!V70  x   >   !Vesta  x   >   Blaylock Industries  x   >  

Compatible padlock - Will your shrouded padlock fit this? | There is a padlock that is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50, but if you were referring to the Master Lock Shrouded Padlock # 37DAT, it will not...

I was looking at purchasing some locking lug nuts, but dont want a unique key for each axle! I have a tripple axle trailer with a spare tire 7 locking nuts needed Is it possible to get 7 locking nuts and 2 or 3 keys and have all 7 nuts be...

I bought the TL-55 Coupler Lock and it doesnt fit. How do I know the correct one to buy? Im thinking maybe TL-55. Im attaching photos of my hitch. | We have BlayLock coupler locks designed for Bulldog couplers, but they are not the style that...

what is the maximum width the hitch can accommodate? i see that it is 6 1/4inch wide overall, what is that inside dimension? Thanks | I pulled the Blaylock EZ Lock Coupler Lock, # BLTL-33, from our warehouse and took some measurements for you....

Since this is made out of aluminum which is the softest metal it seems like it could easily be sawed thru. | The Blaylock EZ Lock Coupler Lock part # BLTL-38 is indeed made of aluminum which is a softer metal. However, if a would be thief has...

Im sure you get this question often, but .....What is the best coupler lock for a 2inch sleeve style coupler that will fit good and tight. Made totally of steel, preferably tool steel not aluminum or pot metal ? I ve tried the Fastway and Trimax...

have a PJ gooseneck trailer and has a bulldog name on the neck. will this BLTL 55-40D work? cant find the bulldog name under this lock but its listed on some of the other style. nothing about if its for a 2 5/16 | Since you have a Bulldog gooseneck...

I am looking for a very very good coupler lock. I noticed you had the AMPLOCK underslug lock. What I have is a Titan 10 coupler, 2 5/16 inches. I am trying to find the best lock for that coupler. I also looked at the AMPLOCK, which is...

We purchased a Baylock btlt 50 lock. And have lost the pin. can that be purchased separately? | Yes, you would want the Replacement Clevis Pin # BL040CPIN-TL3350 to replace the pin of your Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50. |

What is the country of origin? Is it communist China ? | The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK you were looking at is proudly made in the USA. |

Am trying to determine if the BLTL-50-40D will fit the gooseneck coupler in the photos below as there are no brand markings on the coupler. It does have a football shaped base plate that is 7.5-7.75inch long. | Thanks for the pictures of your...

Will the Blaylock TL 33 lock work on my Demco 13203-95 coupler with the EZ Latch mechanism? What is the diameter of the hole for the padlock on the 3/4 inch pin? | Yes, the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33 that you referenced...

Will a Master Lock Hidden Shackle Padlock work with the pin? | Yes the Master Lock Stainless Steel Padlock # ML40D is compatible with the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33. I attached a picture that shows both of these products...

What is the minimum clearance you need between the ground and the frame ? | Sounds like you may be asking about what the minimum clearance would be for the Blaylock EZ Jack and Wheel Chock # EZ-JACK to fit under a frame or fender. The height...

I am interested in purchasing 2 BLDL-80 locks in the future. I see there is a keyed alike option available. How do I go about ordering from trailer with the keyed alike option? I did not see an option when I added to cart. | On the main product...

I have a triple axle toy hauler with a weight of 11,000 what jack should I get for a tire change? | There are a couple options that may interest you. One very popular option is the Blaylock EZ Jack # EZ-JACK. This is a wedge-style jack. Basically...

I have a Bulldog BX1 coupler on my trailer. Can you tell me if the lock will work properly? | The Bulldog BX1 gooseneck couplers have that handle assembly at the bottom so the lock that would fit at the bottom of the coupler in lock set # BLTL-53-40D2...

Hi, Im wondering if you can tell the difference between a Blaylock TL-20 and a TL-33? Is one smaller than the other? I have a 2022 Alcom SnoPro Hybrid trailer with a 2 coupler. Thanks | Sure thing! The EZ Lock Trailer Coupler Lock # BLTL-20...

I am towing a uhaul trailer cross country, and I found out all their trailers use a handwheel latch for securing the trailer coupler to the hitch ball. Im interested in security measures available to keep anyone from being able to unscrew the...

Do you know if this lock will fit the Demco Trailer Coupler - Flat Plate Mount - eZ-Latch - Black - 2-5/16inch Ball - 21,000 lbs, Item # DM69FR ?? If not do you sell one that does? I am not wanting just a locking pin. Thanks | I have another...

Hi! I would like to purchase a wheel lock thats weather resistant and easy to install. I have a small trailer with 235/80R16 tires picture attached. Both the Blaylock and etrailer products seems like good choices. Would these fit my tire and...

can a scissor stabilization jack be placed under the center point with light pressure for camp set up stability? can I place a jack under the center point to jack the trailer for wheel bearing inspection? I have a 28foot 5th wheel dry weight...

Being that the frame work of this lock is made of Alum a thief could easily cut thru the bar holes or cut off below the bar holes. I would be more comfortable is the whole unit was SS and not part Alum. Im looking for a very good hitch lock...

Can a 7/16 shackle fit through the hole? All my locks I have a master key to are 7/16 shackles and I dont want to purchase new locks with different key | It might be a little bit tight but a lock with a pin diameter of 7/16 inch would fit the...