Result:

Hi there, I was reading a review on this bed extender but wanted to make sure that the information was either correct or incorrect before ordering. Please see excerpt. The length of the main support bar was previously ~ 52. This meant that...

I have a 2001 4 wheel drive Ford Ranger with the small rear doors. I followed the instructions that came with the package. I found that the only bolt I could find to remove on the floor panel appears to have a bushing on it and looks like...

As far as I can tell, 2001 Ford Rangers did not come equipped with a cabin air filter, but I would like to retrofit mine with one. Does this part fit within the existing fan box? | Hey Erik, According to my research the PTC Custom Fit Cabin...

I am looking for the hardware to install a set of Weston nerf bars. I have the bar and mounting bracket but no hardware,nuts, bolts, and the small plate with the nuts welded to it for the front mount | Hey John, What's the year/make/model of...

I want to flat tow a 2001 Ford ranger XLT 4x4. I have a 483-1 bracket already installed. 2 questions for now: 1 What towbar model is best for this application ? 2 what braking system is recommended for this vehicle. I am towing behind a class...

Part #: 87161 and Part #: 75082 Your installation video shows this hitch does not require drilling, but is showing installation on a 2008 Ford Ranger. I have 2001 Ford Ranger and need to know if these require drilling. Please advise. |...

Can a 2001 Ford ranger 4x4 with a transfer case switch that only has 2hi, 4lo, and 4hi only be flat towed with tow bar or tow dolly | You can flat tow your 2001 Ford Ranger 4x4 as long as you have the manual transmission. If you have the automatic...

What do I need to tow a ford ranger with adjustable tow bars with a expedition 2003 ranger 2001 2 wheel drive | In order to safely flat-tow your 2001 Ford Ranger you will need 5 items. You will need base plates, a tow bar, safety cables, lights...

I am looking for a replacement door for a fsre21sa-bl furrion range. Do you have a part or part number for it Thanks | Hey Steve it looks like the oven you're referring to has been marked obsolete by Furrion so there are no replacement parts...

Where would I find the transmission lines in my 2001 Ford Ranger? | One of my co-workers here happens to have a 2001 Ford Ranger with 4.0 Liter engine and automatic transmission, so I went out and checked under the hood. The transmission lines...

What reese hitch will I need for my 2001 ford ranger xlt truck? 2wd. | Draw Tite is actually made by the same company as Reese who no longer puts the brand name of Reese on their hitches. So what you'd want is the Draw Tite hitch part # 75082...

I just want to confirm that this will work on a 2001 Ford Ranger? | It's always a good idea to check, and I did verify with the manufacturer for you that the Air Lift helper springs are confirmed to fit your 2001 Ford Ranger; the correct part...

What # do I need for a ford ranger2001 stepside | The Draw Tite hitch part # 75082 that you referenced is designed to fit the step bumper models of the 2001 Ford Ranger like what you have so it would fit and work well. It has a 2 inch hitch...

Have a 01 Ford Ranger without tow package. Have trailer 7 way plug hooked up to factory 4 way plug. Run 12 v wire to the trailer brake pin and no recognition by phone. Should I have hot wired to trailer power instead of trailer brake to work?...

my hitch arrives tommorrow was told my spre wuld mount back up after install hitch if u dont think it will i need to return it and get the hitch that will clear spare tire i purchased part # 13019 please reply asap thnks | The Curt Trailer Hitch...

Will this fit a 2001 Ford Explorer Sport Trac? | The Rightline Truck Bed Tent # RL110770 unfortunately will not fit your 2001 Ford Explorer Sport Trac. It looks like the correct tent would've been 110907 but it has been discontinued. So for...

I am looking at getting a 2001 Ford ranger flareside and was wondering if there is a combination of bed racks that would allow me to use a camper shell or tonneau cover at the same time? | I have a two different combinations you can go with...

Need replacement installation kit and hard ward for westin grill for 2001 Ford ranger XLT | Hey Mat, for a Westin Sportsman grille guard that fits your 2001 Ford Ranger the correct mounting hardware replacement is the part # 40-088PK. |

A friend bought a used 23foot camper. When hooked to the sellers truck, all lights worked just fine. However, on his 2001 Ford Ranger newly wired hitch system, when you hit the brakes, all light dim. If you turn a signal light on, all light...

I need to know if this product is compatible for me 2001 Ford Ranger truck ? | The 4-pole wiring harness kit you referenced, Curt # C55510, is not a fit for your 2001 Ford Ranger but we do have similar wiring kits that will work fine for you. You...

2001 Ranger - utility trailer with 4 prong flat connection Lights on trailer shorted out and evidentally messed up my truck setup. Tested at truck side of hook up: Rt turn signal works, tail lights and Lf turn signals do not. Ground must be...

I bought a hidden hitch brand hitch part # 70181 for my 2001 ford ranger in 2016 that had better weight ratings than anything available now. Are they out of business? Cant seem to find their hitches anywhere. Found a sweet deal on another Ranger...

I need a replacement vinyl cover p/n 1114773 for my Truxedo. It is for a 2001 Ford Ranger with stepside body and 6 foot bed. The complete cover and frame p/n is 347101. What is your p/n for the replacement vinyl? The p/n above are from the...

Will I still be able to use Spare Tire Mount with this Hitch Installed? | According to Curt Manufacturing, installing the Class II Receiver Hitch, part # 12012 will NOT require relocation of the spare tire bracket. Although not expressly mentioned...