Recommended Electric Cooling Fan for 1970 Ford Mustang with Cleveland 351 Engine
I have a 1970 mustang with a 351 Cleveland engine! Have had a heating problem forever!Runs about 215-220 temp when sitting still in the summer! What do u have to help me with that? | The Flex-a-lite 15" Black Magic # FLX160 is the best available...
Dimensions of Curt Trailer Hitch Receiver 13900
Can you tell me what the measurement is from the bottom of the vehicle frame to the top of the cross tube and from the bottom of the frame to the top of the receiver tube? Seeing if this will work on my 1963 Dodge D100. | The Curt Trailer Hitch...
What is the Height of the SumoSprings Solo Custom Helper Springs # SSR-610-40
what is the overall height of the sumo bump stops? | The overall height of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40 is 6 inches. These springs have a weight capacity of 1,000 lbs at 50-percent compression and are made...
Should the Coils Be Removed to Install the AirLift 1000 Drag Bags # AL60844
Hello! I purchased airlift part number 60844 for my 1970 Buick Skylark. I am replacing the Buicks original springs with new front and rear coil springs and have a similar question: do the coil springs need to be removed before the airlift is...
15 Wheels Availability With a 5 on 5-1/2 Bolt Pattern And Largest Compatible Tire
I am looking for a 15X6 rim with a 5.5X5 bolt pattern for an old stock trailer. I can seem to find one on your site. Can you help me out? Thanks | The Vesper Steel Modular Trailer Wheel # TA37RR is the only 15" wheel we carry that have...
Recommendation for Timbren Rear Suspension Enhancement for a 1970 GMC C-10 Pickup Truck
Timbren REAR kit for 1970 GMC 1/2 ton w/ leaf springs | The correct Timbren rear suspension for your 1970 GMC C-10 is Timbren Rear Suspension Enhancement System, # TGMRC10A, that you have referenced. I have included a link to the installation...
Trailer Hitch and Wiring for a 1970 Ford F-100 Styleside with Standard Bumper
Can you provide some additional info on receiver hitch options that allow the retention of the factory spare tire location under the bed? I have the long styleside bed with standard step bumper. | Modification and/or relocation of the spare...
Class V Trailer Hitch Availability For A 1970 Ford F-250
Looking for a 15800 Curt tow package for my 1970 f 250 pichup | I do have some solutions for your 1970 Ford F-250, however, the Curt Trailer Hitch Receiver # C15800 you reference is not a fit for your truck. If your vehicle has the deepdrop...
How Does Redarc Tow-Pro Elite Controller Know How Much Brake Power to Apply
I am thinking about ordering the Redarc Tow-Pro Elite Trailer Brake Controller for my 1970 chevy c30 with hydroboost and disk brake conversion. I am looking a buying a gooseneck trailer. In the video it says it will apply the trailer brakes...
Determining Which Size Screws Should Be Used To Install Tow-Rax Strap Hanger TWSP25SHA
what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer? | The Tow-Rax...
Trailer Hitch Recommendation for a 1970 Chevy C10 with Step Bumper
Hello, im looking for a hitch for my 1970 chevy c10 pickup, with a 8ft bed, and a factory step bumper. Spare tire is mounted under rear of the bed. 500lb tongue and 5000lb trailer being pulled with a weight distribution hitch. | The Class...
Replacement Axle Solution for Camper with Bearing Numbers M12649 and LM48548
I have a makeshift trailer that I believe was made from a 1970 Impala. The bearings are M12649 and LM48548. Do you have replacement hubs that will fit a spindle that uses those bearings? | Unfortunately, we don't carry any replacement hubs that...
Which Mount Is Required For Opti-Brite LED RV Dome Light ILL29CB?
Need item # and price for mount on light ILL29CB and a picture | The Opti-Brite LED RV Dome Light - 500 Lumens - Grommet Mount - 4" Round - Clear Lens # ILL29CB you were looking at gets mounted in a 4" round grommet # A45GB. This will require...
Materials Used in Bestop Trailmax II Fold & Tumble Fabric Bench Seat B3944137
Hello, I wanted to know if the fabric option of this seat is all fabric or a mix of both fabric and vinyl? I cant tell for sure from the photos If it is a mix, what part of the seat is vinyl? Thanks for your time. | The Bestop TrailMax II...
Tonneau Cover to Fit 1970 Chevrolet El Camino
do you have correct fitting tonneau for my 70 chev el camino | As a matter of fact we do. The Craftec Hatch-Style Tonneau Cover # 252198 is confirmed to fit your 1970 Chevrolet El Camino. This tonneau cover has a light aluminum frame and gas...
What Are Dimensions of Spacer Tubes Included in Reese Super Titan Hitch # 38208
What are the dimensions of the spacer tubes? | According to my contact at Reese the four spacer tubes included with their Super Titan 4000 Trailer Hitch # 38208 measure 15-inches in overall length and have a cross section that is 3-1/2 x 3-1/2-inches....
How Large Of a Mounting Hole Is Needed For the Backup Light w/ Chrome Housing # BU11CS?
What is the diameter of the light socket mounting stud? It appears that a drilling is required for the mounting surface. Is a bulb light included? Can an amber colored be used and what is the bulb specification? Thanks. | To install the Backup...
Recommended Chrome Rear Bumper for a 1970 Chevy C10
1970 c 10 chevy step side rear crome bumper and brackets | The Westin Fey Diamondstep Rear Bumper part # 21000 is recommended for a 1970 Chevrolet C10. It does not however come with brackets as there are not any for this application but you...
Trailer Hitch Receiver Recommendation for 1970 Chevrolet Chevelle
Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...
Dimensions of Derale 26 Inch Dual High-Output Electric Radiator Fan-and-Shroud Assembly # D16927
Is the 26 x18 dimension the core size or the overall size including the tanks? What size radiator is recommended that this unit will fit? The D16927 unit is the one Im interested in for my 1970 Nova with 500 cu in Big block. Am willing to...
RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide
I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...
What is the Width Between The Mounting Plates On The Leveling Scissor Jack # JSC-24-IND?
What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |
Comparing Proportional and Time-Delayed Trailer Brake Controllers
I also tow small trailers, as well as a 12,400lb camper. Should I get a time delay controller? | In regards to choosing an electric trailer brake controller, you have proportional and time-delayed options. The best option would be a proportional...
Are Small Plates of the Westin Fey Diamondstep Bumper Needed to Install on 1970 Ford F-100
What does the small plate that came in the assembly box go? We are having trouble understanding the instructions that came in the box. Thank you | I spoke to my contact at Westin and he informed me that the smaller plates you are referring...
Filter Your Search
Contact and Help