Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
I’m looking for a rear light that is 10” x 4” , do to show or can direct me in the right direction, also does this “ DG52720PB- LED Trailer Light w/ Reflector - Brake, Tail, Turn - Surface Mount - Rectangular - Red “ come chrome | Hey Sam! Great...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Can a Taillight Converter Module Go Bad After Working Properly for Months
Is it possible for the Circuit Protected Modulite Powered Taillight Converter to go bad? I installed this several months ago and now it does not work. Using a test light, all circuits work beforeinch the converter, but nothing works afterinch...
Trailer Wiring Recommendation for 2006 Mazda Tribute That Doesn't Require Finding Relay Location
I saw on a post it said the relay would have to be installed in a block behind the dash please explain | While I have a much easier trailer wiring solution than the # 40455 that you referenced for your 2006 Mazda Tribute there is a good chance...
Recommended 4-Way Wiring Harness and Connector for a 2005 Mazda Tribute
I have a 2005 Mazda Tribute with a 4-pin harness plug that has a rubber sleeve that mounts into a metal bracket. The plug is intermittent, and I need to replace it. I can send a photo of the plug. I want to know if you have this type of...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
How To Wire 6-Way Square Connector on 2000 Viking Popup to 2001 Mazda Tribute With 4-Way Flat
Is there a ready made connecting harness between 2000 Viking popup 6-Way square and 2001 Mazda Tribute 4-Way flat? I do not need anything other than lights so the six way is not necessary. Thanks. | I do have a few solutions to wire your 2000...
Which Fuse of 2005 Mazda Tribute with Tow Package for Activating Circuits
I have a 05 Mazda tribute with the towing go plug in need to know what fuse I need to make it work or relay and where does it go in fuse box | From customers we've learned that the fuse slot number 1 is the one associated with activating the...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Replacement Top Channel Cover For Thule Aeroblade Load Bars
I see the replacement strip for the Aeroblade is listed at only 59. Is there a different part number for the ARB60? | The Replacement Top Channel Cover for Thule AeroBlade Load Bars - 59" Long - Qty 1, # 852-5402-005 is the correct part for...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Trailer Wiring Harness for a 2008 Mazda Tribute without Factory Tow Package
Have bought your 118251 only to find my car does not have relays and is not wired for relays. Can I buy the other parts I need to make my 1 18251 into your 118551 Thanks | If your 2008 Mazda Tribute did not come with the factory tow package...
Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo
This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...
Roof Rack for 2005 Mazda Tribute With Raised Side Rails for Rooftop Tent
Hello. I have a Mazda Tribute 2005 and i would like to put a roof tent in there. I only have the original racks and i dont know if changing them would be ok or i would be still on risk? Another company told me even changing them is not safe... Thank...
Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath
Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...
Filter Your Search
Contact and Help