Replacement Tarp for Extang Fulltilt that Fits 1987 Ford F-150 Long Bed
will this tarp fit a 1987 f150 with a 8 ft. bed? | The correct replacement tarp for an Extang Fulltilt tonneau that fits a 1987 Ford F-150 with an 8 foot bed is the part # EX37515 since the tonneau cover you have is the EX38515. |
Recommended Chrome Rear Bumper for a 1988 Ford F-250
Hi I have a 1988 custom ford f250. I would like to purchase a chrome rear bumper. Will the bumper fit without the added purchase of brackets or must I purchase that as well. thanks | We have a chrome plated rear bumper that is a confirmed...
Where to Find Stoplight Circuit in a 1990 Ford Truck for Brake Controller Install
I bought a truck with a break controller installed but the previous owner said it did not work properly and caused problems with the antilock break system. I have looked online for a wiring diagram to correct the problem but have come up empty...
Parts Needed to Install Brake Controller in 1989 Ford F-350
this truck does not have any trailer brake controller or 7 way wiring- had some sort of hydraulic brake attachments- with hoses to the bed I need kit s to install 7 way in bed for goose neck trailer, and trailer brake controller. I...
Will the Derale Radiator Race Fan # D17420 Replace the Factory Fan in a 1988 Ford F-250
88 F-250 460CID IS THIS THE CORRECT REPLACEMENT FAN FOR THIS TRUCK? DO YOU HAVE FAN SPACERS AVAILABLE AND HARDWARE? 3inch SPACE I BELEIVE.? FAN SHROUD HAS A 22inch OPENING. WATER PUMP IS ABOUT 5.5 INCHES FROM RADIATOR. I NEGLECTED TO...
5th Wheel Base Rails Needed to Mount in the Bed of a 1988 Ford F350 for a RBW Hitch
hi . i have a 1988 ford f350 and need lower rales to fit my r.b.w. fitheheel hitch . what do you offer for lower rails to fit wat i have ? THANKS | To install Curt base rails in the bed of your 1988 Ford F-350 you will need the Curt universal...
5th Wheel Trailer Hitch Installation Kit for a 1998 Ford F-250 and RBW Lil Rocker Hitch
have a15k lil rocker and no mounting kit it will go in a 1988 f250 can u tell me what kit i need | For a 1988 Ford F-250, short or long bed, you can use Reese installation kit # RP30035. The RBW Lil Rocker 5th wheel hitch will fit in the Reese...
Door Mounted Towing Mirror Recommendation for Towing Horse Trailer
I have a 1991 Ford f350 diesel crew cab. I tow a three horse living quarters horse trailer and cannot find suitable mirrors. They connect to the door. They are either to short so that you cannot see the trailer good enough or a shaking so...
Tools Needed to Install Draw-Tite Trailer Hitch 75038 on a 1988 Ford F-150
i need to make sure this hitch will fit and what is required to install , i am getting up in years. | The Draw-Tite trailer hitch # 75038 does fit a 1988 Ford F-150 with a standard or step bumper. I have included a link to a video to the right...
Solution for Trailer Brakes Pulsing with Hazards on 1991 Ford F-250
I have a Prodigy P2 in a 1991 Ford F-250. I when my hazards on, the trailer brakes pulse. I heard there is a rewiring fix for this problem. Can you advise? | In order to prevent the trailer brakes from pulsing with the hazards on your 1991 Ford...
Fifth Wheel Rails For 1991 Ford F-250 To use Reese 20K Fifth Wheel Hitch
What fifthwheel mount and rails do i need with a reese 20k hitch going on a 91 f350 with the 460 4x4 | The only rails available for the 1991 Ford F-250 to use the Reese 20K hitch part # RP30083 is the universal kit Reese Universal Base Rails...
