Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
Does the Prodigy P2 Trailer Brake Controller Have to be Mounted Level to Function Properly
Brake controller setup/mountain On my prodigy P2 does it have to be mounted level to operate? | The Tekonsha Prodigy P2 # 90885 does have requirements for mounting. The P2 must be mounted on a level horizontal (side-to-side) plane and must be...
Does Buyers Products Hitch Plate Fit 1996 Ford F-350 Cab and Chassis
WILL THIS HITCH PLATE FIT 1996 FORD F-350 ?? WHERE CAN I MOUNT EXISTING TAIL LIGHTS ? ALSO LOOKING FOR A SIMPLE WIRE KIT FOR SAME TRUCK | The Buyers Products Hitch Plate with Receiver Tube - Ford # 3371809060A will indeed fit a 1996 Ford F-350...
Ladder Rack Recommendation for 1992 Ford F-250
I am looking for a product to fit on top of a 92 ford f250. It has rain gutters on it. I would like to but a rack on top. Do you thing the Rola Haul Ladder rack would work? | We have a similar ladder rack that does fit your 1992 Ford F-250...
Does Front Hitch # 31311 Fit With Front Sway Bar of 1994 Ford Truck
Mounting brackets for front stabilizer bar are inboard of frame rails attached to a bracket bolted to frame rails.Are there additional parts and/or instructions needed for installation ? | The Curt front hitch part # 31311 that you referenced...
Hooking Up Brake Controller to 1995 Ford F-250
I have a 1995 F250 7.3 L Powerstroke Turbo Diesel with two batteries, obviously, and was wondering if the hookup would be any different? | The process for hooking up a brake controller on your 1995 Ford F-250 is going to depend on if you have...
Trailer Hitch Receiver Tube Drop on the B&W Hitch Part # BWHDRH25198 and Curt Hitch Part # C15511
trying to find out the from the frame to the top of the reciever tube on theses two item b and w hdrh25198 curt 15511 i see different measurements from differt sites | The distance from the top of the mounting flange to the top of the receiver...
Camper Tie Downs that Fit 1992 Ford F-350 Long Bed with OEM Hitch
Hello- Looking for a rear camper tie down for my truck: 1992 Ford F350 Crew Cab Long Bed 4X2 No side steps under truck bed OEM hitch What REAR tie downs will work for my truck? Thanks! | While Torklift doesn't have any rear camper tie down...
2005 Ford F-350 Trailer Brake Disconnect Problem
2005 Ford 350 HD break controler Break controler consitently giving false Trailer Disconnect message and when it does you have no breaks. Only last for sec. or two then brakes are back on. Have you heard of this problem. | Yes, I have seen...
Converting Vehicle 6-Pole Wiring to 7-Way for Using Curt Echo Brake Controller C51180
If my tow vehicle is equipped with a 6 pin receptacle, can use an adapter to convert to 7 pin flat and then use the Echo brake controller? | Yes, you could use an adapter like # 47435 to convert your 6-pole wiring to the 7-way format to allow...
Recommended Tire Chains to Fit 305/70-16 Tires on a 1995 Ford F-350 with Truck Camper
re: tire chains, what does Assisted and Manual mean? And what chains are best for an 1995 f350 4x4 with 305/70-16 tires and a truck camper? Thanks | Automatic, assisted, and manual are how the chains adjust onto your tires. Some tire chains...
Brake Controller Installation 1993 Ford F350
I have a Tenkosha P2 brake controller that I need to book to my 1993 F250 7.5L. Im guessing that 3035-P is the correct harness? It says Ford, but doesnt list what years. Where does this plug into the truck? Under the steering wheel somewhere,...
Underbed Rail Kit for a 1993 Ford F-250 with an 8 Foot Bed
What part number will fit the above truck? 8 ft bed. Correct under bed rails for a 1993 F250 | The only underbed rail kit we have for your 1993 Ford F-250 with the 8' bed is the Custom Underbed Installation Kit for B&W Companion 5th Wheel...
Class V Trailer Hitch Fit for 1993 Ford F350
does it clear this rivet 1993 f350 frame rivet at rear | Because the mounting flange of the Curt # C15511 Class V hitch has 3 tabs on each side, rather than a continuous mounting flange like many other hitches, it'll fit around the rivet shown...
Recommended Nerf Bars for 1996 Ford F-350 Crew Cab For Up to Rear Wheel Well
WANT THEM ALL THE WAY BACK TO REAR WHEEL WELL TO BE ABLE TO STEP UP INTO BACK OF TRUCK. | The DeeZee Universal 4" Oval Nerf Bars - Aluminum - 68" Long - Black # DZ151-26 are a good choice and the longest confirmed fit. These most likely won't...
How to Install a Brake Controller in a 19995 Ford F-250 with 4-Way
My truck already has a 4 pin but need to install the 7 pin. How would I do that with this connector and a break controller? | To install a brake controller like our best selling controller the P2 part # 90885 in your 1995 Ford F-250 you will...
4-Way and Fifth Wheel 7-Way Recommendation for 1995 Ford F-250
I have a 95 f350 dually. I need a harness for my 5th wheel. It has a junk 4 way into original harness connectors, it also has trailer brake in cab, Im assuming its run in original harness since I cant find any wires running down frame. Do you...
Mounting Dimensions of Curt Manufacturing Front Mount Trailer Hitch, # 31026
what is the width measurement of the 31026 hitch from outside plate to outside plate | I spoke with my contact at Curt regarding front mount trailer hitch, # 31026. He stated that the distance from outside plate to outside plate is 40.6 inches....
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
Replacement Lid for Ventline AS-13M Roof Vent
Do you have this? Only the outside plastic cover. See photo | Yes, I can see from the photo you attached a continuous hinge which means the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03 is what you need....
Will the Buyers Products Hitch Plate Fit a Ford Super Duty Dump Truck
I have a 1993 F super duty with a 12foot dump bed. I need a trailer hitch to pull my 18foot trailer will the # 3371809061A plate fit my truck? | The Buyers Products Hitch Plate part # 3371809061A is a universal weld/bolt-on hitch plate. That...
Recommendation For Fifth Wheel Installation Kit Without Base Rails For 1995 Ford F-350
Looking at Reese quick install 5th wheel kit for my 95 F-350 dually. I have hitch and rails. Just need the install kit. Will be so much easier to put in. It also is 4 door cab and dual tanks if that helps. Thanks for any help. | The best option...
Rating of the Tow Loops on the Curt Front Hitch # 31311
I see the hitch rating for the 2inch receiver, but I cannot find any documentation on the rating for the tow loops on either side of the receiver. Do you know what the line pull rating is on the tow loops on this receiver? | Tow loops like what...
Replacement Side-View Mirror Options for a 1986 Tioga Arrow by Fleetwood
i have a 1986 ford f-350 Tioga Arrow by fleetwood, the shell of the Rv sticks out about 10.5 inches, will they extend that for from the door ? thank you | I pulled one of our CIPA Universal Door Mount Mirrors, # CM45000, and took some measurements...
Filter Your Search
Contact and Help