Will EZ Connector 7-Way Kit 319-R7-06 Fit 2015 Coachman Mirada
WILL THIS FIT MY 2015 COACHMAN MIRADA. I BELEAVE ITS ON A FORD F53 CHASSIs. | Yes the EZ Connector Custom Vehicle Wiring Harness # 319-R7-06 that you referenced will fit the 7-way connector you have on your 2015 Coachman Mirada. |
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Can The 2-1/2" Hitch Receiver # BP82FR Bolt to Combination Pintle Hitch w/ 2-5/16" Ball # BP38FR?
Will these holes match up to the buyers products 15 ton combo pintlex2-5/16 ball combo hitch you sell? Thanks in advance! | The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver # BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally....
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Timbren Helper Spring Fit for 2007 Ford F-650
I currently have 6” of vertical clearance measured from the top of axle housing to the bottom side of my frame rail.it’s my understanding the timbren system once installed should be 1” clearance above the axle housing.I can find any dimensions...
Options for Controlling Trailer Electric Brakes with Tow Vehicle Air Over Hydraulic Brakes
I saw some recommendations and a tutorial on your website for installing a trailer brake controller for a trailer with a 7-way plug and truck with air brakes. I have a truck 2008 Ford F650 with air over hydraulic brakes. Would this be the...
Replacement Inner Tube For Gooseneck Trailer Coupler That Doesnt Use Through Pin
We recently got a new truck, its an F750 and our trailer doesnt sit level. Weve lowered the gooseneck as far as we can. I see a few Bulldog products you have that would allow me to replace the interior pipe on the hitch to give me the additional...
Help Leveling 5TH Wheel Camper After Installing GEN-Y 5TH Wheel To Gooseneck Pin Box Adapter
I purchased this hitch last fall and just had an opportunity to get it installed and hooked up to the truck this weekend. The trailer is much higher in the front than the back. Any suggestions to get it leveled? | It looks like you have the...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Is there a Reese Super Titan Trailer Hitch that Bolts On for a 2004 Ford F-750 Funmover RV
Hi, I would like to install a Super Titan hitch on my 2004 Ford F-750 Funmover class-C RV. The truck has a lift gate and has 1 foot extensions bolted onto the frame rails with a doubler section of c-channel. I dont feel too confident about welding...
Finding Stoplight Switch for Installing Brake Controller in 2019 Ford F-750
Need know colors to hardwire brake controller to on a 2019 f750 with air braked, trailer has electric brakes. Whete does stoplight wire into since no switch due to air brakes | We don't have the install wiring colors of the brake controller...
How to Prevent Sagging on my 2005 Ford F-750 Dump Truck
Recommend rear sumo springs or timbren system for 2005 ford f750 dump truck 2wd. To help correct sagging | I have two really good options for you to solve this sagging issue. Great news is they can be used together if you choose to. The first...
Gooseneck Trailer Hitch Options For a 2013 Ford F-650
IM LOOKING FOR A GOOSENECK HITCH FOR 2013 FORD F-650 CAB and CHASSIS 34 FRAME WIDTH | I have a couple options for you as I do not see any custom fit gooseneck hitches available for your 2013 Ford F-650 Cab and Chassis. First is the Buyers Products...
Trailer Hitch for 2011 Ford F-650 Ambulance
2011 Ford F-650 Regular Cab 2WD DRW AMBULANCE, 6.7L L6 DIESEL. Which model number would I need for this vehicle? | I do have an option for you, however there are not any custom fit trailer hitches available that will work for your 2011 Ford...
How Wide is the Draw-Tite Super Titan 4000 Hitch 38208
I need the total outside dimension, left to right, out side of square tube to outside of square tube. | The Super Titan 4000 Trailer Hitch w/ 3" Square Dual Ball Mount, 2" and 2-5/16" Balls # 38208 is 34" overall width when measured from the...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Is There a Hitch Plate Available For a 2008 Ford F-650?
im looking for a hitch plate for a 2008 Ford F650,is this available? | While we do not have a custom fit hitch plate for your 2008 Ford F-650 you are able to use one of the universal kits from the list below. I listed the dimensions of the main...
Easy to Install Brake Controller Recommendation for 2009 Ford F-750
Hi- I’m looking for a plug and play brake controller for a 2009 ford f750. Would this item work? Or would I need a different one? Thank you | I have a really easy to use Curt brake controller solution for your 2009 Ford F-750 but we don't have...
Is Lippert Components High-Speed Power Stabilizer Jack # LC298707 Sold as Set or Individually
does the lc298707 come as a pair to do both ends of my travel trailer or do I need to order two to | The Lippert Components High-Speed Power Stabilizer Jack # LC298707 comes as a set for either the front or back of an RV. To do the front and...
Where Is the Brake Controller Port On An Entegra Coach Vision Motorhome
Trying to find the wires or connector in a 2020 entegra vision motorhome. Ford chassis | The Entegra Coach Vision is built on a Ford F-53 Chassis which means there should be a pre-wired brake controller port under the dash. The exact location...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Building a Complete Trailer Axle with Wheels that Have a 5 on 5 Bolt Pattern
Im looking to build a trailer soon. I already have wheels and tires with a 5 on 5" bolt pattern. I still need an axle, suspension, hubs and drums, and brakes. What do you recommend? | We have what you need here! To start with your axle, we...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Does Wiring Connector Plug for Brake Controller Exist on 2000 Ford F-650
I have a 2000 Ford f650 and would like to add a trailer brake controller. Is there a wiring connector to plug into the factory wiring under the dash? | Not that we know of, but that doesn't mean it doesn't exist. Brake controller manufacturers...
Filter Your Search
Contact and Help