Required Hardware for Replacement Large Claw Assembly for Yakima RailGrab
What hardware do I need to buy when I purchase the part #Y80144 Replacement Large Claw Assembly for Yakima Railgrab? Is it the part # Y8880148? | If you don't have the Replacement Adjustment Knobs # Y8880148 then you will need them to attach...
Will Curt Trailer Wiring Harness C56343 Fit a 2016 Ford Flex with LED Tail Lights
my flex is a 2016 and has LED taillights is this unit compatible? | Curt trailer wiring harness # C56343 will fit your 2016 Ford Flex with LED tail lights. I have linked a video that covers the features of this harness and linked the instructions...
How to Test Homemade 4-Flat to European 7 Pin Trailer Wiring Adapter
Vehicle: 2013 Ford Flex Limited without factory tow package Installed the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118472 I built an adapter using a 4 pole plug wired to a TowReady Tail light 2 wire to 3 wire...
Tow Bar Cover for a etrailer SD Non-Binding Tow Bar
Is there a cover specifically for this tow bar or one the you recommend that fits well? | While not specifically made for it, the etrailer SD Non-Binding Tow Bar item # e47ZR has a retracted measurement of 39-1/4". It will fit in the Blue Ox...
Recommended Trailer Brake Controller for 2014 Ford Flex SEL with Factory 7-Way Trailer Socket
I have a 2014 ford flex sel awd with factory tow package with 7 pin and I need to add a brake controller. You have so many options I dont know which one would be good for me. I am planning on towing a 3500lbs fishing boat with tandem axles and...
What Parts Do I Need To Install A Curt Trailer Hitch and Wiring On My 2011 Ford Flex?
What are all the parts I need to mount a hitch to my 2011 limited Ford Flex with dual exhaust? How do I attach the electrical for the camper Tail lights? Thank you so much! | All the parts you need to install the hitch is included with the Curt...
Why Would Trailer Hitch Install Hardware Seem Too Large to Fit Vehicle
We installed the Curt trailer hitch on our 2010 Ford Flex. Fits perfect but the bolts that came with it were to big we had to down a bolt size, is that common or is that yr of vehicle different from others? Just curious, thanks. | The problem...
Mounting Flange Dimensions and Weight Capacity of Curt Hitch # 13703
RE: Adjustable Width Trailer Hitch Receiver for RVs, 22inch to 72inch Wide Item # 13703 what is the width of the mounting flanges? is this the space needed on the frame to mount it? what is the weight of this produce? what is the weight capacity...
What Load Range Tire Do I Need For Triton TC128 Snowmobile Trailer
I have a snowmobile trailer. It’s a triton tc128. I was wondering if I could put this rim tire combo on my trailer? The size is the same but the load rating is different? The ones that came on the trailer are E rated. Thank you for any help...
How to Tow a Motorcycle with a 2008 Dodge Caliber
I currently have a CURT 117171 Class 1 Trailer Hitch with Ball Mount installed on my 2008 Dodge caliber sxt 2.0L I also just bought a dirt bike carrier 36lbs for 1-1/4 recievers. My dirt bike is 206lbs so the total is near 245 lbs. The dodge...
Troubleshooting Tekonsha Primus IQ TK90160 Having N.C Error Code
I have been using this controller for a few years without any issues. Recently it started having this issue. I have replaced the connector at the back of the car and I have the same issue. I happens with both of my trailers. I then tried attaching...
Recommended Weight Distribution Hitch for 2500 lb Boat Towed By 2019 Ford Flex
I have a 2019 Ford Flex with the class III trailer tow package. Do I need a weight distribution hitch to tow a 2500-lb boat with 250-300 lb tongue weight? Thanks | We typically recommend using weight distribution when the trailer weighs more...
