Installation Of Pop & Lock Manual Lock For 1998 Ford Ranger Tailgate

Question

Question:

How does this unit install? Does it fit and lock under my tailgate handle? Do I have to dis-assemble my tailgate handle to install it? Let me know exactly how it installs. Thank you Pop & Lock for 1998 Ford Ranger w/ steel handle -

asked by: Richard

0

Expert Reply:

Pop & Lock Custom Tailgate Lock for Steel Tailgate Handle - Manual - Black # PAL2300 does install under your Ford Ranger's steel OEM handle. Installation will require disassembling your tailgate, but it is a very easy install. I've attached a photo of the installation instructions as well as a photo of the finished product.

expert reply by: Jason S

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The FasTen RV Leveling Blocks w/ Carrying Handle #CAM44512 can definitely be used to help jack up your travel trailer but then you'll want to add some chocks like part #FHG97ZR on either side of your tires to help ensure your trailer won't…

view full answer...

Answer 4

Hello Bill, thanks for reaching out. Yes, we do offer a replacement monitor for the TST TPMS. Take a look at the following: - Color Monitor for TST TPMS Systems #TST-507-D-C This will work with any of the TST-507 model TPMS and works with both the…

view full answer...

Answer 5

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

view full answer...

Answer 6

The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 will work on the A.R.E. MX series truck cap you have on your Tacoma. You can wire it so that the key FOB of your Tacoma will unlock it as well.

view full answer...

Answer 7

Thanks for the picture! We sure do! You will want the Replacement Motor for Stromberg Carlson Electric Landing Gear item #LG-142178.

view full answer...

Answer 8

For your ARE camper shell, if it has frameless bonded glass I recommend the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 or #PAL9772.

view full answer...

Answer 9

As long as your vehicle has power door locks and your ARE V-Series truck cap has a frame-less, bonded glass door with a 1-1/8" center hole for a rotary latch you can use the Pop & Lock Power Locking Handle, part #PAL9555. There are a few…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Installation Of Pop & Lock Manual Lock For 1998 Ford Ranger Tailgate

Product Page this Question was Asked From

Continue Researching