!Stampede Travel Trailer  x   >   !Pleasure-Way  x   >   !Street Glide CVO  x   >   Mount-n-Lock  x   >  

The images associated with this product shows it comes with Mount n Lock Safety Struts, but I dont see them listed in the product description. Does this cargo rack come with the Safety Struts, or would they need to be purchased separately?...

Can this be mounted on my trailer tongue? Regards, | I guess if your trailer tongue is 4", 4-1/2", or 6" squared then the Mount-n-Lock GennyGo Generator and Cargo Carrier # MNT77FR could technically fit, but this was designed and tested for...

I have and IBeam that is 1” wide I need to extend for these to work Which one of these is what I need to accomplish this | The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets item # MO22FR you were looking at will mount to an I-Beam...

What do you recommend to install on the back of a bumper less rv to allow a 2 bike bike rack? | With your RV not having a rear bumper you will have a couple options and I recommend collaborating with the trailer manufacturer to determine which...

My bumper is 4.5inch x 4.5inch with very little clearance at bumper/trailer ..... solutions? Thanks | For your 4.5 Inch bumper with little clearance, the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs # MNT54FR...

May North Trail FSB22 indicates that I should not put anything on the bumper. Will this hitch work or just destroy the bumper? Thx | The brackets which hold the rear bumper to the trailer frame are not always up to the task of hauling extra...

Looking for rack 30 inch wide. Need width yo haul an electric trike | For a 30" depth you would need to mount multiple Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT34FR side by side and just leave the sidewall pieces...

Hello, I am looking for a cargo carrier for back of an rv. I see you have a 24” x 60”. Do you happen to sell one 56” x 90”? Or any suggestions? | It looks like you were looking at the bumper mount cargo carrier options for your RV. The 24"x84"...

The pictures of the 24x60 Cargo carrier for the rear bumper shows two bumper support brackets being supplied with the kit. Not the brackets used to install the basket to the bumper but brackets that beef up the bumper to frame. Are these supplied...

Will one set of the struts be sufficient or is two sets recommended , one to go on on each side of the frame rail? Or just singularly to just one side of the frame rail? To support the bumper. | It's possible to use two sets of the Mount-n-Lock...

Can you carry a 50cc Honda metropolitan scooter on a cycle carrier using Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4 to 4-1/2 on the back bumper of a pull behind travel trailer | Yes, you should have no problem carrying...

Im looking at your 24x64 rear bumper rack and apparently its actually a 40 kit and 24 extention kit. Can you provide a detailed parts list for the 64 package and does it include the e-trailer L brackets and hardware to support the bumper to...

Please note my 2015 Keystone Laredo 5th Wheel model 335TGs rear bumper is only rated for 150 lbs. How do i mount this Cargo Carrier with a capacity of 500 lbs to bumper to ensure the bumper does not break away / fall off while in transport?...

Will this work with a Saris SuperClamp EX Bike Rack for 2 Bikes - 1-1/4inch and 2inch Hitches - Wheel Mount? Will it mount to a to mount it on the rear bumper of a 2022 JAYCO JAY FLIGHT SLX 195RB? The combined weight of the bike rack and the...

I would like to use this on a 2022 JAYCO JAY FLIGHT SLX 195RB This may be an odd question, but does this lock to your bumper so someone can’t unbolt it, and steal your bike rack and bikes on it? I have a 2022 Jayco Jay Flight SLX 195RB. Is the...

Can I bolt my generator straight to the support arms instead of buying the bascket? I believe it will provide the shear value they need with three bolts per arm | I checked with my rep at BetterBilt Solutions, the company that owns Mount-N-Lock....

I was thinking of buying this to use as a stand alone platform to carry a small inverter generator. Would you recommend this and if so what is the weight limit on this item? The generator is 60 lbs and the rv bumper is rated for 200 lbs. thank...

Bumper is welded to the frame do I need to use the bolt on bumper supports. To carry my gas and generator? I am referring to your 24x60 bumper mt carrier | Since your bumper is welded to the frame, it should be very strong and likely won't...

What is the metal thickness of this bumper? My current 4” bumper is 3/32” thick and the sewer hose connections barely fit. Assuming this 4” bumper is thicker, creating a smaller ID, I’m concerned my hose won’t fit. | When it comes to The Mount-n-Lock...

I have a 2017 r pod that I would like to install a fold down storage rack. Also, can. Buy an aluminum storage instead of steel? An aluminum tubing 2” x 4” slides inside the r pods steel frame. Thanks | We have a couple of aluminum storage...

Will this hold a Electric E bike up inside travel trailer? The bike weighs 70 lbs with battery inserted | The Feedback Sports RAKK XL Bike Floor Stand - Black # 301-17345 doesn't have a weight capacity so it will hold an electric E-Bike up inside...

I have a 2023 Grand Design Transcend, 247BH. I want to install the Mount-n-Lock Safety Struts for Standard Bumper. I want to make sure Im looking at this correctly as it would seem it is only as strong as the weakest weld. The bumper is butt...

I am planning a suspension up grade to our 2017 grand design, reflection 29RS. The Lippert axel states 5200#. It currently has 4 leaf, leaf springs. I would like to up grade a little to reduce some of the road bouncing. Would a 5 or 6 leaf...

If you fill your camper bumper w/spray foam would it be stronger? | No, just adding in spray foam will not increase the capacity of the bumper in order to hold the 24x64 etrailer Cargo Carrier # e83YR. The main figure for an RV bumper's capacity...