Recommended Reverse Alarm And LED Lights For 2000 Toyota Land Cruiser
Sir/Madam I own a 2000 Toyota 100 Series Land Cruiser and am interested in purchasing White Reversing Beeper SMD/LED Light. My manual says the size I need is: 7440, 7443, 7441, 992 7440A. With the main reference is always made to the 7440....
Parts Needed to Install Brake Controller on 1998 Toyota Land Cruiser w/o Factor Wiring Harness
I have a 1998 Toyota Land Cruiser. According to the dealer, it did not have a factory trailer wiring harness. So I need to install one. I also need to install a trailer brake. I need I want to mount the wiring harness module in the vehicle,...
Recommended 4-Way Trailer Connector for 1996 Toyota Land Cruiser
Hopkins Land Cruiser parts I was wondering if this was it? Hopkins 43365 Thanks! 1996 Land Cruiser | The Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 43365 is a fit only for a 2000 Toyota...
Recommended Spare Tire Mounted Bike Carrier For 2007 Toyota Land Cruiser
Have a nice day. I have the LAND CRUISER of TOYOTA 2007 and we are interested in transferring two bikes to the rear, where there is also the spare tire on the door and the hitch is a ball of steel. There is dependence on these specifications. Thank...
Pioneer Platform Compatibility With Vehicle Rain Gutters
I have a vehicle with gutter mounts, do these mounts connect directly to the pioneer platform or do I need to also purchase cross bars? Some pictures Ive seen of the pioneer platform look like its connected directly to the gutter mounts, but,...
Tire Chain Recommendation for 2016 Toyota Land Cruiser with Tire Size 285/60-18
the owners manual recommends the side chain to be 0.20 in. [5 mm] in diameter and cross chain 0.25 in. [6.3 mm] in diameter Will these chains be appropriate? | You need tire chains that offer the best wheel well and frame clearance like a...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
Can I Carry My 70 Lbs E-Bike On Swagman Original 4, If Not, What Do You Recommend
Are their available threaded s for this bottom plate? Only the rearward bolt has a place to thread into. I would happily buy 3 new bolts and handles if I could restore that part of the system. I haul a heavy ebike which is about 70 lbs. The...
Will Spare Tire Still Fit with Draw-Tite Trailer Hitch Installed on a 1995 Toyota Land Cruiser
Do you have to remove the spare tire under the truck to mount the available 2 inch receivers and can the spare tire be replaced in the same location once the hitch is mounted? | Customers have reported that a factory spare tire will still fit...
Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller RED44FR
I appreciate your pictures on where to find the connection. My question is how to mount the redarc button in the panel? Do I drill a hole in the rectangular ? | The control knob in the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR...
Installing an Electric Trailer Brake Controller on a 1996 Toyota Land Cruiser with Tow Package
I have a 1996 Toyota Landcruiser with hitch/ and tow. I was advised that in order to tow a popup trailer 2009 Coleman E3 I am renting this summer I have to meet these regulations. 1. 7 round electric plug for power from truck to trailer 2....
Comparing the Different Harnesses To Install a 7-Way On a 1999 Toyota Land Cruiser
Goal is to add 7-way trailer connector with brake controller wiring to a 1999 Toyota Land Cruiser. Im looking at 2 viable options, and not certain which is better. My question is at the end. Option #1 is to use a wiring harness with converter...
Location of Brake Controller Connector in 2010 Toyota Land Cruiser
Cannot locate wiring harness for brake box installation in a 2010 Toyoya Land Cruiser. Looked in the 2 location offered by manufacturer | According to my representative at Tekonsha, Toyota always places the brake controller connector above...
Availability Of Wiring Adapter To Install Redarc Tow Pro Elite V3 In 2020 Toyota Land Cruiser
Hello I own a 2020 Toyota Landcruiser VX VDJ200 and I am interested in a plug n play harness to connect a Redarc Tow Pro Elite V3 to my vehicle. My vehicle is a V8 Diesel. Do you have such a vehicle specific harness for me? Cheers Das | As long...
Does the Autowbrake Require Re-Calibration When Power is Removed?
I have a vehicle that has a 7-pin connector and a trailer with brakes and batteries RV. When I park the trailer, I cut the power in order to save the batteries from something in the RV fully draining them. Will I have to recalibrate the Autowbrake...
Recommended Wire Gauge For Brake Controller Output and Ground Connection
Hello, which size of wire I have to use on a 7 round plug for my ground and brake controller white and blue wires ? Got a trailer with 2 braked axles. Regards | I'd recommend nothing smaller than 12 gauge, but 10 gauge would be better. When...
Preventing Trailer Battery From Backfeeding to Vehicle Battery on 2003 Toyota Land Cruiser
hello, I have a 2003 land cruiser. There is a known issue when towing an RV on this vehicle, it seems like the voltage from the batteries in the RV backfeed into the tow vehicle. when I turn off the car and remove the key, the vent fans are...
Componenets Needed to Wire 7-Way Blade and a 4-Pole Round Trailer Connector
I have a modified 1980 Toyota Landcruiser with a 6cyl, 4.2l diesel under the hood. Im having a new rear bumper made and have the chance to add trailer wiring. Vehicle came OEM with military style pintle and Im adding a 2 receiver Most modern...
Curt Adjustable Channel Mount Options for Lunette Ring C48660
Will this ring fit the Curt Channel Adjustable hitch? | Yes, there are actually 2 Curt channel brackets you can use with lunette ring # C48660. There is a 5-position option, # C48650, and a 3-position option, # C48610. For hardware use # C48620....
Availability of Custom Towing Mirrors for 1996 Toyota Land Cruiser
1996 Toyoto Land Cruiserwill your product fit? thanks | I would recommend either the K-Source Universal Clip-On mirror, part # KS3891 or the Cipa Deluxe Door Mount Mirror, part # 11650. The mirrors are sold individually, and can be used on either...
Fit of Thule Canyon on 2013 Toyota Land Cruiser
I Just purchased your Thule Canyon. I should have asked this first before I bought it but I did some research and found that this might be the best fit for my vehicle. Please can you confirm I was correct. I have factory roof racks with...
Can the Lock Core on the Rhino-Rack Cable Core Lockdown Be Replaced
I have the Rhino Rack HD Cable Core Lockdown #43208 and I need a new barrel lock with key. Which model replacement do I need to buy? Thanks | Are you wanting to buy a new lock/key to replace the one you have now on your Cable Core Lockdown...
Where is Connector to Install the Curt Wiring Harness part # C55365 on a 1999 Toyota Land Cruiser
I cannot find a connector to plug into on my 1999 landcruiser. There is a wiring harness already there but it seems to run up the truck towards the drivers side tail light but It seems to have no power. Any ideas on how to install the new part?...
Why Do Rods Longer than 7 Feet Need to Get Broken Down with Yakima ReelDeal
Why must fishing rods longer than 7foot be broken down? | Hey Dave, the Yakima Rod Carrier part # Y04089 does require that rods longer than 7 feet need to get broken down. This is a cautionary statement due to the flex of rods on that forward...
Filter Your Search
Contact and Help