Search: Threaded Hitch Pin   >   !Weight Distribution Hitch   >   Trailer Jack   >  

You definitely want all of the hardware installed for hitch #C13272 or any hitch because how it attaches is part of how it gets its rating. It sounds like the problem you are having is a factory weld nut that is packed with grime and corrosion.…

In order to both carry bikes and flat-tow a vehicle at the same time, you'd need to use an adapter on the motorhomes hitch, I recommend the Roadmaster Dual Hitch Receiver Adapter like part #RM-077-2 as it's designed for this exact purpose. In…

The correct replacement threaded hitch pin for the Yakima BuckHorn 4 Bike Rack is the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers part #Y8890200.

Thank you for that info and we do have a replacement for the Titan hub 17214. That hub is for 2,500 lb axles, uses inner bearing LM67048 and outer bearing LM11949; the correct replacement for that is the following: - Dexter Trailer Idler Hub Assembly…

I can confirm that the bolt thread size on the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 is M16 x 2. This has a pin diameter of 5/8" with a 2-5/8" span. It is designed for etrailer cargo carriers that fit…

You'll need to utilize the hitch bolt included with the rack, as it's the correct diameter and has the correct threaded portion length to be compatible with the threaded boss inside the bike rack shank. For the locking portion, use part…

I went out to our warehouse and took some measurements for you. The #P313 Replacement Receiver Insert measures 1.31 in x 0.87 in while #P333 measures a bit smaller at 1.30 in x 0.75 in. See the attached images. #P313 is designed to replace the…

You'd want to put the convex side of the washer against the bolt head of the hardware that comes with the Curt hitch #C13146 when installing it. That way the head pushes it flat as you tighten it which acts as a lock nut.

The hitch pin bolt you'll need for a Thule bike carrier/rack is the Replacement Threaded Pin for Thule part #853-5917. It is indeed an M12x1.75 bolt which is roughly 4" long. I can't confirm compatibility of thread pitch for the…

All Thule bike racks use the same threaded hitch pin so you can use the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917. This is just the threaded bolt, and you'll need to use the flat washer, lock washer…

All Thule bike racks use the same hitch pin, so you will want the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917 or the complete pin and lock kit #THSTL2. This is the 12mm thread you mentioned.

The long hook part #050050 is the correct part for your Sportrack bike rack but it does not come with the other parts mentioned and we do not carry them at this time. Are the old components from your rack possibly reusable?