Comparing the Convert-A-Ball Dual-Cushioned Ball Mount To Other Cushioned Ball Mounts
Hello we have an Aluma car hauler that doesnt exceed 5000 lbs, and a short wheelbase 1/2 ton pickup tow vehicle. The trailer imparts motions to our truck that doesnt feel comfortable, so we would like to purchase a device to absorb the trailer...
How to Tell if Hollywood Racks Destination E Bike Rack Will Clear Spare Tire
Will the Hollywood rack fit a jeep with a spare tire carrier on the back? | It depends on how much spacing you have from the center of your hitch pin hole to the farthest part of your spare tire. The Hollywood Racks Destination E Bike Rack #...
Dimensions and Recommendations for a 5th Wheel Trailer to Gooseneck Hitch Adapter
Can you provide deminsions for the adapter? What is the radius or diamenter of smallest point and largest point? What is the total length totally extended to 16inch inches. Any other deminsions would be appreciated. | At the absolute most narrow...
2-Bike Trunk Mount Bike Rack that Doesnt Use Top Hooks for a 1998 Subaru Forester
Hello. I have a 1998 forrester and am looking for an inexpensive 2 bike rack. I previously bought an allen 102db, but the clips dont fit onto the top of my hatchback. it is a 5 speed if that matters. Thanks so much. | All trunk mount bike...
Lockable Tonneau Cover Recommendation for a 1998 Toyota Tacoma with a 6 foot bed
does any of your tonneau covers lockable? | Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you...
What Wires Are Used To Install Pop & Lock Custom Tailgate Lock On 1998 Dodge Dakota
How do i find the wires? The video provided on YouTube is nothing like my truck. | The wires you need to install the Pop & Lock Custom Tailgate Lock, part # PAL8100 can be found behind the driver side kick panel on yoru 1998 Dakota. They will...
Bike Rack For Carrying Carbon Fiber Road Bike With A Class 1 Hitch
I know this question has been asked before, but I really am sold on the Hollywood Destination 2 rack, but I would really like to figure out a way to solve the carbon bike compatibility problem. I have a Cannondale Synapse 105 carbon bike, weighing...
Is it Possible to Attach a Bike Rack to Pro Series # 63153 Cargo Carrier
Is it possible to attach a bike carrier to the cargo carrier # 63153? i can see in the pictures that there is an opening that could be use it to attach the bike carrier if the proper holes are in place. I saw in another web site that they offer...
What Can I Use To Haul 5th Wheel Trailer With My Gooseneck Hitch on 1998 Chevrolet Pickup Truck
it says in the infonmation part of the fifth wheel hitch that it will not work with my goose neck hitch, because my hitch has the removedable ball/, but I call the number you have listed and the man says that is what I need. We are talking about...
Installation Of Pop & Lock Manual Lock For 1998 Ford Ranger Tailgate
How does this unit install? Does it fit and lock under my tailgate handle? Do I have to dis-assemble my tailgate handle to install it? Let me know exactly how it installs. Thank you Pop & Lock for 1998 Ford Ranger w/ steel handle - | Pop & Lock...
Trailer Hitch for Bike Rack for 1998 Ford Explorer
I have an 98 explorer and it has rear step bumper and has heavy duty bracket rite behind bumper with two holes do you make a hitch to bolt up to that or one for bumper all I want it for is bike rack no heavy hauling just need or a ball to receiver...
Curt Hitch # C13035 Recommendation for a 1998 Chevy Astro Van
what are the diferences from class 2,3 or 4 for trailer hitch for chevy astro van 1998... | The reason there are hitch classifications is to easily differentiate the different towing capacities for various hitches. Generally speaking, the...
Blow-Up of Diagrams In Pop & Lock PAL2300 Instructions for 1998 Ford Ranger Tailgate Lock Install
I have 1998 Ford Ranger metal handle. I purchased PAL2300 trying to install but diagram to small please help me | The # PAL2300 is indeed the correct locking replacement tailgate handle for your Ranger. I have provided a blow up of the diagrams...
Weight Distribution Shank or Ball Mount with 8 Inch Drop to Tow Airstream Level with 1998 Suburban
I have a 1998 K1500 Suburban. Without measuring, it appears that I have to drop my hitch with levelers and antisway bar approximately 8inch in order to tow the trailer level. What would you recommend? | It sounds like you are using weight...
Replacement Hardware for a Hitch on a 1998 Ford Windstar
Do you sell the bolts and washers and nuts for a hitch? I have a 98 windstar and I have the hitch that was taken off it, I want to put it back on but need bolts, leaders and a wiring quick kit. Thanks for any help you can give. | We can obtain...
Recommended Hitch Stabilizer for Hollywood Racks Bike Rack and Draw-Tite Hitch
I bought a Hollywood rack HR1460Z-E from you last year, and this year a Class III Draw-tite hitch for my Ford Explorer. I need a hitch tightener for these that will help eliminate some of the vertical wobble. Do you sell a hitch tightener...
Which Ball Mount Can be Used With Curt Trailer Hitch # 14053 for a 1998 Ford Econoline 250
I have a 98 ford 250 Econoline Van with a factory step down bumper. What length ball mount do I need with this hitch | The recommended ball mount for Curt Trailer Hitch # 14053 for the 1998 Ford Econoline Van is # 2923. However, for your specific...
Carrying 4 Bikes on a 1998 Subaru Legacy Wagon with 1-1/4 Inch Class II Trailer Hitch
Will this work with a 1.25inch class II hitch on a 1998 subaru legacy wagon? | The Hollywood Racks Sport Rider # HR1400Z is designed for 2 inch trailer hitch only. There are no 4-bike platform style bike racks that will work with a 1-1/4 inch...
What Can I Do to Fit the L-Bracket into the Housing of My Pop & Lock Handle on My 1998 Mazda B2500?
I have an 1998 Mazda B2500 which I bought used. My truck does not have the plastic tailgate handle. This one is steel, so I am now starting to think that it was replaced. But, in any case, the Pop and Lock bracket is not sliding onto the...
Is Pop & Lock Custom Tailgate Lock for 1998 Toyota Tacoma Keyed Alike
Is it possible to order multiple locks that are identical so they may be opened with the same key? | The manual Pop & Lock Custom Tailgate Lock # PAL5100 is only available with unique keys and from what I'm seeing there aren't any options that...
Will Pop and Lock Tailgate Lock PAL2300 Fit a 1998 Ford Ranger with a Metal Tailgate Handle
1998 Ford Ranger XLT side step Will this work with the side step bed tail gate metal handle ? | Yes, we confirmed with Pop and Lock that the part # PAL2300 will fit your 1998 Ford Ranger with a metal handle so this would fit and work well....
Filter Your Search
Contact and Help