # AT15028-22 actually connect to the...
Trailer Hitch And 7 Pin Wiring Setup For A 2008 Chevy Uplander
Have a car hauler with electric brakes and battery. Just bought a 2008 Chevy Uplander work van. Need class III hitch, and wiring/ brake controller set up. 7 pin round plug. Please advise. And where is the plug in if there is one ? | We can definitely...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
How Does Hitch Install on Chevy Uplander with Load Leveling Compressor
my uplander has the leveling compressor, what additional work is required? | On your Chevy Uplander, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75278 will fit with your load leveling compressor. It will take...
Items Needed to Tow a Trailer with a 2011 Lexus RX350 Without Tow Package
I bought a 2011 RX350 Canadian version that was not ordered with the tow package. What do I need to install to properly tow our 2500 lb boat? | To tow your boat trailer with your 2011 Lexus RX350, you will need a trailer hitch, wiring harness,...
Parts Needed to Tow Trailer with 2008 Chevy Uplander
I have a 2008 Chevy Uplander with the 3.9l and am looking forward to summer here in South Dakota and getting out fishing. We had a child and my regular cab truck will not work well for the family to go camping this summer. I am wondering if...
Parts Needed to Flat Tow a 2007 Chevy Uplander
Hi,can you flat tow this behind my motorhome | We do offer parts to allow your 2007 Chevy Uplander to be flat towed behind a motorhome. You would need to first start with a base plate kit. For that you would want the # BX1663. In addition to...
Installation Of Draw-Tite Trailer Hitch Receiver # 75278 On 2006 Chevy Uplander With Load Compressor
Installing Trailer Hitch on Chevy Uplander. It looks like my hitch will be delivered tomorrow and I am trying to be proactive today by lubing the bolts and making sure the vehicle is prepped. My question is how do I mount the driver side since...
Can 2008 Chevy Uplander be Flat Towed
Can a 2008 cheverolet uplander cargo be flat towed if a lube pump is added? I believe it should have the 4-speed 4T65-E automatic. | According to the online owner's manual of your 2008 Chevy Uplander it looks like you can't flat tow your vehicle,...
Why Does Firestone Coil-Rite Air Helper Springs Come with 2 Air Lines
Install on F4155 shows two separate air lines. What if one leaks more than the other? Any way to equalize into one fill line? | Well you would not want either bag to leak! But you can use a T-fitting to run both lines to one line and fill...
Recommendation for Complete Towing Setup on a 2007 Chevrolet Uplander 3.9 Liter
I want to tow 2600lbs travel trailer 19ft long it has trailer brakes. Can I safely tow this trailer? What do I need.... 7pin wiring harness, class 3 hitch, brake controller,trans cooler? Has anyone else done this? | I did some research on your...
Using a Taillight Converter to Wire a 2008 Chevy Uplander for a European 7-Way Trailer Connector
I live in Sweden and have recently purchased a Chevrolet Uplander 2008 with no trailer hitch. I want to install a trailer hitch using the trailer harness that came with the car, GM P/N 15871948 with wiring: - Red/white, Power always hot - Dark...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Hitch, Wiring and Ball Mount Kit for 2007 Chevrolet Uplander Towing Multiple Trailers
I have a 2007 Chevy Uplander LT extended. Which is the better hitch to install? Drawtite or Curt? I am looking for a class III 2, best rated, easiest to install. I plan to tow a small utility trailer, small fishing boat and use it for a...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Filter Your Search
Contact and Help