Will Curt Lunette Ring C48560 Fit TorkLift Magnum Pintle Hook Mounting Plate # TLM9002
Will this pintle ring, fit this mounting plate? Magnum Pintle Hook Mounting Plate Adapter for TorkLift Adjustable Shank - 20,000 lbs Item # TLM9002 | I do have a great option for you, however the Curt Lunette Ring # C48560 that you referenced...
Our 1985 Ford Econoline 350 28 ft. Class C motorhome does not have stabilizing jacks. Im used to the stability of jacks from my days with a pop up camper. I crawled under the rear and found 2 V-shaped brackets welded to the frame. Could scissor...
Which Mounting Brackets for 1996 Ford F-150 to Install Westin Fey Diamondstep Bumper
What custom mounting kit do I need for a 1996 ford f150 | The correct mounting kit for a 1996 Ford F-150 to use with a Westin Fey Diamondstep Bumper like the # 71000 is the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe...
Fit of Westin 2000-92230 Diamondstep Rear Replacement Bumper w/Custom Install Kit on 1990 Ford F-150
how confident are you that a 20000-92230 will fit my 1990 Ford XLT-250 Lariat? Will it fit using your bumper kit that is supplied or should I expect to drill new holes? | I've confirmed with my Westin representative that their # 20000-92230...
Recommended 5th Wheel Bracket Kit for 1990 Ford F-250
I have a 1990 F-250. 8foot bed. With a power pull valley industries 5th wheel hitch. I also have the rails but I need the bracket kit to mount to the frame. Which one would work? | If you have the Reese Universal Base Rails # RP58058 then you...
Option to Install Trailer Wiring on 2000 International 3800
Hi I have a 2000 international 3800 school bus and I need to hook up trailer lights do you have something? Thank you. | While we don't have a custom fit trailer wiring kit that would fit your 2000 International 3800 you could use the part #...
Tailgate Lock For 1989 Ford F-250
Hello will this fit a 1989 F250 heavy duty 7.3 litre diesel | I spoke with my contact at Pop & Lock about your 1989 Ford F-250 and the tailgate lock, part # PAL9900. Unfortunately, this is not a fit for your truck tailgate. We do carry tailgate...
What is Material of K-Source Replacement Side Mirror KSH3661 Made Of
Are the mirror heads made of ABS or metal? | The mirror housing of the K-Source Replacement Side Mirror # KSH3661 that you mentioned is made of a plastic with a chrome finish. |
Solution for Front Mount Hitch on 1986 Ford F-150
do you have front hitch to fit 1986 ford f150 | The only option for a front hitch on your 1986 Ford F-150 is a universal hitch like the Draw-Tite # 41990-07. Unfortunately, nobody makes a custom fit front hitch for your truck. This is a Class...
Could Dexstar Trailer Wheel part # AM20761B Fit Hub Bore of 4.917 Inches
My Truck Pilot Diameter hub is 124.9mm 4.917 inch, I am looking at either Item # AM20761B 4.9 or Item # TA65VR 5.12. Does Item # AM20761B have too small a Pilot Diameter? is that 4.9inch rounded? Which item would fit best? | The part # TA65VR...
Recommended Wiring Installation of Prodigy P3 in 1987 Ford F-Series Truck
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional. 1987 Ford F-series truck. | The Tekonsha Prodigy P3 # 90195 is an excellent choice of controller. It has preset brake boost options and an easy to read LCD screen....
Receiver Hitch Recommendation for 1986 Ford F-150 with Step Bumper
Will the Curt 14001 fit a 1986 Ford F150 4 wheel drive with a step bumper ? Thanks . | The Curt Class IV Trailer Hitch Receiver, # 14001, is a confirmed fit for the 1986 Ford F-150 4-Wheel Drive with a standard or step bumper. This fully welded...
1987 F350 with 34 inch Frame Hitch Recommendation
I was looking at the curt hitch C15300 and it said it fit a 37.25, my truck has a 34.25 frame, do you have a hitch for this truck? | The 34 inch frame like what you have is typically found on the cab and chassis models of trucks. The hitch...
Filter Your Search
Contact and Help