Search: trailer valet   >   Heavy Duty Receiver Hitch   >  

I went out to our warehouse and measured the Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems #90-03-9460. The length of the long side is 2-1/2" long, the short side measured at 1-1/2" long and the thickness of…

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

Some factory OEM brake controllers are compatible only with electric drum trailer brakes and will not operate properly with an electric-over-hydraulic (EOH) trailer braking system. Other controllers may have the flexibility to work with both types…

First of all, thank you very much for your service, and thank you for providing an entertaining read. Using a tow dolly instead of your current trailer jack will definitely help make moving your loaded boat trailer much easier. We do have options…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

Hey Eric, so to find out if the Lippert Manual Pull Out Steps #LC432682 are going to work with your 2022 Forest River Rockwood Freedom Camper you're going to need to locate the space available underneath your camper that lines up with the door…

90-120 ft lbs of torque is probably about right for your trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher.

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and a…

The etrailer Hitch Mounted Spare Tire Carrier #e98ZR that you referenced does not have a stated weight capacity but it would easily handle the weight of an 80 lb wheel and tire in the size of 245/70-19.5 so it would work well for you.

You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…