Padlock Compatible with Blaylock EZ Lock Gooseneck Coupler Lock

Question

Question:

Compatible padlock - Will your shrouded padlock fit this?

asked by: Pam W

0

Expert Reply:

There is a padlock that is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50, but if you were referring to the Master Lock Shrouded Padlock # 37DAT, it will not fit because the Coupler Lock has a 3/8 inch diameter hole for the padlock to fit and the Shrouded Padlock fits openings of 1/2 inch diameter or larger.

The padlock which is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50 is the Master Lock Stainless Steel Padlock with Shielded Shackle # ML40D which is made of stainless steel and is a perfect fit with its 3/8 inch diameter shackle.

I have added links to video reviews of both the coupler lock and padlock for you to check out as well.

expert reply by: Kyle S

0

Answer 1

If you are looking for a white spare tire cover then we do have the Classic Accessories #052963751703 which fits tires that have a 31" - 31-3/4" diameter. Since your tire size of 235/80-16 has a 30.8" diameter I am not sure how well…

view full answer...

Answer 2

Thank you for the photo of your coupler. When choosing a lock for the coupler it makes it much easier if you are able to identify the coupler manufacturer. The Blaylock EZ Lock Gooseneck Coupler Lock, part #BLTL-55-40D is designed to fit RAM…

view full answer...

Answer 3

Yes, the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 that you referenced does fit the Demco Channel Tongue Trailer Coupler #DM13203-95 that you referenced. The max diameter shackle you could fit through the hole on the 3/4 inch long pin is 3/8 of…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Padlock Compatible with Blaylock EZ Lock Gooseneck Coupler Lock

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching