Is There A 4' Long x 6" Wide Continuous Hinge With A 1/2" Pin Size Available
I need a 4’ hinge x 6” , 1/2” pin. Do you have that or do I need to buy a 6’ hinge and cut it down? Thanks | We do not currently carry a continuous hinge in a 4' length so you would need to get the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin...
Can the 4" Wide Continuous Hinge MA85VR Be Cut To a Different Length?
Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...
Does The Marlboro Continuous Hinge Come With Pre-Drilled Mounting Holes
The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...
How is Pin of Trailer Barrel Hinge Secured
How is the pin retained? | Barrel hinges like the Weld-On Barrel Hinge with Grease Zerk # MA29ZR can be installed in two ways. One where the hinges face the same direction which allows the door to be lifted off the hinges if ever needed and...
Can The Marlboro Continuous Hinge Be Cut Down To Fit Different Lengths
I have a vertical application where I am hanging a heavy mirror with large wood frame to a wall, for it to swing out like a door. Im confident this will take the weight 55 lbs. However, i only need 65 inches in length. Can i cut the bottom...
Replacement Door Hinge For A 1992 Skyline Nomad Travel Trailer
Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...
Does The Weld-On Hinge MA66ZR Have A Weight Rating?
how much weight can these hold 3 of them on a 300 lb door | The Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR you were looking at does not have a weight rating, but I reached out to my contact at Marlboro who makes this hinge and...
Replacement Hinge for Storage Door
I am looking for a replacement hinge for my storage door for my 2019 Forest River, Sandpiper 384QBOK 5th wheel ? | I would be happy to help you but I do not have any way of knowing what hinge is currently on your 2019 Forest River Sandpiper....
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
How Thick is the Metal Used For the Butt Hinge w/ Non-Removable Pin # MA37ZR
Ma37zr hinge Need to know thickness of metal | The Butt Hinge w/ Non-Removable Pin # MA37ZR is 0.180" thick or approximately 3/16". It works great for heavy-duty trailer doors or ramp doors that typically require multiple hinges. |
Will the Marlboro Butt Hinge Work With a B Fold Utility Ramp Gate
part number MA37ZR, will these hinges support a b-fold utility trailer ramp gate? I want to use them for the folding part of the ramp, I would use three of them | Yes, the Butt Hinge w/ Non-Removable Pin # MA37ZR will hold your ramp just fine....
Is there A Weight Capacity for the Marlboro Continuous Piano Hinge
What is the weight limit on these hinges? Looking to make a hinged queen size murphy type bed in our cargo trailer. | Marlboro piano hinges like the 3" Wide Continuous Hinge # MA74ZR you're looking at do no have weight capacities. Marlboro mentions...
What 3" Wide, 6' Long Hinge Has a 3/16" Thick Side Plate?
I was needing to know the thickness of the plate on both sides of the barrel. It looks to be about 1/8”, but was needing to know for sure before I order. I need it to be at least 3/16” | The side plates on the 3" Wide Continuous Hinge # MA65VR...
Does The 4" Wide Continuous Hinge Have A Rust Preventative Coating?
Does this hinge have any kind of coating to prevent rust? Or does it need painted? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter # MA85VR is made from mill finished steel with a commercial die cut quality, however they are not...
Does 3" Wide Continuous Hinge # MA75VR Have Holes Pre-Drilled
Does it come with pre drilled holes? | The 3" Wide Continuous Hinge # MA75VR that you referenced does not come with holed drilled. We do not have any similar options that are pre-drilled. |
Does Weld-On Barrel Hinge MA29ZR Have Weight Capacity? Thanks
How much weight can this hinge hold? Thanks | Hinges such as the Weld-on Barrel Hinge # MA29ZR are not given specific weight ratings as that is at the discretion of the fabricator. There's way too many variables to give a standard weight rating. I'd...
Replacement Grease Zerk Fitting for MORryde 3000
I have a Morryde 3000 on my fifth wheel. What size zerk fitting do I need. Back zerk broke off . Thank you | The grease zerk fitting on your MORryde 3000 is M6 x 1.0 according to my contact at MORryde. To replace this you need the following...
Aluminum Piano Hinge for Outdoor Use That is 4" Wide
looking for a piano hinge stainless steel or Aluminum min opening of 4 max opening 6 66 inches long heavy gauged material for wet out door application | We only have one piano hinge that is either 4" or 6" wide and constructed of either stainless...
Weight Capacity of Weld-On Hinge w/ Brass Bushing and Grease Zerk
can you tell me what weight these hinges are rated for? Weld-On Hinge w/ Brass Bushing and Grease Zerk - Steel - 3-3/16inch Long - 5/16inch Pin Diameter Item # MA39ZR | The weight capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk...
Can The 4" Wide Continuous Hinge Be Cut Down To A Different Length?
Was thinking about using something like this on a belt puller clamp, but we do not need the full 6foot length. Could we cut this down to something around 16-18? If no we may just weld on a couple smaller hinges | Yes, the 4" Wide Continuous...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
Can 6" Wide Continuous Hinge - 8' Long be Cut Down to 7 Foot
Can I cut it down to 7’ and not rune it? | Yes, you can cut the 8 foot long hinge kit part # MA32VR down to 7 feet in length and it would work great. |
Can The Marlboro Continuous Hinge Be Cut Down To Fit A Palomino Pop-Up Truck Bed Camper Door
I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
Filter Your Search
Contact and Help