Recommended Windshield Wipers for a High Octane Red 2018 Dodge Challenger R/T
What windshield wipers do you recommend for my 2018 Dodge Challenger? Im looking for the best possible ones. Thanks! | Hey Kyle, I recommend checking out the Rain-X Latitude Windshield Wiper Blade w/ Water Repellent Coating # RX5079279-2. I've...
Will the MagnaFlow Catalytic Converter Set for a 2010 Dodge Challenger SRT8 Cause Engine Light
Will these catalytic converters cause a check engine light on my 2010 SRT8 Challenger 6.1? | The MagnaFlow Stainless Steel Catalytic Converter Set part # MF16420 which is a fit for a 2010 Dodge Challenger SRT8 will not cause any check engine...
Parts Needed for 2017 Dodge Challenger to Tow Trailer
I sure wish someone could tell me why the factory does not recommend towing when I have way more than enough power and the tranny can be set to shift very firm with no slippage. Add to that a 8 speed automatic..I have asked many people yet know...
Possible Solution for Tire Chains to Fit a 2016 Dodge Challenger with 245/45R20 Tires
We just purchased a 2016 Challenger with 245/45R20 99V m s tires. We signed a disclosure that says the vehicle cannot be operated with tire chains but needs another traction device. Would that apply to the Thule self tensioning low profile...
Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
How Much Clearance From Hitch Pin Hole on Patriot Hitches Adjustable Drop Hitch Receiver.
Hi, I have a 2018 dodge challenger I already installed a hitch but now I need a riser of at least 10. I am looking at this one item # ph67sr. My only concern is if it will clear past the bumper on my car. | You will want to measure the distance...
What If I Exceed Weight Limit of Class 3 Hitch
What is the weak link if I put my 7 thousand pound trailer on this challenger. Will the frame of the car bend? I will be using an equalizer hitch. | Exceeding the weight rating of the vehicle or hitch could cause engine damage, transmission...
Is It Normal for Brake Lights Instead of Turn Signals to Flash When Using Hazards With Converter
Hi. I buy the Curt 2 to 3 wires converter to separate turn and brake lights on a Dodge Challenger 2017 and it works good. But when i turn on the warning signals, it blinks the brake lights instead the turn lights. There is a way to solve this...
Troubleshooting Turn Signals That Do Not Keep Flashing
Purchased a Curt 55534 wiring harness. Was easy to install but the turn signals on the vehicle and trailer only flashing 3 times then quit flashing they still have the flashing arrow on dash | If your turn signals work at first and then stop,...
Recommended Trailer Hitch for an RV Towing a Motorcycle Trailer
I have a ram 1500 ecodiesel and tow a 30 ft trailer about 6k lbs. I would like to either find away to put my harley in the back of 6.5 bed or attach a small mc trailer to travel trailer | The Curt Adjustable Width Trailer Hitch Receiver for...
Recommended Hitch for a Bike Rack on a 2010 Dodge Challenger
Hello, Im planning a new bike rack system for my car. I would like to go with a Kuat Serpa 2.0 bike rack mounted to a Curt 2 Hitch #13465. I dont have the hitch installed, so I cant take measurements to verify proper rack to bumper spacing. Can...
What is the Height of the Draw-Tite # 76145 on a 2016 Dodge Challenger for Choosing a Ball Mount
Hi, I need to know what height the receiver is from the ground when installed on a 2016 Dodge Challenger, so I can a suitable ball mount for my trailer. | When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 on a 2018 Dodge...
Class III Trailer Hitch with Best Ground Clearance for a 2016 Dodge Challenger
Im looking to purchase a hitch for my challenger, but i would like to know which one is most off the ground I have ordered a Curt hitch before and the 2 inch opening for the ball mount was welded under the actual hitch bar that attached to the...
Heavy Gauge Wiring For Lighting Functions on Trailer
Looking for a heavy wire gauge, 4-prong trailer wire connector set about 16 foot long. This will go on a simple open 3-rail motorcycle trailer. Im tired of the cheap flimsy Chinese wire sets always corroding from the inside out. Any help would...
Recommended Ball Mount For 2014 Dodge Challenger To Tow Trailer With 16" Coupler Height
I have a 2014 Dodge Challenger SXT with a Draw-Tite max-frame trailer hitch receiver Item # 76145. Im looking at buying Detail K2 mighty multi A-frame utility trailer Item # K2MMT5X7. But I need help picking which trailer hitch ball mount will...
Locating Replacement Hardware For Trailer Hitch Receiver For a 2012 Dodge Challenger
Looking for the trailer hitch mounting hardware kit ,for a 2012 Dodge Challenger. Ty | First you will need to verify the exact receiver you have for your 2012 Dodge Challenger. I have listed the different receivers we carry below. Once you have...
Trailer Hitch that Fits 2015 Dodge Challenger Hellcat
2015 challanger hellcat. fitment? | We do have a hitch that fits your 2015 Dodge Challenger Hellcat like with the Curt part # C12064 which we have had customers come back and tell us it fit their Hellcat well. |
Recommendations for Carrying 3 Bikes with a 2010 Dodge Challenger
I have a 2010 Dodge Challenger I need a 3 bike rack. I cant find my model on your list. Do you have one with locks for my vehicle?? Thank You, | I do have a solution that would allow you to carry 3 bikes with your 2010 Dodge Challenger, but...
High Capacity Hitch Recommendation for a 1998 Damon Challenger
I need a heavy duty hitch for my 1998 Damon challenger. | I have a solution for you, but we do not have any custom fit hitches that will fit your 1998 Damon Challenger. You will need to go with a high capacity multi-fit hitch like the # 41990...
What Types of Jacks do the Bulldog Powered Jack Motor Kits Fit
I have a goose-neck trailer with two 10000lb capacity jacks the jack on the right has the 2 speed gear box mounted on the right side between the trailer frame and jack. will I need to get into the two speed gear box to install the powered-Drive...
Availability of a Trailer Hitch to Fit a 2016 Dodge Challenger Hellcat
Will this hitch fit my 2016 Challenger Hellcat? If not is there another hitch that will? | The Draw-Tite Class II Trailer Hitch Receiver, # 36548, will fit a 2016 Dodge Challenger if your vehicle does not have the quad-tip exhaust. Since your...
Parts Needed to Add Electric Drum Brakes to Rear Axle of Tandem Axle Travel Trailer
Hello, I am looking to replace my current electric brake assembly with AKEBRK-35-SA on my tandem axle travel trailer. My front axle has brakes that are worn, however the rear axle does not have any brakes. Apart from wiring, what all do I need...
Trailer Hitch Availability for a 2016 Dodge Challenger SRT
RE: Curt C13093 Please confirm that it fits 2016 Dodge Challenger SRT. The installation instructions indicate that fitment is for Charger and Chrysler 300. | Yes, the Curt hitch part # C13093 that you referenced has been confirmed as a fit...
Does 2019 Dodge Challenger Curt Hitch 12064 Fit Quad Tip and Non-Quad Models
2019Dodge Challenger. I am interested in the curt c12064. I currently have stock exhaust but may convert to quad exhaust. You list the same part # c12064 for two different applications except quad exhaust and one with quad exhaust. I am confused?...
Filter Your Search
Contact and Help