Which Roof Mounted Ski and Snowboard Carriers Will Fit a 1998 Chevy Tahoe with Factory Roof Rack
Which Yakima Vertical Mighty Mounts for ski racks will fit the factory cross bars on a 1998 Chevrolet Tahoe. | According to Yakima, with factory crossbars on your 1998 Chevy Tahoe, you need to use Universal MightyMounts for Yakima Ski Mounts,...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Installing a Brake Controller in a 2002 Holiday Rambler Endeavor
I have a 2002 Holiday Endeavor. I am wondering what wiring harness I would need to install a Brake Controller, and where would I find the plug to plug into on my motorhome. | A brake controller is going to need to be hardwired into your 2002...
Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
Do Nev-R-Lube Trailer Bearings Need Maintenance
Need to know how to check brakes on my nev-r-lube axle and when those bearings need to be replaced. | The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would...
Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE
I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....
Does Curt Trailer Wiring Kit for 2007 Mitsubishi Endeavor Work with LED Trailer Taillights
I have a 2007 Mitsubishi Endeavor AWD. I purchase a new trailer with LED lights on it. The plug works ok when plugged in to a trailer with regular lights but does not work when plugged in to the new trailer plug that has LED. Does your wiring...
What Size Hole Is Needed For Installation Of Optronics Flush Mount 4 Inch Round Light # STL23R-24B
I would like to install these flush mount tail lights and need to know the diameter of the hole. Will a 4 hole saw provided the needed holes size or does it need to be slightly larger? My application was previously surface mount lights but I...
Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
2006 NuWa Discover America Landing Gear Replacement Motor
My Fifth wheel is raising and lowering very slowly. Not sure if this is a gearbox or motor problem? Current motor is an Atwood Mobile MPD71113 which I am seeing has been discontinued. Please provide replacement part numbers or compatible landing...
Can Roof Rack Cargo Bag, # HE3021 Be Installed Directly on the Roof of a 2004 Mitsubishi Endeavor
Question about this cargo bag item #HE3021: Does the bag come in different optional colors? Since it has a rubber bottom, can it be placed directly on the SUV roof between the the 2 roof rack bars without causing damages to the car roof?...
Where is the Trailer Wiring Connection Point for a 2007 Mitsubishi Endeavor
I would like to know exactly where the electrical connection is made. I dont see any wires inside the area around the spare tire and there are very few wires with access undr the rear of the vehicle. | The connection point for the Curt Wiring...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
Wiring Harness for a 2007 Mitsubishi Endeavor
I have a 2007 Mitsubishi Endeavor, and I need a wireing harness, what is the difference between a non-powered system and powered system. Will this one work on my car? | Since 07 Endeavors did not come with a tow package, you will need to hardwire...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily
Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...
Installing Hopkins Wireless Backup Camera HM50002 in 2005 Mitsubishi Endeavor
I have an 2005 mitsubishi endovor can I install this unit | The Hopkins Smart Hitch Backup Camera # HM50002 will plug in on any vehicle that has a 7-way trailer socket with a round U.S. Car plug-in connector at the rear. The photo I linked...
Hitch and Wiring Install Instructions for a 2011 Mitsubishi Endeavor
do you have a video on connecting the trailer wiring kit on 2011 Mitsubishi Endeavor. | The recommended trailer wiring harness for your 2011 Mitsubishi Endeavor is the Curt Harness part # C56039. We have not had the chance to install this harness...
Brake Controller and 7-Way Recommendation for a 2004 Mitsubishi Endeavor
I emailed quite some time ago about which parts are needed to install a brake controller and 7-pin wiring harness on my 2004 Mitsubishi Endeavor Limited. The vehicle came with the towing package and am currently towing with my 4 pin that came...
Do I Need To Lower My Muffler To Install This Hitch?
I have a 2008 Mitsubishi Endeavor I want to put a hitch on it but my muffler is directly or almost directly blocking one of the hose for the hitch do I reroute my exhaust or do you make a hitch that goes around it what to do | Hello, We have...
Recommended Trailer Brake Controller For 2004 Mitsubishi Endeavor
Do you have an instructional video on installation of trailer brake controller on 2004. Mitsubishi endevor | I have included a video of a trailer brake controller being installed in a different vehicle, but we have not had the chance to install...
Hitch and Wiring Installation on 2008 Mitsubishi Endeavor
trailer hitch instalation and wiring harness | For the 2008 Mitsubishi Endeavor, I would recommend the Curt Class 3 receiver hitch, part # 13113. To provide lighting for your trailer, we recommend the 4 Pole Harness and Hardwire Kit, part #...
Filter Your Search
Contact and Help