What Installation Hardware is Used for the etrailer hitch e52AR on a 2019 Ford Flex
I have a trailer hitch part # e52AR what type of bolts are required and how many for installation on 2019 Ford Flex? Thanks | The Draw-Tite # 75679 uses 4 Hex Bolt M12 x 1.75 x 40mm CL8.8 and 4 Conical Toothed Washers 1/2”. You can get a replacement...
Can 2016 Ford Flex be Towed On Roadmaster Tow Dolly # RM-2050-1
2016 Ford Flex, AWD, 17inch wheels/tires...compatible | Yes, your wheel and tire size is perfectly fine to use with the Roadmaster Tow Dolly part # RM-2050-1 that you referenced. At one point Roadmaster listed this as only fitting up to 16 inch...
Trunk and Hitch Mounted Bike Rack Options for a 2011 Dodge Caliber
Will the Thule OutWay 3 Trunk Mount Bike Rack fit a 2011 Dodge Caliber? | The Thule OutWay 3 Bike Rack, # TH56BV, will fit on your 2011 Dodge Caliber as long as it is not the SRT4 model with the rear spoiler. The clips will attach to the top...
Trailer Hitch and Towing Accessories for 2017 Ford Flex with Dual Exhaust
Hey I have a 2017 Ford Flex Limited, Dual exhaustlet me know if you need other details. I want to confirm my hitch ion before completing the purchase because Ive seen some very different shapes available. Im looking at The curt 13551, but...
Canoe Carrier for 2010 Ford Flex that Doesnt Require a Roof Rack Installed
Whats the best option to carry our 15foot fiberglass Indian River canoe about 70lbs on a 2010 Ford Flex. Im not sure we want to buy the crossbars yet, we do have factory, raised side rails. Looking for maybe just an entry-level, inexpensive...
Comparing TImbren Jounce-Style and Coil SumoSprings for a 2012 Ford Flex
I am debating between the Sumo and Timbren suspension add-ons for my 2012 Ford Flex. Does one perform better than the other when it comes to pulling a trailer and utilizing a load disbursing / sway hitch? | I personally prefer the Timbren Kit...
Is a Powered Converter Needed to Add Trailer Wiring for a 2011 Ford Flex SEL
How do I know whether or not I need the kit with the converter or not? I have a 2011 Ford Flex SEL 3.8L V6 | If your 2011 Ford Flex SEL did not come with a factory installed 7-Way trailer connector then you can either use the T-connector without...
Inno Roof Rack for a 2009 Dodge Caliber SXT
hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand knobs for it as well though.. is there any available for this model for my vehicle? Thank you so much! | The...
Need 4-Pole Extension Wire for Cargo Carrier Light Kit # 52014
Many reviews recommend an extension for Cargo Carrier Light Kit For 52017 and 52018. Do you sell those? If so, how do I find the correct one on your website? Thank you. | We do offer a 4-foot extension wire equipped with 4-pole flat vehicle-...
Is a Ball Mount Required to Tow Trailer with 2007 Dodge Caliber
what is the drawbar used for and will i need to purchase on to tow a trailor with my 07 caliber. | Draw Bars are needed for towing. Another name for them, that to me makes more sense, is "ball mount" Basically this is the piece of metal that...
Will The etrailer Cargo Bag # 988501 On A Cargo Carrier Interfere With Exhaust On A 2010 Ford Flex
I have an 2010 Ford Flex with exhaust tail pipes on both sides. I was looking at the tow ready rear hitch cargo carrier 24 x 60 part # 63153 with the extra large carrier bag #988501. My concern is whether the exhaust gases coming from the tail...
Will Derale Engine Oil Cooler #D15502 Fit on a 2007 Dodge Caliber R/T
Will the Derale Engine oil cooler #D15502 fit on a 2007 Dodge Caliber R/T? | Yes, the Derale Oil cooler part # D15502 that you referenced will fit and work well on your 2007 Dodge Caliber R/T. I looked up the thread size of your oil filter and...
Filter Your Search
Contact and Help