!V70  x   >   !Packard  x   >   SeeLeveL  x   >  

I am looking to put in the replacement holding tank sensor system. I have a a 2022 Alliance RV Paradigm 5th wheel 35 ft. Which sensor system should I get? | This really depends on if your 2022 Alliance Paradigm has an RV-C, multiplex wiring...

Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help. | Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump...

Looking for a meter to tell how much water we have consumed in our RV. We are dry camping and need to conserve the water in our fresh tank. The sensors in the RV are simply 3 lights. I would love to have something that shows gallons consumed,...

Im looking at the Seelevel sensor mounting on my water tank. Is this suitable for a tank mounted underneath the van? Thanks. SeeLeveL SE27VR | Yes, the SeeLeveL Sensors # SE27VR can be used on a tank mounted under a van. You'll just want to...

The sea level sensor would it work with a standard monitor that has readouts by the 1/3 or do I need to add or replace my present monitor? Thank you | The SeeLevel systems will require you to replace your current monitor in order to properly...

Can SeeLevel sensor be used th Simarine Pico tank monitor | Mike, unfortunately not. The SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE34VR, so it's not going to work...

Hey, does this show the percentage always, or does the screen go black when you arent using it? Constantly trying to reduce lights in the van, so Id prefer it wasnt always lit | The SeeLeveL RV Holding Tank Monitor # SE94VR shuts off after just...

Will the sensors work on a fiberglass holding tank? If not, can you recommend a sensor that does? | Yes, the SeeLeveL RV Holding Tank Monitoring System # SE39VR will work with a fiberglass holding tank. If you check out the linked installation...

Do you carry the 701AR and 701ES2 sensors | We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor...

Looking for 2ea potable water tanks. 60 length x 36 across x 6 depth. With sensors installed. 03 25 Tahoe Toy hauler by Thor | The closest match we have for what you're looking for is the Valterra RV Water Tank part # R8060 which measures 60"...

See level monitor kit. I have a cedar creek with fresh, galley, bath, and black tanks. Do they make a kit for monitoring 4 tanks, that are labeled on the monitor correctly for this? Thanks | We do have the SeeLeveL RV Holding Tank Monitor...

Does etrailer install the SeeLevel products? I have a 2017 Renegade Valencia 35MB. | Yes we do carry the SeeLevel brand of tank sensors and monitors. If you check out the link I attached to this page you'll see all of the options we offer. |

Replacement tank sensors : Do you know of an external holding tank sensor that is compatible with the Lippert inCommand display panel? I am hoping to cut the wires to the internal sensor and jump the replacement external sensor to the existing...

Concerning See Level sensors, have you tested sticking the full sensor strip on a diagonal to a shorter tank. If it works it will show a finer reading using more of the graduations. Like laying a 12inch ruler slanted on a 1x4 board, if you mark...

Is this available in a kit with the sensors or do I have to get those separately? | Yes, to get the SeeLeveL RV Holding Tank Monitor # SE34VR with the sensors you need the SeeLeveL RV Holding Tank Monitoring System # SE59VR. This comes with...

Can this sensor be used in fresh and black water on marine/boats? Bayliner? | Yes, the SeeLevel part # SE78VR can be used on the water tanks of a boat as well. |

I have a 98 class A Georgie Boy Cruise Master on a Freightliner chassis with holding tanks that have wired sensors into the tanks all displaying on the range hood. Does anyone make a replacement sensor that is non-immersive and will wire into...

I am trying to connect this and have no wiring diagram. I have created my own of what I did, and it’s not working. Do you have a wiring diagram for this? I bought it from etrailer a couple of years ago and have never been able to get it to work....

Does sea level make a monitor that is for freshwater tank only, do not need water pump switch or to monitor gray or black tanks | Hey Kent, so we don't have a version of the SeeLevel that has just a freshwater tank monitor but you could use...

I have a 2022 Entegra Esteem 29V. It has three Probes in each tank and monitors in thirds of the fresh, gray and black tanks along with Coach batteries and a pump switch. I have continual trouble with the black sensors and have to use tank flush....

i have a 43 Defever trawler boat. i have 2 150 gal freshwater tanks, about 36 inch tall. can you stack sensors more than 2 high? will the sensors work on steel diesel tanks? | The SeeLeveL sensors can be stacked 2 high at the most, like what...

Can SeeLevel sensors be used on external mounted tanks that exposed to water and all road dirt? | Yes, the Seelevel sensors like the part # SE78VR can be used on external mounted tanks exposed to water and roads like you asked about. |

What is the output voltage on the sensors? | The SeeLevel Sensor part # SE27VR that you referenced runs on 12 volts. |

SEELEVEL SENSORS 710-AR When stacking the sensors do you have to cut the tab on both sensors or just one? | Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long # SE88VR you just cut the top...