EZ Connector Trailer Connector for 2016 Toyota Tundra Crew Cab 4WD
Will this part be plug and play for my 2016 Toyota Tundra. I am planning on leaving my factory installed 7 way/4 way plug in place and add the EZ connector below my rear bumper. Do you know if the factory towing harness can be unplugged from...
Recommended Tailgate Lift Assist for a Bix Tex 70TV Trailer
Hi, what would be the trailer ramp assist that I would need for the Big Tex 70TV 7x16? The sides are a bit taller than most... 29inch 3/8 height I believe. | The best trailer tailgate/ramp assist we have for your Bix Tex 70TV Trailer is the...
Magnetic Trailer Connector Adapters For 7-Way and 4-Way Trailer Connectors
I am thinking of replacing my 7 pin connector on my 2005 F350 Super Duty with the EZ-Connector magnetic. Do you stock a seven pin adaptor to fit the magnetic connector so if I use another trailer with 7 pin Ill have the adaptor. | Yes, we have...
Will the Gorilla-Lift Utility Trailer Tailgate Lift Assist Work with 9-1/2 Tall Side Rails
Can I use the Gorilla lift assist on a trailer with the rail only 9 1/2 inches from the floor with a 4 foot ramp. Or is there another option to use? This is a 5x10 trailer.Flat rail. | The Gorilla-Lift Utility Trailer Tailgate Lift Assist part...
Determining The Correct Trailer Tailgate Lift Assist For Your Trailer
6 x 10 trailer to haul Polaris side by side what size gate lift should I get? | The right gate lift assist is really going to depend on the weight of the trailer gate so you'd need to know how much it weighs to determine the correct lift assist....
Converting 4-Pole Wiring to 7-Way Format on 2008 Ford F-150
I cannot seem to laocate what I need from Ford Curt, Hopkins, tech?? I have a factory 4 way that is connected through a rectangular connector that also provides tail lights, brake lights etc. I need to install a 7 way for brakes. The truck...
Is the EZ Connector Magnetic 7-Way Trailer Connector Offered With a Longer Harness
Hi, Im looking at Item # 319-R7-05. Under the EZ Connector Wiring section of the product info, 0-5 feet long is stated, but under specs the length of the product is listed as 2 feet. Is this product available in a 5 foot length? Thank you. |...
How to Find the USCAR Connector on a 2018 Toyota Land Cruiser
Good day: I have a Toyota Land Cruiser 2018 and I want to install a harness for the trailer lights. As I see the part number Item # 319-R7-02 is the one that works. But to be honest I dont find where to connect the two plugs the harness has....
Comparison Between Rack'Em Double Barrel and Gorilla-Lift Tailgate Lift Assist Systems
I have a large goose neck utility trailer with a large and very heavy gate that is 7foot wide X 5foot tall with lots of thick angle iron and square iron. The gate already has two coil springs attached similar to your RR16933 springs but is...
Does the EZ Connector Magnetic 14-Pin Trailer Connector Have a Twist Lock Also
We change large Dies out of our presses and we use 12 pin cables that we connect by screwing them onto DIe. We were thinking we could use your product to eliminate the problem we have with Operators forgetting to unplug Die cable and it getting...
Weight Capacity of Gorilla-Lift Utility Trailer Tailgate Lift Assist
What is the rating of the springs that come with Gorilla Lift? Are they 90#, 110# or more? Can I order heavier springs? | The Gorilla-Lift Utility Trailer Tailgate Lift Assist part # GL1 is designed for tailgates no more than 300 lbs. There...
Can Gorilla-Lift Tailgate Lift Assist be Used on Folding Trailer Ramp
This device would however aid in raising the folded ramp in either its folded state or when it was lifted as an extended unit? It would have to attach to the first section of the ramp which is half way down the entire length of the ramp. What...
How to Adjust a Gorilla Lift Utility Trailer That Has Too Much Tension
To much tension on the cables on my gorilla lift can’t pull gate down | It sounds like the tension on your Gorilla-Lift Utility Trailer Tailgate Lift Assist w/ Cable # GL1 is too high. To lower it, you're going to need to: 1.Lower the point...
What All is Needed to Add an EZ Connector to a 2012 Expedition and Trailer?
Vehicle- 2012 Ford Expedition EL Trailer- 2010 Interstate 16 foot enclosed I currently have the Adapter 4-Pole to 7-Pole and 4-Pole - 37185inch installed. I want to convert my 16 foot enclosed trailer and vehicle to the EZ Connector Magnetic...
Which Magnetic 7-way Connector Harness Is Correct For 2014 Toyota Tacoma
Which EZ Connector Magnetic 7 way should I get? 319-R7-02 319-R7-02D | Thanks for the pictures! Since your 2014 Toyota Tacoma has a 7-way connector that is hardwired in you will need to cut the wires from the factory connector and hardwire...
What is the Height of EZ Connector Pogo Trailer Cable Holder
Can you tell me how tall this is? | The EZ Connector Pogo Trailer Cable Holder # 319-TCP011602 is 18" tall. This features a bolt-on installation and will keep your trailer cable off the ground. |
Recommended Tailgate Assist for a 3 Foot Tall Tailgate
Looking for a trailer ramp lift assist . My trailer only has 3ft tall ramp but very heavy all square tubing frame . Anything work on 3ft height ? | The only tailgate assist we have that will work with a trailer that has a 3' or 36" tall tailgate...
Replacement Spring and Cable Recommendation for a Gorilla Lift GL1
I will be purchasing your replacement spring and cable. Can you refresh my memory on how to replace they assembly? Thanks? | The correct replacement spring and cable you would want for your Gorilla Lift part # GL1 is the part # GSCC-400. There...
Solution for Replacing OEM 7-Way With EZ Connector on 2020 Toyota Tundra
I have a 2020 Tundra with the factory tow package and factory tow connector with an integrated factory brake controller. My current connector on my truck is the 7 pin blade style with the 4 pin connector integrated next to the 7 pin/blade connector....
Availability of Watertight 7-Way Trailer Wiring Connector
do you offer a 7 way round pin super sealed as well? | We do offer a watertight 7-way trailer connector setup with the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal # 319-R7-02 which installs in place of a standard trailer...
Does EZ Connector 7-Way Require Adapter to Install in 2015 Toyota Tacoma
Is there an adapter kit required to install the EZ Connector on a 2015 Toyota Tacoma? I plan to drill a hole in the bump by the license plate light currently located under the rear bumper. | The EZ Connector Magnetic 7-Way Trailer Connector...
How Long Is Each Tube On The Gorilla-Lift Utility Trailer Tailgate Lift Assist # GL1?
How long are each of the 4 housings so I can check the fit on my 8foot trailer? Thanks | The Gorilla-Lift Utility Trailer Tailgate Lift Assist # GL1 has the 2 assemblies which each are going to be 6' long by 2" wide and 2" tall. Each section...
Gorilla-Lift Utility Trailer Tailgate Lift Assist - Is The 300 lb Capacity For 1 Piece or 2?
Is the weight capacity of 300lbs for one gorilla lift or 2? | The Gorilla-Lift Utility Trailer Tailgate Lift Assist # GL1 comes with 2 pieces and both pieces combine for a 300 lb capacity. |
Can Single Tailgate Lift Assist be Purchased Instead of Gorilla Lift GL1 that Comes as a Set
Can I purchase a single GL1 instead of a set of two? | If you happen to already have the Gorilla Lift Utility Trailer Tailgate Lift Assist, GL1, and one side is in need of repair, we have replacement parts available. We offer the Replacement...
Filter Your Search
Contact and Help