How to Determine the Correct Leaf Spring Replacements for a 1975 Rolco Tandem Axle Boat Trailer
Looking for leaf springs. I have a 1975 Rolco tandem axle boat trailer with gross weight capacity of 3500 lbs. I need to replace all 4 double eye leaf springs. and will need bolts and shackles Cant seem to figure out an exact fit. The eye...
Type and Size Fastener to Attach ACQ Treated Deck Boards to Aluminum Trailer Frame
I have an aluminum trailer and would like to attach ACQ treated 3/4inch deck boards to the aluminum tube framed sides. What type/size do you recommend? Self tapping? Thank you very much? | The length of the screw you need will depend on how...
Comparing Bronze and Nylon Bushings for Trailer Suspension
whats better for trailer axles bronze or nylon bushings | It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part # K71-291-00, will last longer but are more noisy and it is recommended to use wet...
USA-Made Dexter 12 x 2-Inch Electric Drum Brakes for 2003 Mobile Suites Trailer with Tandem 7K Axles
I dont know if you remember me its been a little while I asked if your brakes are made in America and you replied yes Id like to order a set of Electric brakes for my 2003 mobile Suite with two 7000 pound axles which brakes do you recommend?...
I Need Wet Bolts And Shackles For My 2016 Forest River Wildwood 28DBUD
I have a 2016 Forest River Wildwood 28DBUD and I am looking for a wet bolt and shackle kit. I don’t see that model on your website. Would you have kits available for this model? Thank you. | We will definitely have kits that will work for...
Do I Need a Washer with Castle Nut to Install Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
Can you confirm the Dexter hub 8-91-05UC1 does not require a washer between the castle nut and outer bearing? My trailer didn’t have a washer on either hub. I contacted Dexter and they said that hub doesn’t require a washer and none of the...
Torque for 7,000 lb, 12 Inch x 2 Inch Dexter Electric Brakes
tourque value for the 5 plate mounting bolts?? | The Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs # 23-181 and Left Hand # 23-180 should should be torqued to 30-50 foot/lbs. |
Recommended Leaf Springs for Single 5,200 Axle
Hi my 6’ x 10’ single axle landscape trailer has a 5200lb non brake axle. I am wondering which leaf springs I should be ordering. I want the best capacity for this upgraded axle. Thank you | For your 5200 lb axle, I recommend the 6-Leaf Double-Eye...
Is There A Suspension Kit Which Contains 8" Long Straight Equalizers
I have a straight equalizer. But I need all the bolts and shackles. Is there a kit? Or I found kit AP233 for 52.83, but I dont need that type of equalizer. What do you recommend? | The Straight Equalizer 8" Long part # TREQR89 isn't offer in...
Are New Backing Plate Bolts Included With Electric Brake Assembly for 6K Axles # 23-459
do the never-adjust brake assemblies come with backing plate bolts or do I reuse the old ones? | I walked out to the warehouse to look at the Electric Brake Assembly for 6K Axles, part # 23-459. The brake assembly does not include the backing...
What is Needed to Switch From TREQE1 Equalizer to Shorter TREQ310 Equalizer
I currently have the treqe1 equalizer 7-3/4 inches on my trailer and would like to install the treq310 6 inches what will I need to complete this since the center to center holes are different lengths | Assuming you currently have 2-1/4" or...
Recommended Mounting Hardware for 12 Inch Electric Brake Assemblies # 23-106-09
What mounting hardware bolts and nuts are needed with the 4 bolt flange? | The brake mounting bolt for 12 inch electric brakes # 23-106-09, that you referenced are part # 7-5 for the bolt. For the matching lock washer and nut you will need...
How to Determine the Correct Slipper Spring for 6,000 lb Axle
6 k dexter axles 15 inch tires and rims e rated tires rims 6 hole rims slipper springs need three for my 34 ft pj trailer car / equipment trailer 83 inches between fenders Thanks | The slipper spring we carry for 6,000 lb axles is the 5-Leaf...
Comparing Different Hydraulic Trailer Brakes for Boat Trailer
Im working on my 2 axle boat trailer with 10 inch hydraulic brakes. Id like to get the full assembly for both sides. On your site I see the AKFBBRK-35, another AKUBRK-35-D, and another 40716-15. This trailer holds a 22 foot fiberglass boat....
Replacement Leaf Springs for Single Axle Trailer with 26 Inch Long Old Leaf Springs
I have a camper with a Lippert axle. The trailer came with a 3500 pound axle but I had tire wear issues and Lippert gave me a 4400 pound axle which took care of the tire wear issue. I want to put on new springs and want to move up to the 4000...
Can You Get etrailer Suspension Kit E99ZR without Hangers?
I need to purchase E99ZR suspension package but dont need the hangars, any options. thanks kindly. Joe | No problem! It's not all going to be as a kit but you'll need the following part's and quantities: (2) Equalizers # TREQE1 (8) Shackle...
Replacing the Brakes on a 1966 Airstream Travel Trailer
Hi, Will these brakes fit a 66 Airstream? I cannot find any info on the bolt centers or axle hole diameter. The current brakes are the original Kelsy-Hayes. Thank you. | The Dexter Electric Trailer Brake Kit part # 23-112-113 is designed for...
Replacement Suspension Components for 6,000 Lb Axles with 25-1/4 Inch Long Leaf Springs
I have attached a photo of the dimensions for my suspension components. Can you please remmoned the correct leaf springs, equalizers, shackle straps, u-bolts, and suspension bolts? I have Dexter 6K axles Thanks, | Thanks for the photo! I have...
Parts Needed to Replace 2000 lb Axle and Suspension
I need new suspension.. Have this in my cart: 20545I-EZ-72-15 axle w/hubs SP-124275 leafs K71-385-00 springs overkit Is this all compatible? If not, what should I get for the ubolt axle swap? Also, do you sell the spring/shackle bolts?...
Parts Needed to Install Electric Trailer Brakes on a Pop-Up Camper
Hi, Id like to install brakes on this pop-up camper. It did not come with brakes but it was an option and it already has the 4 hole flange on the axle. It currently has 20.5x8x10 tires and each wheel has 5 holes. Am I correct in thinking that...
What Size Cotter Pin is Used with Replacement Axle Bolt Kit for Yakima Rack and Roll Trailers
I was wondering if anyone would have the size of the cotter pin or the part number to order just the cotter pin. Thanks | I went out to the warehouse and pulled Replacement Axle Bolt Kit # Y8880180 to measure the cotter pin in the kit. The pin...
Recommended Hubs Drums And Electric Brakes For 2000 Trails West 4 Horse Trailer
i have a 2000 trails west 4 horse slant trailer with partial living quarters. i have 8 lug axles. i was wondering if you guys have the complete electric brake with backing plates and hubs with bearings. if so what are the part#s that would...
Using Wet or Dry Shackle Bolts in Rear Leaf Spring Hanger of Single Axle Trailer
Hello, I am planning on ordering these rear hangers for my single-axle trailer. I understand how they should be mounted/welded to the frame. I will be using shackle straps TRSL225 and shackle bolts 166081 for my setup. Is it okay for the...
Recommendation For Axle-Less Suspension System And Electric Brakes
Please recommend hubs, 5 on 4-1/2inch bolt circle and electric brakes that fit ASR35HDS02. This will be an off-road style trailer with an expected max gross weight of 1600 lb. Thx- | The axle-less trailer suspension system I recommend is...
Filter Your Search
Contact and Help