Could Erickson E-Track Strap with Ratchet # E19148 Install at 90 Degree Angle over ATV Tire
I have both a SXS and a quad I want to strap down to my trailer. Problem is the quad is narrower then the SXS. However if I place quad 90 degrees across trailer it is about the same width. I would love to be able just to run one set of tracks...
Over the Cab Style of Ladder Rack Recommendation for 2009 Nissan Frontier With Utili Track
Does this rack fit a 2009 Nissan frontier crew cab with utili track? | I have a very similar ladder rack that does fit your 2009 Nissan Frontier crew cab with the utili track but the MaxxTow MT70232 that you referenced does not fit with the...
What No-Drill Ladder Rack Works with the BAKFlip MX4 # BAK448130 on My 2021 Silverado 1500 Short Bed
What drill-free ladder rack works with the BAKflip MX4 BAK448130 on my 2021 silverado 1500 with a 5-3/4 bed? | For a great drill-free ladder rack that is compatible with the BAKFlip MX4 # BAK448130 on your 2021 Chevy Silverado 1500 with a 5-3/4...
Can Accessoreis from the Tow-Rax L-Track be Used with the Erickson O-Track
Hi Do the accessories from L track work with O track and vis versa? Thanks | Yes, the Tow-Rax L-Track # TWSP24TA and the Erickson O-Track # EM59133 are the same when it comes to dimensions so you can interchange the accessories. |
What Is The Recommendation For Welding Erickson E-Track System
We install E track in steel bodies. Can E track be welded in and if so what would you recommend for weld size and spacing? | The typical installation of the Erickson Horizontal E-Track, part # E19148 is by installing bolts or screws through...
Car Tie Down Straps for Towing 2006 Chevy Equinox on a Flat Bed Trailer
I have a 2006 Equinox awd I will be towing this car on a flat bed trailer what type of tie down do you suggest and where to buy this product.Thank You | The heaviest model 2006 Chevy Equinox weighs just under 4,000 pounds, so if you use at least...
Can Rivets be Used to Install the Erickson Horizontal E-Track
Hey guys, could you use structural rivets for installing e-track. Would they be stronger the screws that could strip out or pull away? | Yes you can use screws or rivets to install the Erickson Horizontal E-Track # E19148. I don't really have...
How to Determine if Tool Box Will Fit with Ladder Rack on 2017 GMC Sierra 1500
I was wondering what the space is between the bottom brackets when installed on a GMC 2017 Sierra 1500. I was looking to get the Lund 70 inch side mount toolbox for ea. side. Lund 79772PB. Wil it fit in. Do you guys sell this box? | The great...
Additional Load Stops For Erickson Truck Bed Ladder Rack
Can you buy extra load stops for this rack system and if so, how much for four? I want to load two kayaks and be able to safely drive down the interstate. I think it would be ideal if I could secure each yak independently. Or, do you have...
Do You Carry A Small Cover For My 3.5' x 5' Foot Utility Trailer?
Do you guys have a waterproof cover small enough for a 3 5x5 catty on utility trailer? | The closest size tarp we carry is the Erickson All-Purpose Blue Tarp 5' x 7' # EM56999. This is a 7x7 weave which will do a good job keeping the water out. |
Recommended Enclosed Cargo Trailer Storage Cover
I have a 5x8 enclosed Cargo Trailer, and I want to get a storage cover for it. What do you recommend for this? Dimensions: Overall Length 11foot 10 Overall Width 7 *Overall Height 6foot 5 Interior Length 8foot 7 Interior Width 4foot 8 *Interior...
Dimensions of Loop End on Erickson Recovery Tow Strap part # EM59350
Im interested in this particular two strap 1 wide x 15 long and want to be sure that it has loops on both ends of the strap that are big enough to put comfortably put your hand in 8-10 loop. Please let me know if this is correct, as I need...
Cover for 4x8 Foot Utility Trailer
Hi, I want to install a cover for my utility trailer. It is a 4x8. Is there a cover for that size? Or a camper? | I have a solution for you but there isn't a specific cover for a utility trailer, and I've mostly seen people use a tarp like the...
Side Mount Ladder Rack Recommendation for 2018 Ford F-150
How can I confirm if this will fit my 2018 Ford F150? | We have a similar ladder rack that attaches to a bed rail like the Erickson part # EM07708 that you referenced but this specific one is not a fit so instead you'd want the DeeZee kit part...
What is the Spacing Between the Rungs on the Stallion Loading Ramp Set # 288-07489
What is the spacing between the rungs on the ramps? I have a set of ramps but the spacing is too much for smaller front ztr wheels. They get stuck between the rungs when loading. | The rungs on the Stallion Loading Ramp Set # 288-07489 that...
Can FloTool Wheel Chocks # FT11930MI be Used to Secure a Riding Mower or Push Mower in a Truck Bed
Will these chocks work to secure a riding or push lawn mower in the back of a pick up truck? If not, what is a better choice short of using straps? | The only chocks that would do a decent job of keeping a mower in place in a truck bed would...
Recommendation For Hauling Two Mobility Scooters
It’s going to get to the point where I’ll need to carry not one but two mobility scooters. Do you have a dual carrier? | While there aren't any cargo carriers that would fit two mobility scooters or even be able to handle the weight of two,...
Will Steel Erickson Truck Bed Ladder Rack w/ Load Stops Fit a 2018 Ford F-150
Your product # EM07706 shows warning of no confirmed fit on my 2018 Ford F150 and yet using your down model and year selection s it says this product will work on my truck. I think it will to, can you confirm? Thanks, Neil | Yes, the Erickson...
Ladder Rack Recommendation for Carrying Kayaks on a 2020 GMC Sierra 1500 6-1/2 Bed
What would work best for 2020 GMC Sierra 1500 AT4 6.5 bed, for carrying kayaks 17ft, #EM07705? Has a removable rollup tonneau cover now. | If you're wanting to use kayak cradles then the Erickson # EM07705 is my recommendation because it...
Are All of the E-track and X-Track Accessories Interchangeable
Is E-track standard size between different manufacturers - I have Kinedyne E-track in my trailer but Im looking at Erickson hardware. Thank you | That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson...
Recommended Tarp Cover for Open Bed Car Hauler
bed length 196 inch should be longer to cover back and front. To the hitch 20 feet. Width maybe between 8 and 10 feet if im covering tires Open bed car hauler cover | It sounds like you have an open trailer you are wanting to cover with a tarp....
Compatibility of Ladder Rack with 2019 Nissan Frontier 5' Bed and Utili-Track System
I have a 2019 Nissan Frontier pro 4X 5’ bed with utilitrac and bed liner. Would this be a good option for this truck? | The Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 will technically fit your 2019 Nissan Frontier 5' bed, but you're...
Single E-Track Anchor for E-Track Tie-Off Ring # 59131
Can you tell me where on your site I can find the slot that the individual used in this photo to put the ring into? | In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a...
Recommended Front Mount Receiver for Carrying Small Motorcycle on 2019 Ram 2500
I have a 2019 Ram 2500 new style. I am looking for a Front mount hitch to carry a motorbike. What would you recommend? The bike weight is approx 350lbs | I recommend the Curt # C31089 front mounted receiver which is a confirmed fit for your...
Filter Your Search
Contact and Help