Recommended Replacement 3,500 Lb Axle With Brakes For Trailer
is 82-5/8 inches. The axle has 10 inch x 2-1/4 inch brake drum dimensions and a 5 on 4-1/2 inch wheel bolt | I am looking to buy a axle. I...
Replacement Suspension and Brake Parts for a 1973 Bara LS Trailer
hole 27 inch center to center x 1- 3/4 inch with six sheaves The axles have 10 inch x 2-1/4 inch | The trailer is listed as a 1973 Bara LS on the title, but...
What Parts Are Needed To Upgrade My Single 3,500 Pound Axle To Two 2,000 Pound Axles
Mounting Flange for 1-3/4 inch Round Trailer Axles - 2K # 4-34. To attach the hub and drums onto | Im taking out a single 3500 lb axle and putting back 2 - 2000 lb axles on my boat trailer. I know I can piece...
Leaf Spring and Parts Needed to Add Electric Brakes to 3,500 lb Axles
is 23-1/8 inches long. Adding brakes to the axle would not be hard either. For a hub and drum assembly we | I have a tandem axle trailer with #3500 axles. no brakes. I am replacing a broken spring. Should...
Is Dexter Spring DX95QR and Universal Group # SP-269275 the Same Spring
country 4/5 car hauler. 12k axles dexter with electric over hydraulic drum brakes I will need U bolts | Item # SP-269275 item # dx95qr Is there any difference in these spring leaf? 2018 sun country 4/5 car hauler. 12k...
Parts Needed to go From 2,800 lb Lippert Axles to 3,500 Dexter Axles on Trailer
with hub/drums and assemblies so that it's a one and done deal like with the part # 35545E-ST-89 which would work | How involved is it to upgrade a dual braked axle RV travel trailer with 2800 lb Lippert axles to use 3500...
Weight Distribution for a 2009 Cadillac Escalade and 10,000 Pound Enclosed Trailer
will be towing the ATC enclosed trailer, Full Perimeter Alum Frame, Coupler A Frame 2-5/16inch 10K#, 8.5 x 20 | Q what complete distribution assemble would I need for a 2009 Escalade all wheel drive, which...
Can 10K Leaf Springs be Upgraded to 3 Inch Wide 12K Springs for Gooseneck Trailer
inch wide springs for 10k axles to something stronger? 12k axle springs have 6 leaves, 3 inch wide | Weak springs on a 20+5 gooseneck trailer used on a farm Is their a way to upgrade 5 leaf...
How to Adapt CE Smith Trailer Axle Kit CE33201GA-HUB for 55-1/2-Inch Spring Spacing
face sizes are 60-inch as with # 20545I-EZ-60-10 and 72-inch as with # 20545I-EZ-72-10. If you want | Do you have an 1-1/2inch axel/hub kit similar to# CE33201GA-HUB with...
Upgrading Tire Size and Suspension on a Homemade Hovercraft Trailer
to a 6 inch wide, 10 inch diameter wheel like the Kenda 205/65-10 Tire and Wheel Combo 4 on 4 Bolt | I have a hovercraft trailer that is home built - freshly beefed up by yours...
Recommended Slipper Spring Suspension for 10,000 Pound Trailer
is made of 4x4inch structual steel 1/4inch thick walls, I would also appreciate instructions | Hi , I have a trailer with axles that are 3in diameter. The rims we will be using are 16s with 8 holes and I...
Replacement Axle and Leaf Springs for 1970s Shoreline Single Axle Boat Trailer
, with idler hubs or with hub/drums and electric brakes. These use rubber springs that are mounted inside | I have an old 1970s Shoreline Boat trailer that needs new leaf springs. They have rusted thru and broken. The spring...
Leaf Spring Recommendation for 1966 Aristocrat Lo-Liner
double eye springs with 10 leaves, and measures 28inch under load, maybe 26inch out of the box | I have a 1966 Aristocrat Lo-Liner, 13foot trailer, weighs about 2200 lbs. It currently has...
Slipper Springs Close to 24 Inches for Trailer Axle
I need to replace the leaf springs on my Cox Boat Trailer. Measurement is 24 inch eye to eye | I need to replace the leaf springs on my Cox Boat Trailer. Measurement is 24 inch eye to eye. Leaf springs are open-end slipper...
Replacement Leaf Springs for Dump Trailer with 3500-lb Axle
from 23-1/4-inches to 27-inches like # SP-210275. The spring you referenced, part # e27SR, is rated | I got 10 foot dump trailer with 3500 axle I want go for 7000 can you tell me what kind spring | If your...
Slipper Spring Replacement Solution for Boat Trailer with 20 inch Springs
at 10inch What do you have?? I was looking at the 24 1/2inch but the pin is at 12?. Can I mount | Howdy, I have a Sea Lander Boat trailer that has slipper springs 4 leaf 20inch long with...
Recommended 3500 lb Replacement Axle, Leaf Springs, And Hardware For Pop-Up Camper
with the leaf springs at 74 inches from spring center to spring center. This axle has the brake assemblies | Hello, My pop up camper has a Dexter Axle, Tag Reads: Dexter Axle P- 11 Model SLR Can you give me pricing...
Replacement Axle for Smaller Boat Trailer with 1,800 lb Capacity
UC1 which can fit wheels down the 10 inch diameter. Then for a 10 inch wheel and tire you could use | I am refurbishing a small boat trailer that needs an axle, hub, and leaf...
Recommended Axle and Leaf Springs for a Harbor Freight 4x8 Foot Folding Trailer Model 90154
replace the axle and leafsprings. Hub-face-to-hub-face length is 60 inches | Hello - I have a Harbor Freight 4X8 folding/tilt trailer model 90154. Id like to completely replace the axle and leafsprings. Hub-face-to-hub-face...
Replacement Trailer Suspension For 1971 Aristocrat Starliner Travel Trailer
# e43SR. This axle measures 89 inches hub-face-to-hub-face, and spring-center-to-spring-center length | Hi, I am looking to replace the entire axle/wheel assemble as well as leaf springs on my 1971 Aristocrat Starliner trailer....
Replacement Slipper Spring for Lightweight 4 x 8 Folding Trailer
My present cracked slipper spring is 10inch from the eye bolt to the center bolt, and 23inch total | My present cracked slipper spring is 10inch from the eye bolt to the center bolt, and 23inch...
Replacement Leaf Springs for 1998 Coachmen Catalina 364 TBS
looking for replacement springs and u-bolts. They are currently 4 leaf and measure 26.5inch eye to eye. | I have a 1998 Coachmen Catalina 364 TBS. It has a base weight of 8,400 lbs and a carry capacity of 10,000 lbs On the...
Recommended Hanger Kit for Slipper Spring # SP-178275 for 1,500-lb Axles
-lb Trailer Axles - 24-5/8inch Long Item # SP-178275 | which hanger kit for leaf spring with radius end 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8inch Long Item # SP-178275 | The Single-Axle Trailer...
Determine Axle Rating by Measuring to Get Correct 2 Inch Wide Leaf Slipper Springs
- 10,000 lb Or More Axles: 5 inch diameter You said box section, so I believe you were talking about 2 | My axle measures 2 inch x 2 inch box section. Is that a 2000 lbs axle? What spring rating do I need? I...
Related Searches
Filter Your Search
Contact and Help