Replacement Axle for Smaller Boat Trailer with 1,800 lb Capacity
Published 03/16/2022
Products Featured in This Question
Question:
I am refurbishing a small boat trailer that needs an axle, hub, and leaf springs. The dimensions of the existing parts are shown below. Can you recommend what parts would fit? I found a CE Smith 1800lb axle that would fit but I could not find a compatible hub assembly for the 8” tire. Thanks for your help Slipper Leaf spring 1 3/4” spring width 23 spring length center to center 9/16” bolt Axle 46.5” spring to spring bearing 55.5 axle hub to hub 60.5 spindle length Tire 4.80-8 Load range B Max load 590 lbs at 60 PSI Bolt [email protected]”
asked by: Alan B
Expert Reply:
The CE Smith axle part # CE33201GA is the correct axle for your trailer based on all of the specs you mentioned. For a hub that can fit the smallest diameter wheel size you'd want the part # 8-259-50UC1 which can fit wheels down the 10 inch diameter. Then for a 10 inch wheel and tire you could use the part # AM3H490 and you'd be set.
The closest leaf spring to what you mentioned is the part # SP-113275 which is for a 2,000 lb capacity axle and is 23-1/2 inches long. You might need to move your hangers out to accommodate for this longer spring.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: bt150a
- Search Results: short hub
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Search Results: hub washer
- Search Results: hub nut
- Search Results: 1250 inch id trailer bearings races seals caps
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: spare tire carrier
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: 1500 lb axle
- Shop: Loadstar 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: Can a 205/65-10 Trailer Tire Fit in Place of a 5.70 x 8 Trailer Tire on a Popup Camper
- Q&A: Finding Replacement Axle For Jet Ski Trailer
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper