Will the Gustafson RV Puck Light - 4-1/2" # 277-000344 Fit My 2013 Itasca Navion IQ
Need 41/4 wide base overall 41/2 metal with 3 screw holes it is 11/4 depth. Can you help? | I spoke to my contact at LaSalle Bristol and he confirmed the Gustafson RV Puck Light - 4-1/2" - Recessed - 4 Watt # 277-000344 will be a replacement...
Can a P3 Brake Controller be Installed in a 2002 International 4300
Hey guys, I bought a Tekonsha P3 from you over 2 years ago and working great. I recently upgraded my tow vehicle from my Chevy Silverado to a 2002 International 4300 with Air Brakes. Assuming I have to go with a generic wiring set up. You have...
Can the Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver Be Bolted
is there a bolt on version of this hitch? | The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receivers like part # 38023 all require welding. They are universal hitches which require fabrication and modification for installation. In order to...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
E-Bike Carrier For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Can the Door County model be used with a small motorhome as well as an SUV? I will be moving the carrier between two vehicles, a 4Runner and a 25.5’ Itasca Navion. I love that it is on wheels - how high must it be lifted to install on a different...
Could Buyers Products Hitch Plate part # 3371809061A Fit 1999 International
Will this fit international 4700 outside to outside of frame rails 34 1/4”. | Hey James, dimensionally the Buyers Products hitch plate part # 3371809061A will match up to the frame rails of your International but beyond that most likely would...
Universal Trailer Hitch to Mount to Bottom of Frame on 1995 International 4700
Looking for a trailer hitch for a 1995 International 4700 Low Pro. It has a 10 foot flat bed on it. The rear leaf spring hanger is bolted onto the out side of the frame. No room to weld a hitch on the outside of the frame. I need one that...
Installation of Tekonsha Prodigy P3 Brake Controller on a 1995 International 4700
1995 International 4700 series truck air brakes and automatic tranny, is installation similar to install. on my old 1968 chevy C50 ? truck also has air suspension . I need to source a reciver hitch to mount to it. and a 7 blade vehical...
Solution for Bolt-On Hitch Plate for 2001 International Trucks 4700
Best bolt on hitch plate for a 2001 international 4700 | The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an...
Dimensions of Buyers Products Hitch Plate with Receiver Tube 1809065
I previously asked a question about hitch plate 1809065, I do realize it’s intended for the Chevrolet/ gmc. It would be nice to have all the dimensions for the plate. I do appreciate the specifications given but what about the width and height...
How Far Apart are the Bolt Holes on the Curt Trailer Hitch Receiver # C15302
What is the width of the frame bolt pattern? | The bolt holes on the Curt Trailer Hitch Receiver # C15302 sit across from each other 39" on center and are separated front to back by 7-1/2" on center. This is a custom fit for the following vehicles: 2008...
Replacement 10 Inch Trailer Brake Assemblies Available for Trailer
looking to upgrade the tires ,wheels and brakes on my gooseneck trailer , now having 15inch tires /wheels with 4 bolt attachment poss. 10inch brakes . I need 4 tires/wheels and 4 sets of brakes . I like this tire/wheel combo . any suggestions...
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
Bike Rack for E-Bikes With Fenders & Step-Through Frame on Motorhome
I am trying to make the right decision regarding a back rack for our 2 Blix Vika folding bikes. Our RV has a rear slide out so I would like a rack that tilts. The videos I see for Swagman or KUAT racks show the locking system attaching to...
Mounting Orientation of Tuson Electronic Sway Control System
I’m considering purchasing the TSC to help reduce periodic sway with my 97 Airstream “Squarestream” fifth wheel. I’ve tried all I can do to eliminate periodic sway, including getting a much larger truck AND tweaking the hitch location along...
Heavy Duty Trailer Hitch For 1995 International 4700 Series Truck
will this hitch fit my 1995 International 4700 series truck | The Super Titan 4000 Weld-On Trailer Hitch part # 38124 will fit your 1995 International 4700 Series truck if the frame is approximately 34-1/4" to 34-3/4" which is the standard width...
Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series
does this hitch come in a bolt on unit | The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4...
Solution for Hitch Plate for 1996 International 4700 LPX
I’m looking for a hitch plate for my 1996 international lpx 4700. Will the buyers products 1809065 fit? | According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
Filter Your Search
Contact and Help