bing tracking image

/Trailers   >   Rav4  x   >   Raptor  x   >   Rabbit  x   >  

Hitch Recommendations for a 2007 Volkswagen Rabbit with a Dirt Bike

If you get this trailer, or any other open utility trailer, you would need also purchase a wiring harness. | i am looking a getting a hitch set up for my 2007 volkswagen rabbit. i am not planning on towing...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is...

Can Swagman XC Platform Bike Rack be Used on the Back of a Tent Trailer

Can this rack safely be mounted on the back of a tent trailer? | Can this rack safely be mounted on the back of a tent trailer? | We do carry hitch mount bike racks that are rated behind trailers but unfortunately the Swagman...

Recommended Weight Distribution System For Prolite S Camping Trailer

Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? | Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution...

What are the Differences in the Class III Trailer Hitches for a 2008 Toyota Rav4 Sport Edition

To complete your towing system, you might also need the following: Trailer wiring harness with 4-pole trailer connector, # 118412 Ball mount, # C45010 1-7/8 inch trailer ball, # 19260 2 inch trailer ball, # 63845 Locking hitch pin, # e98882 I have provided links to the install instructions for the hitches I recommended, as well as some install videos that you might find helpful. |

Lights On Trailer Dim When Headlights Of My 2007 VW Rabbit Are Turned On

It is also possible that your problem lies within the wiring of the trailer. There may be a bad ground connection on the lights of the trailer. | I bought the 119250KIT as recommended from your site. I've hooked...

Trailer Hitch, Wiring and Ball Mount for 2008 VW Rabbit

need to buy a motorcycle trailer hitch and required accessories. Renting motorcycle trailer from UHaul. | need to buy a motorcycle trailer hitch and required accessories. Renting motorcycle trailer from...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

The correct replacement hardware kit for the Curt Trailer Hitch Receiver part # C11074 on your 2009 Volkswagen Rabbit is the Replacement Hardware Kit for Trailer Hitches part # RHK. | Hi - I recently received...

How to Make a Reese Bike Rack More Stable in the Hitch of a 2009 Toyota RAV4

Sounds like you will need an anti-rattle device to make your bike rack more stable in your Toyota's trailer hitch. I recommend the Pro Series Anti-Rattle Device for 2 x 2 Inch Trailer Hitch Receivers, # PS63091. ...

Trailer Hitch, Ball Mount, Balls, and Wiring for a 2008 Volkswagen Rabbit

For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 119250KIT. Installing trailer wiring on a 2008 Rabbit is going to be different than what the wiring instructions actually say. |

Is Fascia Trimming Required to InstallCurt Trailer Hitch C11074 on a 2008 Volkswagen Rabbit

There is no fascia trimming required to install Curt trailer hitch # C11074 on your 2008 Volkswagen Rabbit. | Installation instructions for this part Curt Trailer hitch indicate that minor fascia trimming is required for installation...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. | I purchased the replacement CURT trailer hitch hardware from eTrailer for...

Recommended Method to Transport 300-lb Motorcycle on 2007 Volkswagen Rabbit

With this you can use ball mount # 3594 and either 1-7/8-inch ball # 19256 or 2-inch ball # 19258, whichever matches your trailer's coupler. If the trailer has lights then for a wiring harness use part # 119250KIT. |

Hitch Recommendation for a 2007 Volkswagen Rabbit

| A 2000 lb capacity trailer hitch would be like the Curt Trailer Hitch Receiver with Drawbar, part # 11074, that you referenced. | Hi, I am looking to get a hitch to install a bike rack on my 2007 Rabbit?...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. | I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

Due to the MX (Multi-Plexed) wiring system on your 2008 Rabbit, you will need the Tekonsha Wiring Kit, # 119250KIT, to add trailer wiring to your vehicle. This kit actually connects without splicing into your current wires, they just clip on and can read the signals through the wires. |

Class II and Class III Trailer Hitches for 2016 Toyota RAV4 Hybrid

If you plan to tow it will also deliver higher tongue weight and trailer weight ratings. I linked both an install video and a helpful article to help your installation. | I am purchasing a 2016 Toyota RAV4 Hybrid and would...

Looking For Yakima Bike Rack for 2015 Toyota Rav4

Lastly, if you are still needing to install a trailer hitch to your vehicle in order to attach the desired accessories (bike rack, etc), you can use # C13149 which is custom fit for your Toyota Rav4. | I have a 2015 toyota...

Is Trimming Required for Installation of the 2008 Volkswagen Rabbit Hitch # 11074

No, installation of the Curt Class I Trailer Hitch, item # 11074, on a 2008 Volkswagen Rabbit does not require trimming of the rear bumper fascia. | Does this hitch require trimming of the bumper? | No, installation of the...

Trailer Light Kit wiring attachment, TL29BK

What holes on the back lights do you use for this wiring, there are several holes to plug into and how do you do this-stripped ends or leave plastic covering on ? | You plug the corresponding wires on the TL29BK kit into the upper (larger) holes...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

| The Curt Trailer Hitch Receiver part # C11160 is a fit for a 2010 Mini Cooper Convertible with single exhaust. | have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The...

What Is The Best Way To Carry Bikes On A 2013 Toyota Rav4 EV

There is no roof rack, spare tire or trailer hitch options. I DO have a Thule roof rack for my 97 4-Runner but would need stand-off supports etc. | Hello, We have purchased a used 2013 RAV-4 EV. This uses the 2012 body...

Filter Your Search