Base Dimensions of B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter
What are the dimensions for the base length x with I have a 1999 International 4900 crew cab flatbed | The base part # BWRVB3055 measures 18 inches wide by 18 inches long and is designed to mount in an opening that measures 20 inch by 20 inch. The...
Solution for Hitch Plate for 2015 International Prostar
I NEED A HITCH PLATE FOR 2015 INTERNATIONAL PROSTAR I HAVE THE MESSURE INSIDE THE C CHANNEL ITS 33INCH 1/4 [-33inch 1/4-] on the out side ^ [ ]^ I34inch-I...
2015 International Trucks Terrastar Trailer Hitch recommendation with 10K Tow Rating
I have a 2016 Nexus Phantom rv built on a 2015 International Terrastar Chassie that has a 10k tow rating. The factory hitch hangs down very low. Im looking for a replacement hitch that would fit inside the frame and still have 10k tow rating....
Universal Trailer Hitch to Mount to Bottom of Frame on 1995 International 4700
Looking for a trailer hitch for a 1995 International 4700 Low Pro. It has a 10 foot flat bed on it. The rear leaf spring hanger is bolted onto the out side of the frame. No room to weld a hitch on the outside of the frame. I need one that...
Dimensions of Buyers Products Hitch Plate with Receiver Tube 1809065
I previously asked a question about hitch plate 1809065, I do realize it’s intended for the Chevrolet/ gmc. It would be nice to have all the dimensions for the plate. I do appreciate the specifications given but what about the width and height...
Solution for Hitch Plate for 1996 International 4700 LPX
I’m looking for a hitch plate for my 1996 international lpx 4700. Will the buyers products 1809065 fit? | According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International...
What Is The Weight Rating For the Buyers Products Fabricators Hitch Plate # 3371809027A?
I have a 2000 international 4900 tractor trailer I’m going to install a pintle hook to carry up to 50,000 pounds. What is the weight rating on this item? | While the Buyers Products Fabricators Hitch Plate # 3371809027A does not carry a weight...
Recommended Air Brake to Electric Brake Controller for 1969 International Loadstar 1890 Truck
which controller would give better performance I have noticed that instead of using a brake controller like this one, 1300-80, it is recommended to use the , # 90885, brake controller. Is the electric brake controller as consistent with braking...
How to Get Replacement Hardware & Fish Wire For Curt Trailer Hitch Receiver
I am moving a Curt 13580 hitch from one Scout to another. Can I purchase the hardware kit along with the fish wire for the 1/2 bolts separate? | Yep, you can absolutely get the 1/2" fish wire and replacement hardware for a Curt hitch, including...
Recommended Air Over Electric Trailer Brake Controller To Replace Obsolete Warner 1300-80
We have an International 4400 series truck with air brakes that pulls a 10k forklift on a car hauler w/ electric brakes. Currently the truck is equipped with a Warner 1300-80 controller and it is broken. We are looking for a direct replacement...
Roadmaster Sway Bar that Fits 2016 International Terrastar / 2017 Nexus Phantom 33SC
Roadmaster says the 1179-124 does fit but you all say it does? A company installed a 580330 and it look backwards. | We have confirmed with Roadmaster that the sway bar part # RM-1179-124 that you referenced does fit the 2016 International Trucks...
Recommended Rear Anti-Sway Bar for 2016 Nexus Motorhome on International Terrastar Chassis
Rear sway bar for nexus international terrastar Does the rear sway bar mount in front of the rear axle, I need it to fit in the front of the axle because I have installed an air bag system in the rear of the axle. | The Roadmaster Rear Anti-Sway...
Trailer Hitch Receiver For 1997 International 3800 Bus
Hello I am looking for a trailer hitch that has fairly specific requirements to fit my bus. The mounting bolt holes need to be between 29.5-32 inch from each other Ideally this would be a Class 4 or higher tow hitch. Curious if you have...
Could Buyers Products Hitch Plate part # 3371809061A Fit 1999 International
Will this fit international 4700 outside to outside of frame rails 34 1/4”. | Hey James, dimensionally the Buyers Products hitch plate part # 3371809061A will match up to the frame rails of your International but beyond that most likely would...
How To Confirm Fit of Buyers Products Fabricators Hitch Plate
Is this the best option for my truck? I have a 1985 International S1900 dump truck. Thank you. Keith Claunch | I don't have any specs to determine fit of the Buyers Products Fabricators Hitch Plate like part # 3371809040 on any one vehicle but...
Recommended Conversion from Air Brakes on Vehicle to Hydraulic Brakes on Trailer
I have a 2009 international 4300 with air brakes .I want to pull my lowboy trailer that has vacum over hydraulic brakes . what do i need to do it THANKS | For your 2009 International 4300 with air brakes you will use the Hayes Air Actuated...
Recommended Brake Controller for International TerraStar
I recently purchased a 2014 terrastar international. I’m going to be using this truck to haul my 12k spray foam trailer. Unfortunately the truck was not equipped with with electric bakes . What would you recommend for high quality trailer brakes?...
What is Range of Curt Echo Mobile Brake Controller for Use with RV
Do you think that there will be any issues with using the Curt wireless brake controller on a 33 foot RV? I’m concerned about the Bluetooth signal strength traveling 30 ft they thr RV to reach the controller. | The range of the Curt Echo Mobile...
Will the Buyers Products Flatbed Hitch Plate Bumper Fit An International Durastar
Will this fit on a 2007 international durastar 4300 | The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on...
Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series
does this hitch come in a bolt on unit | The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4...
Heavy Duty Trailer Hitch For 1995 International 4700 Series Truck
will this hitch fit my 1995 International 4700 series truck | The Super Titan 4000 Weld-On Trailer Hitch part # 38124 will fit your 1995 International 4700 Series truck if the frame is approximately 34-1/4" to 34-3/4" which is the standard width...
Front and Rear Anti-Sway Bars for a 2016 International Terrastar - Nexus Phantom 33SC
I see that you advertise 2016 International Trucks Torrastar - Road master Rear Anti-Sway Bar for Trucks, Do you also carry the 1. Front Anti-Sway Bar, and 2. Steering Stabilizer | In addition to the rear anti-sway bar # RM-1179-112 for...
Will the Hayes Air Brake Control Be Compatible With a 2002 International 4400
Warner Air Utility Brake Control Code: 1300-80 Will this controller be compatible with a 2002 International 4400 with Air Brakes? I plan on pulling a 30foot BigTex trailer with tandem dual axels with electric brakes on both axels. | The Hayes...
Availability Of Heavy Duty Trailer Hitch Receiver For 2000 International 4900 Truck
What hitches do you have for a 2000 international 4900 truck. Class 4 or class 5 | There are a few options for your 2000 International 4900 Truck, but there is not a custom fit receiver available. The Super Titan 4000 Weld-On Trailer Hitch...
Filter Your Search
Contact and Help