Recommended Trailer Brake Controller and Wiring for 2005 Pontiac Vibe
I have a 05 Pontiac Vibe I need to wire it up to tow a pop up camper that has electric brakes so I will need a brake controller. Just not sure what I need.... The standard harness plus the Universal Installation Kit for Trailer Brake Controller...
Hitch and Bike Rack Recommendation for a 2003 Pontiac Vibe
Hello, I need a hitch for my Vibe that has a 2inch receiver. W hat do you suggest? Everything I see is a 1 1/4 receiver. This is for a bike rack that has a 2inch not a 1 1/4, dont want to reduce down, will add too much play and bounce. Thanks,...
Will the SportRack Vista Roof Cargo Box Fit a 2004 Pontiac Vibe with Factory Roof Rack
Will this carrier fit a 2004 Pontiac Vibe with a factory-installed roof rack that includes cross bars? And will it mount without the rooftop antenna having to be removed? | The SportRack Vista cargo box # SR7018 will fit on crossbars that are...
Will My Hitch Ball Fit the Curt Class II Round Tube Trailer Hitch on my 2004 Pontiac Vibe
Does this hithch come with a hitch-ball? I already have a U-haul hitch-ball I bought for a 91 jeep cherokee. Can I use it with this hitch? On the metal bar is stamped: V-5 U-haul Max load 3500 lb Tongue wt 350 lb On top of the ball is stamped: U-Haul...
What is Shank Rise for Hollywood Rack Bike Rack # HR200
please explain shank rise | The Hollywood Rack Bike Rack part # HR200Z has a shank rise of 5 inches which means the curve you see in the shank (the portion that attaches to the trailer hitch and the rest of the rack), goes up a total of 5 inches...
Does the Heat Shield on a 2007 Pontiac Vibe have to be Trimmed to Install a Trailer Hitch
The description for this hitch receiver states Heat shield modification may be required. Are any modifications needed to the heat shield of my 2007 Pontiac Vibe non-GT model to install this product? Thank you. | The only note in the actual instructions...
Trailer Hitch Recommendation for Carrying 4 Bike Rack with 2007 Pontiac Vibe
Hello,I have a Curt 4 bike carrier.Cant decide on a hitch. C12234 class2 with 4 bolt mounting or 24812 Draw Tite class1 6 bolt mounting,with the same ratings.200/2000.Does it make a difference with the same ratings?.I read the C12234 hits the...
Overall Length of Replacement Top Tube Pad # 8537418
Can you tell me the length in inches of the Thule Hull-a-Port top tube pad, part # 8537418? | The overal length of the Replacement Top Tube Pad # 8537418 that you referenced is 7-1/2 inches. |
Trailer is not Level When Towing with Recommended Drawbar
I purchased this hitch and the recommended drawbar but my trailer is not level when towing. Front is lower, is there anthing I can do to get my trailer level? | The instructions (see link below) state that the drawbar must be used in the rise...
Is Hardware Included with Draw-Tite Hitch 24812?
The description doesnt mention if the mounting bolts and washers are included. I was wondering if I needed to pick some up? Thanks | Yes, all the necessary hardware and instructions are included with all of our hitches. |
Adding Larger Wheels to Trailer Hub Assembly with Same Bolt Pattern
I am looking at 8-259-5UC1-EZ. It says they are for 8-12 inch wheels. Is there some reason it wouldnt work for bigger wheels as long as the bolt pattern is correct? I ask because I have hubs similar to this and want to put bigger 13inch or 15inch...
Will Rightline Cargo Hatch Saddlebag # RL100B90 Fit 2007 Pontiac Vibe
Im moving from Wisconsin to Washington State. Will the saddlebag fit my 2007 Pontiac Vibe. I dont want to get the rooftop cargo carrier as I will be driving through mountains and was told the rooftop carriers can cause problems. Thanks. | As...
