!Liberty Travel Trailer  x   >   !GL-Class  x   >   !RX 450h  x   >   Quick Fist  x   >  

The video shows how to secure objects with the mini clamp. How do you open it to release the object? | You would need to pull the handle of the Quick Fist part # QF30050 down and away from the item it is securing so that you can stretch it...

I was wondering what the best solution would be and the appropriate method to mount this to my enclosed trailer walls. The walls studs are 16inch apart and the walls are luan backed vinyl. I was thinking of either putting the centre hole through...

I was wondering if the quick fist rubber clamps if they are silicone free | I contacted the manufacturer, Quick Fist, who told me the Quick Fist 3" Clamp - 2-3/4" to 3-1/4" Inner Diameter - Rubber - 50 lbs # QF50050 is silicone-free and that...

What are the outside dimensions length and width and hole spacing on the base of this large Quick fist holder? Looking forward to hearing back from you. Thank you so much for your time. | The base on the Quick Fist Super Clamp # QF20020 is...

You have wonderful instructions, video, andc., regarding the installation of your rubber extinguisher restraint, but not ONE WORD about how one releases the strap. Does one simply pull outward on the strap to release? It really would be good...

How do I attach this without using a screw or bolt system?? | To install the Quick Fist Original Clamps # QF10010 you have to run a bolt through the center of the clamp to the wall you want to attach it to like what is shown in the install video...

Would these work for attaching a bird feeder to a railing? To keep squirrels from knocking it off... | As long as the bird feeder is on a pole that is between 1 inch and 2-1/4 inch in diameter the Quick Fist Clamp part # QF10010 will fit and...

I need a trailer hitch for a 2018 Ford Edge, will this fit and work well? | Yes, the Draw Tite hitch part # 75234 that you referenced fits the 2018 Ford Edge SE/SEL, Sport, and Titanium models so this would fit and work well for you. |

Will these hold an axe handle?? | As long as the axe handle is between 1 and 2-1/4 inches in diameter the Quick Fist Original Clamps # QF10010 that you referenced are going to fit and work well. |

i am curious as to the closed dimensions of the strap...i am looking for something similar that I can use to lock my kayak paddles on my trailer while traveling. | I have just the product line for you. Take a look at Quick Fist Long Arm Clamps...

The metal propane strap in one of our Solitude 5th wheel propane compartments has broken off at the point of mounting. Can these straps be used as a replacement to the standard metal straps used in an RV? The compartments hold 30lb tanks....

If clamped down tight to a pole and not bolted onto something, would the clamp part be likely to twist around te pole?? | If you clamped something pretty tight with the Quick Fist Mini Clamps # QF30050 that you referenced you would not be able...

Will this work to vertically hold brooms or mops or are the better suited to hold one tool with two clamps, horizontally? | You could pretty easily hold brooms or mops vertically with the Quick Fist Mini Clamps # QF30050 that you referenced....

How wide is the bottom part... the side that mounts against the wall?? | The side of the Quick Fist Tie Down Strap # QF10010 that mounts to the trailer wall measures 2-1/2" x 3/4". |

Is the base metal or plastic? And would rivets hold it in place?? | The Quick Fist Tie Down Strap # QF10010 that you referenced is made of transportation grade rubber and has a metal spacer that the bolt slides through so it mounts securely. |

How easy are these to unlatch? The photos all show tools held horizontally....do they hold things vertically as well?? | The Quick Fist Original Clamps # QF10010 that you referenced are easy to latch and unlatch but also hold the items very...

can they be attached to Yakima bars? | Yes, since the Yakima crossbars are 1-1/8 inch in diameter and the bar width range of the Quick Fist part # QF10010 is 1 inch to 2-1/4 inch this will fit on a Yakima crossbar. |

I want to use the factory mounting holes on the roof and install grips/eyebolts/clamps or something similar to securely attach a tarp to for camping. I dont need a whole roof rack system. What would you suggest to create a watertight attachment...

Hello, I saw an item on your website with Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms - Channel Mount - Folding Item RR43196. The picture was submitted by Don B. It has the Rhino-Rack mount in the back. I was wondering...

Hey I see you al have the 38 rubber quick tie down straps and i need something similar but instead its only about .5 wide. do you happen to have a version that matches what i need? | All the rubber straps like the Quick Fist Tie-Down Belt w/...

Can you recommended a frame mount hitch and bike rack for our Forest River Micro-Lite 21 FBRS? Im not even going to attempt attaching anything to the bumper. Im looking to attach a bike rack and 2 bikes. Maybe 250# max. Regards | Starting...

Could use this for keeping 2inch PVC organized and 1/2inch black iron pipe? | The Side Wall Adjustable Shelf Supports # RA-24 would work much better for PVC pipe organized than it would the black iron pipe. The issue with the pipe is the weight....

Camco Stabilizing Base for 20-lb or 30-lb Propane Cylinder Item # CAM57236 I know this is advertised to hold the regular propane tanks, but would it work for the small 4.5 gal/1lb tank? Thanks. | Both the Camco Stabilizing Base for 20-lb or...

I would like to mount these on the underside of my truck tool box lid, to store items that weigh about 15lbs. My question is, once I close the lid will the clamp still hold the item, even if upside down? Thanks | Yes, since the jaws are what...