Availability of 2 Inch Trailer Hitch for 2006 Pontiac Vibe
Do you make a bolt on trailer hitch for a 2006 Pontiac Vibe suv that has a 2inch square receiver ? | The available trailer hitches that are confirmed to fit your 2006 Pontiac Vibe all have 1-1/4 inch receivers. This is likely because the vehicle...
What Base Plate Do You Recommend for My 2005 Pontiac Vibe?
Have a 2005 Pontiac vibe. Looking for a base plate for it | For a great quality base plate for your 2005 Pontiac Vibe, I recommend the Blue Ox Base Plate Kit - Removable Arms # BX3224. The Blue Ox plate comes with a custom-fitting that will...
Transmission Cooler Recommendations for 2005 Pontiac Vibe
Can you tell me if you have a cooler for an 05 Pontiac Vibe. Not GT. | A transmission cooler is not a vehicle-specific item, it can be installed on just about any vehicle that has an automatic transmission. The best and most efficient place...
What Can I Use to Carry a Canoe on a 2004 Pontiac Vibe with Factory Raised Rails
I have a 100 lb. fiberglass canoe 14 long and am trying to determine if there is a roof rack system that I can use to transport it on my 2004 Pontiac Vibe which has factory side rails but no cross rails. I saw a Yakima base rack system that...
Comparing the Swagman XC and XTC-2 Platform Trailer Hitch Mount Bike Racks on a 2004 Pontiac Vibe
Hi- What are the differences between the Swagman XC2 and XTC-2 bike racks? We have two 30 lb dual suspension mountain bikes with tires that are almost exactly 2.5 in. wide. I am leaning toward the XC2 b/c of the tire width, but am not sure if...
Can Roadmaster Sterling Tow be Used to Flat Tow 2009 Pontiac Vibe GT
Hi, Ive recently acquired a motorhome that came with a tow bar and baseplate. I own a 2009 Pontiac Vibe GT that Id like to flat tow, and Im curious if the baseplate and tow bar I have will work with it. The motorhome came with a roadmaster...
Possible Solution to Install Hitch on Vehicle with Broken Weld Nuts
I knew when replacing my hitch Curt 12228 purchased etrailer order 107783101 on my 2009 pontiac vibe that two of the internally welded frame nuts were broken. I had to grind off the bolts after being rear ended and needing to replace the hitch....
Why is Draw-Tite Hitch a Class I and Curt Hitch is a Class II for a 2006 Pontiac Vibe
Draw Tite is classified as class I and Curt is classified as class II. When I look at the specs they have matching specs: 200lbs tongue weight and 2000lbs towing. What makes the Curt a class II and it only bolts with 4 bolts? Draw Tite...
Roof Rack Option for 2010 Pontiac Vibe
Hello, I have a 2010 pontiac vibe, and heres my problem : as the roof isnt really large, and to maximize the distance between the 2 racks bars, I need one to fix with the seal of the window on front, and another one fixed to the vibes fixed...
Does Conical Washer 01292-008 Fit Curt Hitch that Fits 2007 Pontiac Vibe
Will your 1/2 inch conical toothed washer fit the 12 mm bolt for my Curt trailer hitch on my 2007 Pontiac Vibe? Thank you. | Yes the Reese conical washer part # 01292-008 will work with the install hardware of the Curt hitch # C12221 that fits...
Does Tow Ready Custom Vehicle Wiring # 118458 Require a Battery Connection, 2003 Pontiac Vibe GT
I have an 03 Vibe GT. Does this particular harness need power run directly from the battery? if so, is all cable included? | The Tow Ready Custom Fit Vehicle Wiring, # 118458, does not require a direct connection to the battery when installing...
Is Heat Shield Modifcation Required to Install Curt Trailer Hitch # 12221 on a 2008 Pontiac Vibe
Is the triming of the heat shield necessary on a 2008 Pontiac Vibe. I havent found a video of the installation on said year, and no comments Ive read mentioned triming of the heat shield, but the Curt add says it might be necessary. | The Curt...
Filter Your Search
Contact and Help